Keyboard issue i cant use wire mode in fedora

Hello i have an issue with my tracer evo01 hotswap 63 keyboard,in bios i can use it in wire mode but on linux i need to use usb dongle wireless, and in some games my keyboard is missing layout? like games recognize wasd only other keys doesnt work. when i change to wire mode linux just cant see my keyboard,here is output of -lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1bcf:08b8 Sunplus Innovation Technology Inc. HID Gaming Mouse
Bus 001 Device 003: ID 03f0:089d HP, Inc HyperX Cloud III
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 3151:6001 YICHIP Wireless Receiver
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Welcome to Fedora :fedora:

Can you provide some dmesg logs

Please provide the output of dmesg | fpaste --raw-url

Also, do you have the Receiver still connected when you use the wire?

ok here is dmesg but i cant post all console output its too long

[   26.829689] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.829693] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   26.829697] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   26.829700] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   26.829703] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   26.829706] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   26.829709] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[   26.844457] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input21
[   26.844581] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input22
[   26.844713] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input23
[   26.844816] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input24
[   26.844916] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input25
[   26.845012] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input26
[   26.845131] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input27
[   26.845232] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input28
[   26.941887] usb 1-3: Warning! Unlikely big volume range (=18944), cval->res is probably wrong.
[   26.941896] usb 1-3: [2] FU [Speaker Volume Playback Volume] ch = 2, val = -18944/0/1
[   26.985897] usb 1-3: Warning! Unlikely big volume range (=18944), cval->res is probably wrong.
[   26.985904] usb 1-3: [5] FU [Mic Volume Capture Volume] ch = 1, val = -18944/0/1
[   26.986340] usbcore: registered new interface driver snd-usb-audio
[   27.024479] EXT4-fs (sdb2): mounted filesystem e8bbede6-7ed1-4bb0-a66d-887171842ca1 r/w with ordered data mode. Quota mode: none.
[   27.340873] RPC: Registered named UNIX socket transport module.
[   27.340878] RPC: Registered udp transport module.
[   27.340880] RPC: Registered tcp transport module.
[   27.340881] RPC: Registered tcp-with-tls transport module.
[   27.340883] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   27.810656] NET: Registered PF_QIPCRTR protocol family
[   28.766031] Generic FE-GE Realtek PHY r8169-0-2200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2200:00, irq=MAC)
[   28.933548] r8169 0000:22:00.0 enp34s0: Link is Down
[   30.518810] r8169 0000:22:00.0 enp34s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   33.575473] rfkill: input handler disabled
[   38.829964] systemd-journald[703]: /var/log/journal/17ede5e85d174e3d97f2b4fb0045fae4/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   39.262285] rfkill: input handler enabled
[   40.850441] rfkill: input handler disabled
[   48.276362] show_signal: 43 callbacks suppressed
[   48.276367] traps: vesktop.bin[3613] trap int3 ip:55f2c651ac8f sp:7fffd2b699d0 error:0 in vesktop.bin[55f2c25d6000+8642000]
[   58.542857] traps: gldriverquery[4412] general protection fault ip:7f5e7958ba3f sp:7ffd73700da0 error:0 in libLLVM.so.18.1[7f5e7920c000+3afa000]
[ 2452.828153] gldriverquery[13965]: segfault at 22 ip 00007f871958ce94 sp 00007fffbf71e6a0 error 4 in libLLVM.so.18.1[7f871920c000+3afa000] likely on CPU 11 (core 6, socket 0)
[ 2452.828178] Code: 00 49 89 47 08 48 85 c0 74 41 4c 8b 60 30 4c 8b 68 38 4d 39 ec 74 34 4c 8d 7c 24 10 66 2e 0f 1f 84 00 00 00 00 00 49 8b 04 24 <48> 8b 40 20 48 89 44 24 10 4c 89 f7 4c 89 fe e8 38 8c 00 00 48 89
[ 2532.660473] gldriverquery[15085]: segfault at ffffffffffffffff ip ffffffffffffffff sp 00007fffcb41f558 error 15 likely on CPU 11 (core 6, socket 0)
[ 2532.660487] Code: Unable to access opcode bytes at 0xffffffffffffffd5.
[ 2622.290927] SELinux:  Converting 681 SID table entries...
