Hello. I have a HP pavilion laptop. Since I installed Fedora 31 Workstation, from scratch (default installation, then installation of a few applications), the touchpad works as if there were only a unique button: the primary one. Just before that, with Fedora 29 (or 30? I’m not sure.), the 2 buttons used to work. This laptop has had keyboard difficulties (Sometimes some keys don’t work for a while, and seem to work when the laptop is warm.) and I don’t use it very often, so I’m not sure the difficulty comes from Fedora 31. But I had never noticed any problem with the touchpad before the installation of Fedora 31, and now the right button never works (well, it works, but as if it were the left one). Any idea?
Hi. If this seems related: something about “IRQ” (Ask Fedora)?
Could you please attach the results of the following cmds:
dmesg
lspci -vvv
uname -a
cat /proc/interrupts
Thanks
dmesg 1:
[ 0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[ 0.000000] Linux version 5.3.16-300.fc31.x86_64 (mockbuild@bkernel04.phx2.fedoraproject.org) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Fri Dec 13 17:59:04 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.3.16-300.fc31.x86_64 root=/dev/mapper/fedora_localhost–live-root ro resume=/dev/mapper/fedora_localhost–live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000084fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000085000-0x0000000000086fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x000000007588efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007588f000-0x00000000758b9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000758ba000-0x00000000788b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000788ba000-0x00000000791c9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000791ca000-0x00000000792c9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000792ca000-0x0000000079309fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007930a000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x79309014 ESRT=0x789f2318 SMBIOS=0x78a96000
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Stream Notebook PC 13/802A, BIOS F.14 08/25/2015
[ 0.000000] tsc: Detected 2165.800 MHz processor
[ 0.000022] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000026] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000037] last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000043] MTRR default type: uncachable
[ 0.000044] MTRR fixed ranges enabled:
[ 0.000047] 00000-9FFFF write-back
[ 0.000049] A0000-BFFFF uncachable
[ 0.000051] C0000-FFFFF write-protect
[ 0.000053] MTRR variable ranges enabled:
[ 0.000056] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000058] 1 base 000000000 mask F80000000 write-back
[ 0.000060] 2 base 07C000000 mask FFC000000 uncachable
[ 0.000063] 3 base 07B000000 mask FFF000000 uncachable
[ 0.000065] 4 base 07AE00000 mask FFFE00000 uncachable
[ 0.000066] 5 disabled
[ 0.000068] 6 disabled
[ 0.000069] 7 disabled
[ 0.000156] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.006001] esrt: Reserving ESRT space from 0x00000000789f2318 to 0x00000000789f2350.
[ 0.006016] BRK [0x3c001000, 0x3c001fff] PGTABLE
[ 0.006019] BRK [0x3c002000, 0x3c002fff] PGTABLE
[ 0.006022] BRK [0x3c003000, 0x3c003fff] PGTABLE
[ 0.006097] BRK [0x3c004000, 0x3c004fff] PGTABLE
[ 0.006101] BRK [0x3c005000, 0x3c005fff] PGTABLE
[ 0.006153] BRK [0x3c006000, 0x3c006fff] PGTABLE
[ 0.006407] BRK [0x3c007000, 0x3c007fff] PGTABLE
[ 0.006546] BRK [0x3c008000, 0x3c008fff] PGTABLE
[ 0.006640] BRK [0x3c009000, 0x3c009fff] PGTABLE
[ 0.006689] RAMDISK: [mem 0x736a1000-0x75438fff]
[ 0.006701] ACPI: Early table checksum verification disabled
[ 0.006705] ACPI: RSDP 0x0000000079309014 000024 (v02 HPQOEM)
[ 0.006711] ACPI: XSDT 0x0000000079309120 0000AC (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.006720] ACPI: FACP 0x0000000079306000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP 00040000)
[ 0.006730] ACPI: DSDT 0x00000000792F5000 00BB6D (v02 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[ 0.006736] ACPI: FACS 0x0000000079291000 000040
[ 0.006741] ACPI: UEFI 0x0000000079308000 000236 (v01 HPQOEM 802A 00000001 HP 00040000)
[ 0.006747] ACPI: MSDM 0x0000000079307000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.006753] ACPI: HPET 0x0000000079305000 000038 (v01 HPQOEM 802A 00000003 HP 00040000)
[ 0.006759] ACPI: LPIT 0x0000000079304000 000104 (v01 HPQOEM 802A 00000003 HP 00040000)
[ 0.006765] ACPI: APIC 0x0000000079303000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP 00040000)
[ 0.006771] ACPI: MCFG 0x0000000079302000 00003C (v01 HPQOEM 802A 00000003 HP 00040000)
[ 0.006777] ACPI: SSDT 0x0000000079301000 00053A (v01 HPQOEM 802A 00000003 INTL 00040000)
[ 0.006782] ACPI: SSDT 0x00000000792F3000 0010A6 (v01 HPQOEM 802A 00000003 INTL 00040000)
[ 0.006788] ACPI: SSDT 0x00000000792F2000 000763 (v01 HPQOEM 802A 00003000 INTL 00040000)
[ 0.006794] ACPI: SSDT 0x00000000792F1000 000290 (v01 HPQOEM 802A 00003000 INTL 00040000)
[ 0.006800] ACPI: SSDT 0x00000000792F0000 00017A (v01 HPQOEM 802A 00003000 INTL 00040000)
[ 0.006806] ACPI: UEFI 0x00000000792EF000 000042 (v01 HPQOEM 802A 00000000 HP 00040000)
[ 0.006812] ACPI: SSDT 0x00000000792E9000 005E55 (v01 HPQOEM 802A 00001000 INTL 00040000)
[ 0.006818] ACPI: SSDT 0x00000000792E8000 0002F5 (v01 HPQOEM 802A 00001000 INTL 00040000)
[ 0.006824] ACPI: FPDT 0x00000000792E7000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.006830] ACPI: BGRT 0x00000000792E6000 000038 (v01 HPQOEM 802A 00000001 HP 00040000)
[ 0.006844] ACPI: Local APIC address 0xfee00000
[ 0.007034] No NUMA configuration found
[ 0.007036] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[ 0.007055] NODE_DATA(0) allocated [mem 0x784ad000-0x784d7fff]
[ 0.019555] Zone ranges:
[ 0.019559] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019562] DMA32 [mem 0x0000000001000000-0x0000000079ffffff]
[ 0.019565] Normal empty
[ 0.019566] Device empty
[ 0.019568] Movable zone start for each node
[ 0.019575] Early memory node ranges
[ 0.019577] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.019579] node 0: [mem 0x0000000000070000-0x0000000000084fff]
[ 0.019581] node 0: [mem 0x0000000000087000-0x0000000000087fff]
[ 0.019582] node 0: [mem 0x0000000000100000-0x000000001effffff]
[ 0.019584] node 0: [mem 0x000000001f100000-0x000000001fffffff]
[ 0.019586] node 0: [mem 0x0000000020100000-0x000000007588efff]
[ 0.019588] node 0: [mem 0x00000000758ba000-0x00000000788b9fff]
[ 0.019590] node 0: [mem 0x000000007930a000-0x0000000079ffffff]
[ 0.019667] Zeroed struct page in unavailable ranges: 3319 pages
[ 0.019670] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[ 0.019674] On node 0 totalpages: 496393
[ 0.019676] DMA zone: 64 pages used for memmap
[ 0.019678] DMA zone: 22 pages reserved
[ 0.019679] DMA zone: 3972 pages, LIFO batch:0
[ 0.019805] DMA32 zone: 7744 pages used for memmap
[ 0.019807] DMA32 zone: 492421 pages, LIFO batch:63
[ 0.034362] x86/hpet: Will disable the HPET for this platform because it’s not reliable
[ 0.034371] Reserving Intel graphics memory at [mem 0x7b000000-0x7effffff]
[ 0.034476] ACPI: PM-Timer IO Port: 0x408
[ 0.034480] ACPI: Local APIC address 0xfee00000
[ 0.034494] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.034496] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.034498] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.034500] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.034513] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.034517] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.034520] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.034523] ACPI: IRQ0 used by override.
