I installed those drivers and the monitor shows up, but I have the same problems with resolution refresh that I had here (also have dual GPU again). I followed the steps in listed in this article that worked then, but that didn’t fix it.
I also made sure secure boot is turned off.
Any idea what I’m missing?
Diagnostics:
dnf list installed '*nvidia*'
Installed Packages
akmod-nvidia.x86_64 3:535.54.03-1.fc38 @rpmfusion-nonfree-nvidia-driver
kmod-nvidia-6.3.12-200.fc38.x86_64.x86_64 3:535.54.03-1.fc38 @@commandline
nvidia-gpu-firmware.noarch 20230625-151.fc38 @updates
nvidia-persistenced.x86_64 3:535.54.03-1.fc38 @rpmfusion-nonfree-nvidia-driver
nvidia-settings.x86_64 3:535.54.03-1.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia.x86_64 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-cuda.x86_64 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-cuda-libs.i686 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-cuda-libs.x86_64 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-kmodsrc.x86_64 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-libs.i686 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-libs.x86_64 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-power.x86_64 3:535.54.03-2.fc38 @rpmfusion-nonfree-nvidia-driver
inxi -CMGxxS --edid
System:
Host: anubis Kernel: 6.3.12-200.fc38.x86_64 arch: x86_64 bits: 64
compiler: gcc v: 2.39-9.fc38
parameters: BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.3.12-200.fc38.x86_64
root=UUID=5c8dfa50-7793-4e6e-ae11-9fb1e26af859 ro rootflags=subvol=root
rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau
Desktop: GNOME v: 44.3 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 44.1
Distro: Fedora release 38 (Thirty Eight)
Machine:
Type: Laptop System: Notebook product: PE60RNE_RND_RNC v: N/A
serial: <superuser required> Chassis: No Enclosure type: 10
serial: <superuser required>
Mobo: Notebook model: PE60RNE_RND_RNC serial: <superuser required>
UEFI: INSYDE v: 1.07.05LS1 date: 04/13/2023
CPU:
Info: model: 13th Gen Intel Core i9-13900H bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xBA (186) stepping: 2
microcode: 0x4112
Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled
cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB
L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB desc: 1x24 MiB
Speed (MHz): avg: 2871 high: 3000 min/max: 400/5200:5400:4100 scaling:
driver: intel_pstate governor: powersave cores: 1: 3000 2: 3000 3: 3000
4: 3000 5: 3000 6: 3000 7: 2176 8: 3000 9: 3000 10: 3000 11: 3000 12: 3000
13: 3000 14: 1247 15: 3000 16: 3000 17: 3000 18: 3000 19: 3000 20: 3000
bogomips: 119807
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB:
conditional, RSB filling, PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: CLEVO/KAPOK
driver: i915 v: kernel arch: Gen-13 process: Intel 7 (10nm) built: 2022+
ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4 bus-ID: 0000:00:02.0
chip-ID: 8086:a7a0 class-ID: 0300
Device-2: NVIDIA AD106M [GeForce RTX 4070 Max-Q / Mobile]
vendor: CLEVO/KAPOK driver: nvidia v: 535.54.03
alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-05) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022-23+ ports: active: none off: HDMI-A-1
empty: DP-5,eDP-2 bus-ID: 0000:01:00.0 chip-ID: 10de:2860 class-ID: 0300
Device-3: Chicony USB2.0 Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-8:3 chip-ID: 04f2:b7c3
class-ID: fe01 serial: 01.00.00
Display: wayland server: X.org v: 1.20.14 with: Xwayland v: 22.1.9
compositor: gnome-shell driver: gpu: i915,nvidia,nvidia-nvswitch
display-ID: 0
Monitor-1: HDMI-A-1 model: 43S425 built: 2020 res: 3840x2160 dpi: 103
gamma: 1.2 chroma: red: x: 0.643 y: 0.333 green: x: 0.322 y: 0.624 blue:
x: 0.145 y: 0.055 white: x: 0.278 y: 0.290 size: 800x450mm (31.5x17.72")
diag: 1093mm (43") ratio: 16:9 modes: 3840x2160, 4096x2160, 1920x1080,
1680x1050, 1280x1024, 1440x900, 1280x960, 1280x800, 1152x864, 1280x720,
1024x768, 800x600, 720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 95 2: parse_edid:
unhandled CEA mode 93 3: parse_edid: unhandled CEA mode 100 4: parse_edid:
unhandled CEA mode 98
Monitor-2: eDP-1 model: BOE Display 0x0af0 built: 2021 res: 2560x1600
dpi: 189 gamma: 1.2 chroma: red: x: 0.647 y: 0.325 green: x: 0.290 y: 0.620
blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329
size: 344x215mm (13.54x8.46") diag: 406mm (16") ratio: 16:10
modes: 2560x1600
EDID-Warnings: 1: parse_edid: unknown tag 112
API: OpenGL v: 4.6 Mesa 23.1.3 renderer: Mesa Intel Graphics (RPL-P)
direct-render: Yes
dmesg | grep -iE 'secure|nvidia'
[ 0.000000] secureboot: Secure boot disabled
[ 0.008406] secureboot: Secure boot disabled
[ 1.471406] integrity: Loaded X.509 cert 'Secure Certificate: 01dcc89619884ca147983429f8a4a1a0'
[ 2.582156] sdhci: Secure Digital Host Controller Interface driver
[ 6.408471] Bluetooth: hci0: Secure boot is enabled
[ 6.494462] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 6.494608] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 6.494751] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 6.494785] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 7.528198] nvidia: loading out-of-tree module taints kernel.
[ 7.528206] nvidia: module license 'NVIDIA' taints kernel.
[ 7.536759] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 7.647747] nvidia-nvlink: Nvlink Core is being initialized, major device number 510
[ 7.648218] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 7.648312] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 7.695844] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 535.54.03 Tue Jun 6 22:20:39 UTC 2023
[ 7.762194] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 7.823875] nvidia-uvm: Loaded the UVM driver, major device number 508.
[ 7.880353] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 535.54.03 Tue Jun 6 22:17:39 UTC 2023
[ 7.883892] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 9.387522] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DP-2
[ 9.396589] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DP-2
[ 9.624934] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 17.200245] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout
[ 17.200248] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout
[ 30.837294] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout
[ 30.837299] [drm] [nvidia-drm] [GPU ID 0x00000100] Framebuffer memory not appropriate for scanout
cat /etc/X11/xorg.conf.d/nvidia.conf
#This file is provided by xorg-x11-drv-nvidia
#Do not edit
Section "OutputClass"
Identifier "nvidia"
MatchDriver "nvidia-drm"
Driver "nvidia"
Option "AllowEmptyInitialConfiguration"
Option "SLI" "Auto"
Option "BaseMosaic" "on"
Option "PrimaryGPU" "yes"
EndSection
Section "ServerLayout"
Identifier "layout"
Option "AllowNVIDIAGPUScreens"
Option "PrimaryGPU" "yes"
EndSection