[ 2622.302847] SELinux:  policy capability network_peer_controls=1
[ 2622.302854] SELinux:  policy capability open_perms=1
[ 2622.302855] SELinux:  policy capability extended_socket_class=1
[ 2622.302857] SELinux:  policy capability always_check_network=0
[ 2622.302858] SELinux:  policy capability cgroup_seclabel=1
[ 2622.302860] SELinux:  policy capability nnp_nosuid_transition=1
[ 2622.302861] SELinux:  policy capability genfs_seclabel_symlinks=1
[ 2622.302862] SELinux:  policy capability ioctl_skip_cloexec=0
[ 2622.302863] SELinux:  policy capability userspace_initial_context=0
[ 5219.419347] usb 1-9: new full-speed USB device number 8 using xhci_hcd
[ 5224.930895] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5224.930902] usb 1-9: can't read configurations, error -71
[ 5225.048322] usb 1-9: new full-speed USB device number 9 using xhci_hcd
[ 5230.562883] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5230.562895] usb 1-9: can't read configurations, error -71
[ 5230.564854] usb usb1-port9: attempt power cycle
[ 5230.950321] usb 1-9: new full-speed USB device number 10 using xhci_hcd
[ 5236.194872] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5236.194886] usb 1-9: can't read configurations, error -71
[ 5236.310305] usb 1-9: new full-speed USB device number 11 using xhci_hcd
[ 5241.827114] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5241.827127] usb 1-9: can't read configurations, error -71
[ 5241.829087] usb usb1-port9: unable to enumerate USB device
[ 5395.776804] usb 1-9: new full-speed USB device number 12 using xhci_hcd
[ 5401.570390] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5401.570406] usb 1-9: can't read configurations, error -71
[ 5401.685806] usb 1-9: new full-speed USB device number 13 using xhci_hcd
[ 5407.202347] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5407.202362] usb 1-9: can't read configurations, error -71
[ 5407.204400] usb usb1-port9: attempt power cycle
[ 5407.589769] usb 1-9: new full-speed USB device number 14 using xhci_hcd
[ 5412.834429] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5412.834444] usb 1-9: can't read configurations, error -71
[ 5412.950777] usb 1-9: new full-speed USB device number 15 using xhci_hcd
[ 5418.467169] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5418.467177] usb 1-9: can't read configurations, error -71
[ 5418.469125] usb usb1-port9: unable to enumerate USB device
[ 5423.943730] usb 1-9: new full-speed USB device number 16 using xhci_hcd
[ 5429.731837] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5429.731843] usb 1-9: can't read configurations, error -71
[ 5429.847693] usb 1-9: new full-speed USB device number 17 using xhci_hcd
[ 5435.362125] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5435.362133] usb 1-9: can't read configurations, error -71
[ 5435.364067] usb usb1-port9: attempt power cycle
[ 5435.749680] usb 1-9: new full-speed USB device number 18 using xhci_hcd
[ 5440.994560] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5440.994572] usb 1-9: can't read configurations, error -71
[ 5441.110666] usb 1-9: new full-speed USB device number 19 using xhci_hcd
[ 5446.627261] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 5446.627269] usb 1-9: can't read configurations, error -71
[ 5446.629205] usb usb1-port9: unable to enumerate USB device
[ 7219.555654] usb 1-9: new full-speed USB device number 20 using xhci_hcd
[ 7225.308207] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 7225.308221] usb 1-9: can't read configurations, error -71
[ 7225.423654] usb 1-9: new full-speed USB device number 21 using xhci_hcd
[ 7230.940330] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 7230.940346] usb 1-9: can't read configurations, error -71
[ 7230.942363] usb usb1-port9: attempt power cycle
[ 7231.327617] usb 1-9: new full-speed USB device number 22 using xhci_hcd
[ 7236.572647] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 7236.572660] usb 1-9: can't read configurations, error -71
[ 7236.688604] usb 1-9: new full-speed USB device number 23 using xhci_hcd
[ 7242.204661] usb 1-9: unable to read config index 0 descriptor/start: -71
[ 7242.204674] usb 1-9: can't read configurations, error -71
[ 7242.206674] usb usb1-port9: unable to enumerate USB device

and here is link of pastebin for dmesg
https://paste.centos.org/view/raw/42cdc2a6

when i change to wire mode it doesnt work,even without usb reciver my keyboard only works on reciver

1 Like