[ 0.034525] ACPI: IRQ9 used by override.
[ 0.034528] Using ACPI (MADT) for SMP configuration information
[ 0.034531] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.034550] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.034595] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.034599] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.034603] PM: Registered nosave memory: [mem 0x00085000-0x00086fff]
[ 0.034606] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[ 0.034608] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.034612] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[ 0.034616] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.034620] PM: Registered nosave memory: [mem 0x7588f000-0x758b9fff]
[ 0.034624] PM: Registered nosave memory: [mem 0x788ba000-0x791c9fff]
[ 0.034625] PM: Registered nosave memory: [mem 0x791ca000-0x792c9fff]
[ 0.034626] PM: Registered nosave memory: [mem 0x792ca000-0x79309fff]
[ 0.034630] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.034632] Booting paravirtualized kernel on bare hardware
[ 0.034638] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.258297] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.259165] percpu: Embedded 52 pages/cpu s176128 r8192 d28672 u524288
[ 0.259183] pcpu-alloc: s176128 r8192 d28672 u524288 alloc=1*2097152
[ 0.259185] pcpu-alloc: [0] 0 1 2 3
[ 0.259257] Built 1 zonelists, mobility grouping on. Total pages: 488563
[ 0.259260] Policy zone: DMA32
[ 0.259264] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.3.16-300.fc31.x86_64 root=/dev/mapper/fedora_localhost–live-root ro resume=/dev/mapper/fedora_localhost–live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet
[ 0.260108] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.260486] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.260556] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.275918] Memory: 1848108K/1985572K available (12291K kernel code, 1541K rwdata, 4568K rodata, 2276K init, 4464K bss, 137464K reserved, 0K cma-reserved)
[ 0.276291] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.276319] Kernel/User page tables isolation: enabled
[ 0.276352] ftrace: allocating 40090 entries in 157 pages
[ 0.297773] rcu: Hierarchical RCU implementation.
[ 0.297777] rcu: RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[ 0.297778] Tasks RCU enabled.
[ 0.297780] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.297781] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.304802] NR_IRQS: 65792, nr_irqs: 1024, preallocated irqs: 16
[ 0.306605] random: crng done (trusting CPU’s manufacturer)
[ 0.306662] Console: colour dummy device 80x25
[ 0.306669] printk: console [tty0] enabled
[ 0.306708] ACPI: Core revision 20190703
[ 0.306984] APIC: Switch to symmetric I/O mode setup
[ 0.307800] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns
[ 0.307808] Calibrating delay loop (skipped), value calculated using timer frequency… 4331.60 BogoMIPS (lpj=2165800)
[ 0.307812] pid_max: default: 32768 minimum: 301
[ 0.308803] LSM: Security Framework initializing
[ 0.308803] Yama: becoming mindful.
[ 0.308803] SELinux: Initializing.
[ 0.308803] *** VALIDATE SELinux ***
[ 0.308803] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.308803] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.308803] *** VALIDATE proc ***
[ 0.308803] *** VALIDATE cgroup1 ***
[ 0.308803] *** VALIDATE cgroup2 ***
[ 0.308803] process: using mwait in idle threads
[ 0.308803] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.308803] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.308803] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.308803] Spectre V2 : Mitigation: Full generic retpoline
[ 0.308803] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.308803] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.308803] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.308803] MDS: Mitigation: Clear CPU buffers
[ 0.308803] Freeing SMP alternatives memory: 36K
[ 0.308803] TSC deadline timer enabled
[ 0.308803] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)
[ 0.308803] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.308803] … version: 3
[ 0.308803] … bit width: 40
[ 0.308803] … generic registers: 2
[ 0.308803] … value mask: 000000ffffffffff
[ 0.308803] … max period: 0000007fffffffff
[ 0.308803] … fixed-purpose events: 3
[ 0.308803] … event mask: 0000000700000003
[ 0.308803] rcu: Hierarchical SRCU implementation.
