After updating to 40, my system (Intel Wireless 7265) fails to associate with my AP.
NetworkManager[219027]: <info> [1725958739.4061] device (wlp2s0): supplicant interface state: authenticating -> associating
NetworkManager[219027]: <info> [1725958739.4062] device (p2p-dev-wlp2s0): supplicant management interface state: authenticating -> associating
kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 1/3)
kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 2/3)
kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 3/3)
kernel: wlp2s0: association with b0:95:75:24:a3:20 timed out
I have tried disabling NetworkManager and used wpa_supplicant and wpa_cli with similar results.
nl80211: Association request send successfully
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp2s0
nl80211: Delete station b0:95:75:24:a3:20
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp2s0
nl80211: MLME event 38; timeout with b0:95:75:24:a3:20
wlp2s0: Event ASSOC_TIMED_OUT (14) received
Odd thing is I only see this behavior on the 2.4 GHz band. I can still connect to the 5 GHz.
I think I had never connected to the 2.4 before, it might be new connections giving me trouble.
Steps I have gone thru so far:
- Cold reboot my system
- Reboot the AP
- Disabled MAC randomization
- Disabled power saving on the wireless interface
inxi -Fzxx
System:
Kernel: 6.10.8-200.fc40.x86_64 arch: x86_64 bits: 64 compiler: gcc
v: 2.41-37.fc40
Desktop: GNOME v: 46.4 tk: GTK v: 3.24.43 wm: gnome-shell dm: GDM
Distro: Fedora Linux 40 (Workstation Edition)
Machine:
Type: Laptop System: Dell product: Latitude E5550 v: 01
serial: <superuser required> Chassis: type: 9 serial: <superuser required>
Mobo: Dell model: 0R6N9P v: A00 serial: <superuser required>
part-nu: Latitude E5550 UEFI: Dell v: A06 date: 04/10/2015
Battery:
ID-1: BAT0 charge: 7.8 Wh (22.7%) condition: 34.4/54.2 Wh (63.5%) volts: 7.8
min: 7.5 model: Sanyo DELL R9XM953 serial: <filter> status: charging
CPU:
Info: dual core model: Intel Core i7-5600U bits: 64 type: MT MCP
arch: Broadwell rev: 4 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB
Speed (MHz): avg: 825 high: 1048 min/max: 500/3200 cores: 1: 953 2: 500
3: 800 4: 1048 bogomips: 20751
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel
arch: Gen-8 ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2
bus-ID: 00:02.0 chip-ID: 8086:1616
Device-2: NVIDIA GM108M [GeForce 840M] vendor: Dell driver: nvidia
v: 550.107.02 arch: Maxwell pcie: speed: 2.5 GT/s lanes: 4 bus-ID: 03:00.0
chip-ID: 10de:1341
Device-3: Sunplus Innovation Integrated_Webcam_HD driver: uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 2-1.6:4
chip-ID: 1bcf:2b8d
Display: x11 server: X.Org v: 1.20.14 with: Xwayland v: 24.1.2
compositor: gnome-shell driver: X: loaded: modesetting,nvidia
unloaded: fbdev,vesa alternate: nouveau,nv dri: iris gpu: i915
display-ID: :1 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96
Monitor-1: eDP-1 model: Samsung 0x4c48 res: 1920x1080 dpi: 142
diag: 395mm (15.5")
API: OpenGL v: 4.6 vendor: intel mesa v: 24.1.7 glx-v: 1.4 es-v: 3.2
direct-render: yes renderer: Mesa Intel HD Graphics 5500 (BDW GT2)
device-ID: 8086:1616
API: Vulkan v: 1.3.290 surfaces: xcb,xlib device: 0 type: integrated-gpu
driver: N/A device-ID: 8086:1616 device: 1 type: discrete-gpu driver: N/A
device-ID: 10de:1341 device: 2 type: cpu driver: N/A device-ID: 10005:0000
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c
Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
API: ALSA v: k6.10.8-200.fc40.x86_64 status: kernel-api
Server-1: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin
Network:
Device-1: Intel Ethernet I218-LM vendor: Dell driver: e1000e v: kernel
port: f080 bus-ID: 00:19.0 chip-ID: 8086:15a2
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel pcie:
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:095a
IF: wlp2s0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 bus-ID: 2-1.3:3 chip-ID: 8087:0a2a
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.2
lmp-v: 8
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
v: 3.0 bus-ID: 00:1f.2 chip-ID: 8086:282a
Drives:
Local Storage: total: 465.76 GiB used: 314.03 GiB (67.4%)
ID-1: /dev/sda vendor: Samsung model: SSD 850 EVO 500GB size: 465.76 GiB
speed: 6.0 Gb/s serial: <filter>
Partition:
ID-1: / size: 68.35 GiB used: 34.51 GiB (50.5%) fs: ext4 dev: /dev/dm-0
mapped: fedora_localhost--live-root
ID-2: /boot size: 973.4 MiB used: 752.4 MiB (77.3%) fs: ext4
dev: /dev/sda4
ID-3: /boot/efi size: 96 MiB used: 43.4 MiB (45.2%) fs: vfat
dev: /dev/sda2
ID-4: /home size: 379.18 GiB used: 278.75 GiB (73.5%) fs: ext4
dev: /dev/dm-2 mapped: fedora_localhost--live-home
Swap:
ID-1: swap-1 type: partition size: 7.84 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/dm-1 mapped: fedora_localhost--live-swap
ID-2: swap-2 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 51.0 C mobo: 42.0 C sodimm: SODIMM C
Fan Speeds (rpm): cpu: 0
Info:
Memory: total: 16 GiB available: 15.5 GiB used: 3.64 GiB (23.5%)
Processes: 294 Power: uptime: 38m wakeups: 0 Init: systemd v: 255
target: graphical (5) default: graphical
Packages: pm: flatpak pkgs: 9 Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.26
running-in: tmux: inxi: 3.3.34
journalctl -e --no-hostname
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.5918] device (wlp2s0): Activation: starting connection 'HomeHome' (2cf053ff-5bc9-4f3c-8995-83d3a4bfc47f)
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.5920] audit: op="connection-activate" uuid="2cf053ff-5bc9-4f3c-8995-83d3a4bfc47f" name="HomeHome" pid=2998 uid=1000 result="success"
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.5921] device (wlp2s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.5924] manager: NetworkManager state is now CONNECTING
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6045] device (wlp2s0): set-hw-addr: set-cloned MAC address to 6A:A5:87:6E:9D:DF (stable-ssid)
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6078] device (wlp2s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6081] device (wlp2s0): Activation: (wifi) access point 'HomeHome' has security, but secrets are required.