[ 0.309421] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.309612] smp: Bringing up secondary CPUs …
[ 0.309898] x86: Booting SMP configuration:
[ 0.309901] … node #0, CPUs: #1
[ 0.310166] smp: Brought up 1 node, 2 CPUs
[ 0.310166] smpboot: Max logical packages: 2
[ 0.310166] smpboot: Total of 2 processors activated (8663.20 BogoMIPS)
[ 0.310942] devtmpfs: initialized
[ 0.310942] x86/mm: Memory block size: 128MB
[ 0.311858] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[ 0.311861] PM: Registering ACPI NVS region [mem 0x791ca000-0x792c9fff] (1048576 bytes)
[ 0.312003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.312003] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.312003] pinctrl core: initialized pinctrl subsystem
[ 0.312109] PM: RTC time: 00:00:22, date: 2014-01-01
[ 0.312376] NET: Registered protocol family 16
[ 0.312602] audit: initializing netlink subsys (disabled)
[ 0.312846] audit: type=2000 audit(1388534422.005:1): state=initialized audit_enabled=0 res=1
[ 0.313039] cpuidle: using governor menu
[ 0.313170] ACPI: bus type PCI registered
[ 0.313173] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.313308] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.313331] PCI: not using MMCONFIG
[ 0.313333] PCI: Using configuration type 1 for base access
[ 0.313828] ENERGY_PERF_BIAS: Set to ‘normal’, was ‘performance’
[ 0.317180] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.676257] cryptd: max_cpu_qlen set to 1000
[ 0.679043] alg: No test for lzo-rle (lzo-rle-generic)
[ 0.679043] alg: No test for lzo-rle (lzo-rle-scomp)
[ 0.679852] alg: No test for 842 (842-generic)
[ 0.679852] alg: No test for 842 (842-scomp)
[ 0.687943] ACPI: Added OSI(Module Device)
[ 0.687945] ACPI: Added OSI(Processor Device)
[ 0.687947] ACPI: Added OSI(3.0 SCP Extensions)
[ 0.687948] ACPI: Added OSI(Processor Aggregator Device)
[ 0.687951] ACPI: Added OSI(Linux-Dell-Video)
[ 0.687952] ACPI: Added OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.687954] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
[ 0.706088] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.710190] ACPI: Dynamic OEM Table Load:
[ 0.710194] ACPI: SSDT 0xFFFF9279F6707800 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.711388] ACPI: Dynamic OEM Table Load:
[ 0.711397] ACPI: SSDT 0xFFFF9279F6705000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.713164] ACPI: Dynamic OEM Table Load:
[ 0.713173] ACPI: SSDT 0xFFFF9279F67AA200 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.714453] ACPI: Dynamic OEM Table Load:
[ 0.714461] ACPI: SSDT 0xFFFF9279F66E4F00 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.716361] ACPI: EC: EC started
[ 0.716364] ACPI: EC: interrupt blocked
[ 6.867895] ACPI: _SB.PCI0.LPCB.EC0: Used as first EC
[ 6.867899] ACPI: _SB.PCI0.LPCB.EC0: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 6.867902] ACPI: _SB.PCI0.LPCB.EC0: Boot DSDT EC used to handle transactions
[ 6.867903] ACPI: Interpreter enabled
[ 6.867944] ACPI: (supports S0 S3 S4 S5)
[ 6.867947] ACPI: Using IOAPIC for interrupt routing
[ 6.868021] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 6.868934] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 6.868957] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 6.869711] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 6.874427] ACPI: Power Resource [USBC] (on)
[ 6.878946] ACPI: Power Resource [PLPE] (on)
[ 6.879358] ACPI: Power Resource [PLPE] (on)
[ 6.884761] ACPI: Power Resource [CLK0] (on)
[ 6.884842] ACPI: Power Resource [CLK1] (on)
[ 6.957878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 6.957889] acpi PNP0A08:00: OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 6.957973] acpi PNP0A08:00: OSC failed (AE_ERROR); disabling ASPM
[ 6.957994] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 6.958574] PCI host bridge to bus 0000:00
[ 6.958579] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 6.958582] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 6.958585] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 6.958587] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 6.958590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 6.958593] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 6.958595] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 6.958598] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[ 6.958601] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[ 6.958604] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.958620] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 6.958794] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 6.958810] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 6.958821] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 6.958831] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
[ 6.958850] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 6.959007] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 6.959028] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 6.959087] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 6.959235] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 6.959266] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 6.959279] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 6.959385] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 6.959529] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 6.959554] pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit]
[ 6.959625] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 6.959763] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 6.959841] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 6.959985] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 6.960060] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 6.960210] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 6.960284] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 6.960436] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 6.960643] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 6.960686] pci 0000:00:1f.3: reg 0x10: [mem 0x90814000-0x9081401f]
[ 6.960755] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
[ 6.961039] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 6.961125] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 6.961177] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 6.961225] pci 0000:02:00.0: reg 0x18: [mem 0x90500000-0x90503fff 64bit]
[ 6.961417] pci 0000:02:00.0: supports D1 D2
[ 6.961419] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 6.961629] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 6.961634] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 6.961638] pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff]
[ 6.961759] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[ 6.961793] pci 0000:03:00.0: reg 0x10: [mem 0x9040f000-0x9040ffff]
[ 6.961985] pci 0000:03:00.0: supports D1 D2
[ 6.961988] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 6.962175] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 6.962181] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
[ 6.963308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.963437] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.963562] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.963687] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.963816] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.963943] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.964071] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.964201] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 6.967806] ACPI: EC: interrupt unblocked
[ 6.967806] ACPI: EC: event unblocked
[ 6.967806] ACPI: _SB.PCI0.LPCB.EC0: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 6.967806] ACPI: _SB.PCI0.LPCB.EC0: Boot DSDT EC used to handle transactions and events
[ 6.967982] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 6.967982] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 6.967982] pci 0000:00:02.0: vgaarb: bridge control possible
[ 6.967982] vgaarb: loaded
[ 6.968035] SCSI subsystem initialized
[ 6.968135] libata version 3.00 loaded.
[ 6.968180] ACPI: bus type USB registered
[ 6.968222] usbcore: registered new interface driver usbfs
[ 6.968239] usbcore: registered new interface driver hub
[ 6.968811] usbcore: registered new device driver usb
[ 6.968811] pps_core: LinuxPPS API ver. 1 registered
[ 6.968811] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 6.968811] PTP clock support registered
[ 6.968820] EDAC MC: Ver: 3.0.0
[ 6.968820] Registered efivars operations
[ 6.968844] PCI: Using ACPI for IRQ routing
[ 6.970312] PCI: pci_cache_line_size set to 64 bytes
[ 6.970386] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 6.970388] e820: reserve RAM buffer [mem 0x00085000-0x0008ffff]
[ 6.970390] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 6.970392] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 6.970393] e820: reserve RAM buffer [mem 0x7588f000-0x77ffffff]
[ 6.970395] e820: reserve RAM buffer [mem 0x788ba000-0x7bffffff]
[ 6.970397] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 6.970805] NetLabel: Initializing
[ 6.970805] NetLabel: domain hash size = 128
[ 6.970805] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 6.970805] NetLabel: unlabeled traffic allowed by default
[ 6.971046] clocksource: Switched to clocksource tsc-early
dmesg 2:
[ 7.002419] VFS: Disk quotas dquot_6.6.0
[ 7.002449] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 7.002496] *** VALIDATE hugetlbfs ***
[ 7.002560] pnp: PnP ACPI init
[ 7.002671] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 7.003265] system 00:01: [io 0x0680-0x069f] has been reserved
[ 7.003269] system 00:01: [io 0x0400-0x047f] has been reserved
[ 7.003272] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 7.003274] system 00:01: [io 0x0600-0x061f] has been reserved
[ 7.003280] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 7.003290] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 7.003385] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 7.003590] pnp 00:03: Plug and Play ACPI device, IDs SYN1ee1 SYN1e00 SYN0002 PNP0f13 (active)
[ 7.004208] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[ 7.004212] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[ 7.004215] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[ 7.004218] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
[ 7.004221] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 7.004224] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[ 7.004227] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 7.004230] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[ 7.004233] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved
[ 7.004242] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 7.006234] pnp: PnP ACPI: found 5 devices
[ 7.010213] thermal_sys: Registered thermal governor ‘fair_share’
[ 7.010215] thermal_sys: Registered thermal governor ‘bang_bang’
[ 7.010217] thermal_sys: Registered thermal governor ‘step_wise’
[ 7.010219] thermal_sys: Registered thermal governor ‘user_space’
[ 7.014759] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 7.014909] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 7.014914] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 7.014918] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 7.014936] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90c00000-0x90dfffff]
[ 7.014945] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90e00000-0x90ffffff 64bit pref]
[ 7.014950] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 7.014956] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 7.014960] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 7.014965] pci 0000:00:1c.0: bridge window [mem 0x90c00000-0x90dfffff]
[ 7.014969] pci 0000:00:1c.0: bridge window [mem 0x90e00000-0x90ffffff 64bit pref]
[ 7.014975] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 7.014978] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 7.014983] pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff]
[ 7.014990] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 7.014994] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
[ 7.015002] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 7.015005] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 7.015007] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 7.015010] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 7.015012] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 7.015015] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 7.015017] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 7.015020] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[ 7.015022] pci_bus 0000:00: resource 12 [mem 0x80000000-0x908ffffe window]
[ 7.015025] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 7.015027] pci_bus 0000:01: resource 1 [mem 0x90c00000-0x90dfffff]
[ 7.015030] pci_bus 0000:01: resource 2 [mem 0x90e00000-0x90ffffff 64bit pref]
[ 7.015033] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 7.015035] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
[ 7.015038] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
[ 7.015201] NET: Registered protocol family 2
[ 7.015523] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 7.015537] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 7.015585] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 7.015659] TCP: Hash tables configured (established 16384 bind 16384)
[ 7.015730] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 7.015748] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 7.015888] NET: Registered protocol family 1
[ 7.015899] NET: Registered protocol family 44
[ 7.015920] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 7.016317] PCI: CLS 64 bytes, default 64
[ 7.016421] Trying to unpack rootfs image as initramfs…
[ 7.817374] Freeing initrd memory: 30304K
[ 7.817497] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns
[ 7.817538] clocksource: Switched to clocksource tsc
[ 7.822728] Initialise system trusted keyrings
[ 7.822749] Key type blacklist registered
[ 7.822866] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[ 7.826246] zbud: loaded
[ 7.827520] Platform Keyring initialized
[ 7.836661] NET: Registered protocol family 38
[ 7.836667] Key type asymmetric registered
[ 7.836669] Asymmetric key parser ‘x509’ registered
[ 7.836698] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 7.836819] io scheduler mq-deadline registered
[ 7.836821] io scheduler kyber registered
[ 7.836917] io scheduler bfq registered
[ 7.837016] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 7.838002] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.838050] efifb: probing for efifb
[ 7.838076] efifb: showing boot graphics
[ 7.839885] efifb: framebuffer at 0x80000000, using 4128k, total 4128k
[ 7.839887] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 7.839888] efifb: scrolling: redraw
[ 7.839890] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 7.840000] fbcon: Deferring console take-over
[ 7.840002] fb0: EFI VGA frame buffer device
[ 7.840019] intel_idle: MWAIT substates: 0x33000020
[ 7.840021] intel_idle: v0.4.1 model 0x37
[ 7.840216] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 7.841604] ACPI: AC Adapter [ACAD] (on-line)
[ 7.841720] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 7.841732] ACPI: Lid Switch [LID0]
[ 7.841798] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 7.841823] ACPI: Power Button [PWRB]
[ 7.841915] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.841941] ACPI: Power Button [PWRF]
[ 7.862469] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.862472] ACPI: Thermal Zone [TZ01] (25 C)
[ 7.863024] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 7.883432] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 7.888942] hpet: number irqs doesn’t agree with number of timers
[ 7.889051] Non-volatile memory driver v1.3
[ 7.889113] Linux agpgart interface v0.103
[ 7.889791] libphy: Fixed MDIO Bus: probed
[ 7.890043] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 7.890050] ehci-pci: EHCI PCI platform driver
[ 7.890076] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 7.890082] ohci-pci: OHCI PCI platform driver
[ 7.890097] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.890360] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 7.890439] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 7.891518] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 7.891524] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 7.891788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 7.891791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.891794] usb usb1: Product: xHCI Host Controller
[ 7.891796] usb usb1: Manufacturer: Linux 5.3.16-300.fc31.x86_64 xhci-hcd
[ 7.891798] usb usb1: SerialNumber: 0000:00:14.0
[ 7.892105] hub 1-0:1.0: USB hub found
[ 7.892124] hub 1-0:1.0: 6 ports detected
[ 7.892857] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 7.893001] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 7.893008] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 7.893092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 7.893095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.893097] usb usb2: Product: xHCI Host Controller
[ 7.893100] usb usb2: Manufacturer: Linux 5.3.16-300.fc31.x86_64 xhci-hcd
[ 7.893102] usb usb2: SerialNumber: 0000:00:14.0
[ 7.893356] hub 2-0:1.0: USB hub found
[ 7.893371] hub 2-0:1.0: 1 port detected
[ 7.893642] usbcore: registered new interface driver usbserial_generic
[ 7.893653] usbserial: USB Serial support registered for generic
[ 7.893712] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 7.900557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.900566] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.900930] mousedev: PS/2 mouse device common for all mice
[ 7.901984] rtc_cmos 00:00: RTC can wake from S4
[ 7.902253] rtc_cmos 00:00: registered as rtc0
[ 7.902257] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 7.902359] device-mapper: uevent: version 1.0.3
[ 7.902538] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 7.902767] intel_pstate: Intel P-state driver initializing
[ 7.904616] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.904976] usbcore: registered new interface driver usbhid
[ 7.904982] usbhid: USB HID core driver
[ 7.905918] drop_monitor: Initializing network drop monitor service
[ 7.906274] Initializing XFRM netlink socket
[ 7.907349] NET: Registered protocol family 10
[ 7.928295] Segment Routing with IPv6
[ 7.928341] mip6: Mobile IPv6
[ 7.928345] NET: Registered protocol family 17
[ 7.928860] RAS: Correctable Errors collector initialized.
[ 7.928935] microcode: sig=0x30678, pf=0x8, revision=0x838
[ 7.928950] microcode: Microcode Update Driver: v2.2.
[ 7.928979] sched_clock: Marking stable (7927493657, 1317011)->(7953677934, -24867266)
[ 7.929310] registered taskstats version 1
[ 7.929329] Loading compiled-in X.509 certificates
[ 7.970563] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 7.982401] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 8.008707] Loaded X.509 cert ‘Fedora kernel signing key: 482bb098c114c78c3638fd7a8c3ed0b6d28bcf94’
[ 8.008763] zswap: loaded using pool lzo/zbud
[ 8.033413] Key type big_key registered
[ 8.044427] Key type encrypted registered
[ 8.045907] integrity: Loading X.509 certificate: UEFI:db
[ 8.045984] integrity: Loaded X.509 cert ‘Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53’
[ 8.045986] integrity: Loading X.509 certificate: UEFI:db
[ 8.046029] integrity: Loaded X.509 cert ‘Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4’
[ 8.046031] integrity: Loading X.509 certificate: UEFI:db
[ 8.046068] integrity: Loaded X.509 cert ‘Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec’
[ 8.047798] ima: No TPM chip found, activating TPM-bypass!
[ 8.047827] ima: Allocated hash algorithm: sha256
[ 8.047841] No architecture policies found
[ 8.048522] PM: Magic number: 14:0:0
[ 8.048679] rtc_cmos 00:00: setting system clock to 2014-01-01T00:00:29 UTC (1388534429)
[ 8.048764] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7
[ 8.057612] Freeing unused decrypted memory: 2040K
[ 8.058840] Freeing unused kernel image memory: 2276K
[ 8.064217] Write protecting the kernel read-only data: 20480k
[ 8.065642] Freeing unused kernel image memory: 2016K
[ 8.066727] Freeing unused kernel image memory: 1576K
[ 8.090863] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.090872] rodata_test: all tests were successful
[ 8.090949] x86/mm: Checking user space page tables
[ 8.112267] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.112271] Run /init as init process
[ 8.124159] systemd[1]: System time before build time, advancing clock.
[ 8.185413] systemd[1]: systemd v243.5-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 8.198294] systemd[1]: Detected architecture x86-64.
[ 8.198325] systemd[1]: Running in initial RAM disk.
[ 8.198537] systemd[1]: Set hostname to <localhost.localdomain>.
[ 8.201119] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[ 8.210109] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7
[ 8.213835] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 8.385315] systemd[1]: system-systemd\x2dhibernate\x2dresume.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 8.385323] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 8.386950] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[ 8.387214] systemd[1]: Reached target Slices.
[ 8.387252] systemd[1]: Reached target Swap.
[ 8.387281] systemd[1]: Reached target Timers.
[ 8.395479] usb 1-1: New USB device found, idVendor=05c8, idProduct=036e, bcdDevice= 1.06
[ 8.395482] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.395484] usb 1-1: Product: HP Truevision HD
[ 8.395486] usb 1-1: Manufacturer: SunplusIT INC.
[ 8.455974] fuse: init (API version 7.31)
[ 8.579826] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 8.707282] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37
[ 8.707285] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.707288] usb 1-4: Product: USB2.0 Hub
[ 8.708045] hub 1-4:1.0: USB hub found
[ 8.708291] hub 1-4:1.0: 4 ports detected
[ 8.708726] usb: port power management may be unreliable
[ 8.846479] psmouse serio1: synaptics: queried max coordinates: x […5690], y […4706]
[ 8.887431] psmouse serio1: synaptics: queried min coordinates: x [1300…], y [1234…]
[ 8.887443] psmouse serio1: synaptics: Your touchpad (PNP: SYN1ee1 SYN1e00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 8.966621] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3003, fw id: 1738305
[ 8.980821] usb 1-4.3: new full-speed USB device number 4 using xhci_hcd
[ 9.017135] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 9.059111] usb 1-4.3: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[ 9.059115] usb 1-4.3: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[ 9.059655] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=b001, bcdDevice= 2.00
[ 9.059658] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.059661] usb 1-4.3: Product: Bluetooth Radio
[ 9.059663] usb 1-4.3: Manufacturer: Realtek
[ 9.059664] usb 1-4.3: SerialNumber: 00e04c000001
[ 9.177473] audit: type=1130 audit(1576410001.051:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-journald comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 9.528826] audit: type=1130 audit(1576410001.400:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-udevd comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 9.769282] audit: type=1130 audit(1576410001.641:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-udev-trigger comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 9.800198] audit: type=1130 audit(1576410001.672:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=plymouth-start comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 9.879191] sdhci: Secure Digital Host Controller Interface driver
[ 9.879194] sdhci: Copyright(c) Pierre Ossman
[ 9.891688] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 9.899986] mmc0: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 10.007299] mmc0: new HS200 MMC card at address 0001
[ 10.098664] mmcblk0: mmc0:0001 MBG4GC 29.1 GiB
[ 10.099484] mmcblk0boot0: mmc0:0001 MBG4GC partition 1 4.00 MiB
[ 10.100144] mmcblk0boot1: mmc0:0001 MBG4GC partition 2 4.00 MiB
[ 10.101146] mmcblk0rpmb: mmc0:0001 MBG4GC partition 3 4.00 MiB, chardev (241:0)
[ 10.122497] mmcblk0: p1 p2 p3
[ 10.416579] checking generic (80000000 408000) vs hw (80000000 10000000)
[ 10.416583] fb0: switching to inteldrmfb from EFI VGA
[ 10.417658] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 10.417786] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.417788] [drm] Driver supports precise vblank timestamp query.
[ 10.419572] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.442474] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 10.444046] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.444504] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 10.541267] fbcon: i915drmfb (fb0) is primary device
[ 10.541269] fbcon: Deferring console take-over
[ 10.541274] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 11.132356] audit: type=1130 audit(1576410003.004:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-hibernate-resume@dev-mapper-fedora_localhost\x2d\x2dlive\x2dswap comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.132364] audit: type=1131 audit(1576410003.004:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-hibernate-resume@dev-mapper-fedora_localhost\x2d\x2dlive\x2dswap comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.157779] audit: type=1130 audit(1576410003.031:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-tmpfiles-setup comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.195064] audit: type=1130 audit(1576410003.069:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=dracut-initqueue comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 15.971742] audit: type=1130 audit(1576410007.845:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-fsck-root comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 15.990282] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 16.381343] audit: type=1130 audit(1576410008.255:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=initrd-parse-etc comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.381481] audit: type=1131 audit(1576410008.255:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=initrd-parse-etc comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.508701] audit: type=1130 audit(1576410008.382:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=dracut-pre-pivot comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.541001] audit: type=1131 audit(1576410008.415:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=dracut-pre-pivot comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.546206] audit: type=1131 audit(1576410008.420:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=dracut-initqueue comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.551145] audit: type=1131 audit(1576410008.425:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-sysctl comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.553076] audit: type=1131 audit(1576410008.427:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-modules-load comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.554840] audit: type=1131 audit(1576410008.428:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-tmpfiles-setup comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.557257] audit: type=1131 audit(1576410008.431:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg=‘unit=systemd-udev-trigger comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.870182] systemd-journald[209]: Received SIGTERM from PID 1 (systemd).
[ 16.942470] printk: systemd: 25 output lines suppressed due to ratelimiting
[ 17.730890] SELinux: policy capability network_peer_controls=1
[ 17.730892] SELinux: policy capability open_perms=1
[ 17.730893] SELinux: policy capability extended_socket_class=1
[ 17.730894] SELinux: policy capability always_check_network=0
[ 17.730895] SELinux: policy capability cgroup_seclabel=1
[ 17.730896] SELinux: policy capability nnp_nosuid_transition=1
[ 17.784887] systemd[1]: Successfully loaded SELinux policy in 634.114ms.
[ 17.979290] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 114.711ms.
dmesg 3:
[ 18.002659] systemd[1]: systemd v243.5-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 18.015293] systemd[1]: Detected architecture x86-64.
[ 18.018903] systemd[1]: Set hostname to <localhost.localdomain>.
[ 18.429005] systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
[ 18.432468] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly.
[ 18.433184] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly.
[ 18.437530] systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly.
[ 18.438633] systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly.
[ 18.439617] systemd[1]: /usr/lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly.
[ 18.440387] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly.
[ 18.728852] Adding 3055612k swap on /dev/mapper/fedora_localhost–live-swap. Priority:-2 extents:1 across:3055612k SSFS
[ 18.825855] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 19.718366] systemd-journald[538]: Received client request to flush runtime journal.
[ 19.725581] systemd-journald[538]: File /var/log/journal/513be241f24345318068a3a08594d85b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 20.566098] input: HP Wireless hotkeys as /devices/virtual/input/input7
[ 20.576908] int3401 thermal INT3401:00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[ 20.829931] Bluetooth: Core ver 2.22
[ 20.830070] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 20.830133] NET: Registered protocol family 31
[ 20.830135] Bluetooth: HCI device and connection manager initialized
[ 20.830140] Bluetooth: HCI socket layer initialized
[ 20.830143] Bluetooth: L2CAP socket layer initialized
[ 20.830153] Bluetooth: SCO socket layer initialized
[ 21.025720] Bluetooth: HCI UART driver ver 2.3
[ 21.025723] Bluetooth: HCI UART protocol H4 registered
[ 21.025724] Bluetooth: HCI UART protocol BCSP registered
[ 21.025746] Bluetooth: HCI UART protocol LL registered
[ 21.025748] Bluetooth: HCI UART protocol ATH3K registered
[ 21.025762] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 21.037879] Bluetooth: HCI UART protocol Intel registered
[ 21.037983] Bluetooth: HCI UART protocol Broadcom registered
[ 21.037999] Bluetooth: HCI UART protocol QCA registered
[ 21.038000] Bluetooth: HCI UART protocol AG6XX registered
[ 21.038015] Bluetooth: HCI UART protocol Marvell registered
[ 21.203195] kauditd_printk_skb: 36 callbacks suppressed
[ 21.203198] audit: type=1130 audit(1576410013.076:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=lvm2-monitor comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 21.203467] audit: type=1130 audit(1576410013.077:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=lvm2-pvscan@179:3 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 21.232223] usbcore: registered new interface driver btusb
[ 21.238469] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 21.239464] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 21.239467] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 21.243961] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin
[ 21.244026] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 21.244036] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 21.296643] mc: Linux media interface: v0.10
[ 21.432732] videodev: Linux video capture interface: v2.00
[ 21.474278] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 21.475540] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 21.660660] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:036e)
[ 21.683265] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 21.691931] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized!
[ 21.691936] uvcvideo 1-1:1.0: Entity type for entity Extension 3 was not initialized!
[ 21.691938] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized!
[ 21.691941] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
[ 21.692109] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input9
[ 21.692340] usbcore: registered new interface driver uvcvideo
[ 21.692342] USB Video Class driver (1.1.1)
[ 21.698319] hp_wmi: query 0xd returned error 0x5
[ 21.698416] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 21.777305] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.777309] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.777311] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 21.777313] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 21.777315] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 21.777318] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 21.777320] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 21.879909] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.880029] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.880132] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 21.914442] intel_rapl_common: Found RAPL domain package
[ 21.914446] intel_rapl_common: Found RAPL domain core
[ 21.980220] iTCO_vendor_support: vendor-support=0
[ 21.989370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 21.989468] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 21.991385] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.092690] audit: type=1130 audit(1576410013.966:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=systemd-rfkill comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 22.321531] kvm: disabled by bios
[ 22.339542] kvm: disabled by bios
[ 22.415909] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 22.419310] ieee80211 phy0: Selected rate control algorithm ‘rtl_rc’
[ 22.421293] rtlwifi: rtlwifi: wireless switch is on
[ 22.459362] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0
[ 22.632421] audit: type=1130 audit(1576410014.506:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=systemd-udev-settle comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 22.719223] audit: type=1130 audit(1576410014.593:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=dmraid-activation comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 22.719335] audit: type=1131 audit(1576410014.593:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=dmraid-activation comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 22.854842] audit: type=1130 audit(1576410014.728:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=systemd-fsck@dev-disk-by\x2duuid-4610\x2d29F9 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 22.892385] audit: type=1130 audit(1576410014.766:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=systemd-fsck@dev-disk-by\x2duuid-1c96410b\x2dcc54\x2d4031\x2da35e\x2de536c0e19c94 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 22.919283] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 22.985892] audit: type=1130 audit(1576410014.858:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=dracut-shutdown comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 23.015298] audit: type=1130 audit(1576410014.889:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=plymouth-read-write comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 23.385423] RPC: Registered named UNIX socket transport module.
[ 23.385425] RPC: Registered udp transport module.
[ 23.385426] RPC: Registered tcp transport module.
[ 23.385427] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.354052] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.354054] Bluetooth: BNEP filters: protocol multicast
[ 24.354061] Bluetooth: BNEP socket layer initialized
[ 30.384734] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 30.422802] tun: Universal TUN/TAP device driver, 1.6
[ 30.425996] virbr0: port 1(virbr0-nic) entered blocking state
[ 30.426000] virbr0: port 1(virbr0-nic) entered disabled state
[ 30.426168] device virbr0-nic entered promiscuous mode
[ 31.955423] virbr0: port 1(virbr0-nic) entered blocking state
[ 31.955428] virbr0: port 1(virbr0-nic) entered listening state
[ 32.259791] virbr0: port 1(virbr0-nic) entered disabled state
[ 41.490620] rfkill: input handler disabled
[ 169.326860] systemd-journald[538]: File /var/log/journal/513be241f24345318068a3a08594d85b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 169.742110] rfkill: input handler enabled
[ 171.952324] Bluetooth: RFCOMM TTY layer initialized
[ 171.952334] Bluetooth: RFCOMM socket layer initialized
[ 171.952483] Bluetooth: RFCOMM ver 1.11
[ 179.969253] rfkill: input handler disabled
[ 356.935637] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 357.069568] usb 1-2: New USB device found, idVendor=05e3, idProduct=0751, bcdDevice=14.04
[ 357.069584] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 357.069595] usb 1-2: Product: USB Storage
[ 357.069604] usb 1-2: Manufacturer: USB Storage
[ 357.223546] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 357.225977] scsi host0: usb-storage 1-2:1.0
[ 357.226217] usbcore: registered new interface driver usb-storage
[ 357.233981] usbcore: registered new interface driver uas
[ 358.235159] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 1404 PQ: 0 ANSI: 6
[ 358.238326] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 358.448732] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 383.000908] usb 1-2: USB disconnect, device number 5
[ 389.862663] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[ 389.996773] usb 1-2: New USB device found, idVendor=05e3, idProduct=0751, bcdDevice=14.04
[ 389.996789] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 389.996799] usb 1-2: Product: USB Storage
[ 389.996808] usb 1-2: Manufacturer: USB Storage
[ 390.004982] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 390.007097] scsi host0: usb-storage 1-2:1.0
[ 391.015824] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 1404 PQ: 0 ANSI: 6
[ 391.017879] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 391.229966] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 396.420463] usb 1-2: USB disconnect, device number 6
[ 1769.726600] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.LPCB.EC0._Q33.PMIN], AE_NOT_FOUND (20190703/psargs-330)
[ 1769.726646] ACPI Error: Aborting method _SB.PCI0.LPCB.EC0._Q33 due to previous error (AE_NOT_FOUND) (20190703/psparse-529)
[ 3435.821102] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3435.821119] atkbd serio0: Use ‘setkeycodes e058 ’ to make it known.
[ 3435.828486] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3435.828499] atkbd serio0: Use ‘setkeycodes e058 ’ to make it known.
[ 3438.028358] PM: suspend entry (deep)
[ 3438.113520] Filesystems sync: 0.085 seconds
[ 3438.122445] Freezing user space processes … (elapsed 0.005 seconds) done.
[ 3438.127869] OOM killer disabled.
[ 3438.127871] Freezing remaining freezable tasks … (elapsed 0.001 seconds) done.
[ 3438.129362] printk: Suspending console(s) (use no_console_suspend to debug)
[ 3439.054770] PM: suspend devices took 0.925 seconds
[ 3439.071383] ACPI: EC: interrupt blocked
[ 3439.095120] ACPI: Preparing to enter system sleep state S3
[ 3439.105380] ACPI: EC: event blocked
[ 3439.105384] ACPI: EC: EC stopped
[ 3439.105387] PM: Saving platform NVS memory
[ 3439.105410] Disabling non-boot CPUs …
[ 3439.108309] smpboot: CPU 1 is now offline
[ 3439.120231] ACPI: Low-level resume complete
[ 3439.120306] ACPI: EC: EC started
[ 3439.120307] PM: Restoring platform NVS memory
[ 3439.122416] Enabling non-boot CPUs …
[ 3439.122493] x86: Booting SMP configuration:
[ 3439.122494] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3439.124021] CPU1 is up
[ 3439.124155] ACPI: Waking up from system sleep state S3
[ 3439.147678] acpi LNXPOWER:03: Turning ON
[ 3439.180904] acpi LNXPOWER:04: Turning ON
[ 3439.215132] ACPI: EC: interrupt unblocked
[ 3439.254032] rtlwifi: rtlwifi: wireless switch is on
[ 3439.259363] ACPI: EC: event unblocked
[ 3439.539059] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
[ 3439.738292] usb 1-4.3: reset full-speed USB device number 4 using xhci_hcd
[ 3439.881844] PM: resume devices took 0.629 seconds
[ 3439.883885] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 3439.884787] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 3439.884790] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 3439.884820] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin
[ 3439.884896] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 3439.884909] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 3439.889428] acpi LNXPOWER:02: Turning OFF
[ 3439.889521] acpi LNXPOWER:01: Turning OFF
[ 3439.889580] acpi LNXPOWER:00: Turning OFF
[ 3439.889610] OOM killer enabled.
[ 3439.889611] Restarting tasks … done.
[ 3439.970657] PM: suspend exit
[ 3440.714967] psmouse serio1: synaptics: queried max coordinates: x […5690], y […4706]
[ 3440.754707] psmouse serio1: synaptics: queried min coordinates: x [1300…], y [1234…]
[ 3456.371673] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3456.371679] atkbd serio0: Use ‘setkeycodes e058 ’ to make it known.
[ 3456.379523] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3456.379531] atkbd serio0: Use ‘setkeycodes e058 ’ to make it known.
[ 3468.173997] PM: suspend entry (deep)
[ 3468.272629] Filesystems sync: 0.098 seconds
[ 3468.274252] Freezing user space processes … (elapsed 0.197 seconds) done.
[ 3468.471608] OOM killer disabled.
[ 3468.471613] Freezing remaining freezable tasks … (elapsed 0.001 seconds) done.
[ 3468.473595] printk: Suspending console(s) (use no_console_suspend to debug)
[ 3469.313727] PM: suspend devices took 0.839 seconds
[ 3469.329386] ACPI: EC: interrupt blocked
[ 3469.352915] ACPI: Preparing to enter system sleep state S3
[ 3469.362381] ACPI: EC: event blocked
[ 3469.362384] ACPI: EC: EC stopped
[ 3469.362386] PM: Saving platform NVS memory
[ 3469.362407] Disabling non-boot CPUs …
[ 3469.365120] smpboot: CPU 1 is now offline
[ 3469.371026] ACPI: Low-level resume complete
[ 3469.371101] ACPI: EC: EC started
[ 3469.371102] PM: Restoring platform NVS memory
[ 3469.373152] Enabling non-boot CPUs …
[ 3469.373228] x86: Booting SMP configuration:
[ 3469.373230] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3469.375349] CPU1 is up
[ 3469.375683] ACPI: Waking up from system sleep state S3
[ 3469.401479] ACPI: EC: interrupt unblocked
[ 3469.439140] rtlwifi: rtlwifi: wireless switch is on
[ 3469.456774] ACPI: EC: event unblocked
[ 3469.719887] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
[ 3469.919113] usb 1-4.3: reset full-speed USB device number 4 using xhci_hcd
[ 3470.069835] PM: resume devices took 0.631 seconds
[ 3470.070637] acpi LNXPOWER:02: Turning OFF
[ 3470.070720] acpi LNXPOWER:01: Turning OFF
[ 3470.070795] acpi LNXPOWER:00: Turning OFF
[ 3470.070823] OOM killer enabled.
[ 3470.070825] Restarting tasks …
[ 3470.074332] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 3470.076050] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 3470.076055] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 3470.076211] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin
[ 3470.076265] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 3470.076281] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 3470.079753] done.
[ 3470.249249] PM: suspend exit
[ 3470.897932] psmouse serio1: synaptics: queried max coordinates: x […5690], y […4706]
[ 3470.937695] psmouse serio1: synaptics: queried min coordinates: x [1300…], y [1234…]
[ 3509.899415] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3509.899427] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.151240] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.151246] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.181097] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.181100] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.211146] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.211150] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.240997] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.241000] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.271061] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.271064] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.300921] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.300925] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.330976] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.330980] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.360856] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.360860] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.388904] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.388908] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.420789] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.420792] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.450854] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.450858] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.480717] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.480721] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.510775] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.510779] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.540644] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.540648] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.570705] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.570708] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.600580] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.600584] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.630643] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.630647] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.660503] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.660507] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.690565] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.690569] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.720428] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.720432] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.750482] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.750485] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.780354] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.780358] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.810424] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.810427] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.840294] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.840298] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.870344] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.870348] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.900214] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.900218] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.927253] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 3510.927256] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
[ 3510.934952] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 3510.934956] atkbd serio0: Use ‘setkeycodes e02b ’ to make it known.
lspci -vvv:
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e) (prog-if 00 [VGA controller])
DeviceName: Intel(R) HD Graphics
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 92
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2050 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities:
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 90
Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
Kernel driver in use: xhci_hcd
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 93
Region 0: Memory at 90700000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 90600000 (32-bit, non-prefetchable) [size=1M]
Capabilities:
Kernel driver in use: mei_txe
Kernel modules: mei_txe
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 94
Region 0: Memory at 90810000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 87
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: 90c00000-90dfffff [size=2M]
Prefetchable memory behind bridge: 0000000090e00000-0000000090ffffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 88
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: 90500000-905fffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 89
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: 90400000-904fffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Capabilities:
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e)
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 90814000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at 2000 [size=32]
Capabilities:
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
Subsystem: Hewlett-Packard Company Device 2231
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at 90500000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: rtl8723be
Kernel modules: rtl8723be
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 802a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 91
Region 0: Memory at 9040f000 (32-bit, non-prefetchable) [size=4K]
Capabilities:
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
uname -a:
Linux localhost.localdomain 5.3.16-300.fc31.x86_64 #1 SMP Fri Dec 13 17:59:04 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
interrupts:
CPU0 CPU1
1: 917 0 IO-APIC 1-edge i8042
8: 0 0 IO-APIC 8-fasteoi rtc0
9: 2350 0 IO-APIC 9-fasteoi acpi
12: 52342 61312 IO-APIC 12-edge i8042
17: 778 3187 IO-APIC 17-fasteoi rtl_pci
18: 0 0 IO-APIC 18-fasteoi i801_smbus
44: 192983 26783 IO-APIC 44-fasteoi mmc0
86: 0 0 IO-APIC 86-fasteoi soc_dts
90: 1602 0 PCI-MSI 327680-edge xhci_hcd
91: 29 25 PCI-MSI 1572864-edge rtsx_pci
92: 14687 0 PCI-MSI 32768-edge i915
93: 0 17 PCI-MSI 425984-edge mei_txe
94: 0 220 PCI-MSI 442368-edge snd_hda_intel:card0
NMI: 18 21 Non-maskable interrupts
LOC: 478795 366305 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 18 21 Performance monitoring interrupts
IWI: 2813 24 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 41921 67237 Rescheduling interrupts
CAL: 11266 13737 Function call interrupts
TLB: 5906 6212 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
DFR: 0 0 Deferred Error APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 14 13 Machine check polls
HYP: 0 0 Hypervisor callback interrupts
HRE: 0 0 Hyper-V reenlightenment interrupts
HVS: 0 0 Hyper-V stimer0 interrupts
ERR: 0
MIS: 0
PIN: 0 0 Posted-interrupt notification event
NPI: 0 0 Nested posted-interrupt event
PIW: 0 0 Posted-interrupt wakeup event
Thank you in advance.
1 Like
Hi. IDK, but seems similar: the gaming mouse buttnos aren’t work. Try to blacklist psmouse driver (temporarily is better).
Thanks. I first launched “dnf update”, then I noticed that not only the right button was not working, but I couldn’t drag any more. Then I did what is described on the page you gave me the hyperlink to: I can drag again, but the touchpad right button still works as if it were the left one…
You said that sometimes the keyboard has problems, now the mouse button has problems, and that the laptop is old? and seldom used. The problem may be or likely is failing hardware or oxidizing intermittent connections on the ribbon cables that attach devices to the motherboard inside the computer. Bad connections can be easily cleaned and restored with simple service.
To test that theory you can open the settings panel and then under devices > mouse & touchpad there is an option to test the functions.
Other than service, another possible option if the hardware is failing might be to purchase a logitek mouse and keyboard with the USB unified receiver and simply replace the built-ins with add-on devices. AFAIK almost all laptops built in the last several years will flawlessly use a usb keyboard & mouse.