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6082] device (wlp2s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6083] sup-iface[588b8e0b1d27cf5a,1,wlp2s0]: wps: type pbc start...
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6095] device (wlp2s0): supplicant interface state: disconnected -> inactive
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6095] device (p2p-dev-wlp2s0): supplicant management interface state: disconnected -> inactive
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6097] device (wlp2s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6101] device (wlp2s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6116] device (wlp2s0): Activation: (wifi) connection 'HomeHome' has security, and secrets exist. No new secrets needed.
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6117] Config: added 'ssid' value 'HomeHome'
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6117] Config: added 'scan_ssid' value '1'
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6117] Config: added 'bgscan' value 'simple:30:-70:86400'
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6117] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK SAE FT-SAE'
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6118] Config: added 'psk' value '<hidden>'
Sep 12 07:02:35 wpa_supplicant[1452]: wlp2s0: WPS-PBC-ACTIVE
Sep 12 07:02:35 wpa_supplicant[1452]: wlp2s0: WPS-CANCEL
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6146] device (wlp2s0): supplicant interface state: inactive -> scanning
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6146] device (p2p-dev-wlp2s0): supplicant management interface state: inactive -> scanning
Sep 12 07:02:35 wpa_supplicant[1452]: wlp2s0: SME: Trying to authenticate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
Sep 12 07:02:35 kernel: wlp2s0: authenticate with b0:95:75:24:a3:20 (local address=6a:a5:87:6e:9d:df)
Sep 12 07:02:35 kernel: wlp2s0: send auth to b0:95:75:24:a3:20 (try 1/3)
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6522] device (wlp2s0): supplicant interface state: scanning -> authenticating
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6523] device (p2p-dev-wlp2s0): supplicant management interface state: scanning -> authenticating
Sep 12 07:02:35 wpa_supplicant[1452]: wlp2s0: Trying to associate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
Sep 12 07:02:35 kernel: wlp2s0: authenticated
Sep 12 07:02:35 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 1/3)
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6570] device (wlp2s0): supplicant interface state: authenticating -> associating
Sep 12 07:02:35 NetworkManager[1421]: <info> [1726142555.6570] device (p2p-dev-wlp2s0): supplicant management interface state: authenticating -> associating
Sep 12 07:02:35 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 2/3)
Sep 12 07:02:35 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 3/3)
Sep 12 07:02:35 kernel: wlp2s0: association with b0:95:75:24:a3:20 timed out
Sep 12 07:02:36 NetworkManager[1421]: <info> [1726142556.0105] device (wlp2s0): supplicant interface state: associating -> disconnected
Sep 12 07:02:36 NetworkManager[1421]: <info> [1726142556.0107] device (p2p-dev-wlp2s0): supplicant management interface state: associating -> disconnected
Sep 12 07:02:36 NetworkManager[1421]: <info> [1726142556.1081] device (wlp2s0): supplicant interface state: disconnected -> scanning
Sep 12 07:02:36 NetworkManager[1421]: <info> [1726142556.1082] device (p2p-dev-wlp2s0): supplicant management interface state: disconnected -> scanning
Sep 12 07:02:37 wpa_supplicant[1452]: wlp2s0: SME: Trying to authenticate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
Sep 12 07:02:37 kernel: wlp2s0: authenticate with b0:95:75:24:a3:20 (local address=6a:a5:87:6e:9d:df)
Sep 12 07:02:37 kernel: wlp2s0: send auth to b0:95:75:24:a3:20 (try 1/3)
Sep 12 07:02:37 NetworkManager[1421]: <info> [1726142557.1698] device (wlp2s0): supplicant interface state: scanning -> authenticating
Sep 12 07:02:37 NetworkManager[1421]: <info> [1726142557.1699] device (p2p-dev-wlp2s0): supplicant management interface state: scanning -> authenticating
Sep 12 07:02:37 kernel: wlp2s0: send auth to b0:95:75:24:a3:20 (try 2/3)
Sep 12 07:02:37 kernel: wlp2s0: authenticated
Sep 12 07:02:37 wpa_supplicant[1452]: wlp2s0: Trying to associate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
Sep 12 07:02:37 NetworkManager[1421]: <info> [1726142557.2823] device (wlp2s0): supplicant interface state: authenticating -> associating
Sep 12 07:02:37 NetworkManager[1421]: <info> [1726142557.2824] device (p2p-dev-wlp2s0): supplicant management interface state: authenticating -> associating
Sep 12 07:02:37 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 1/3)
Sep 12 07:02:37 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 2/3)
Sep 12 07:02:37 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 3/3)
Sep 12 07:02:37 kernel: wlp2s0: association with b0:95:75:24:a3:20 timed out
Sep 12 07:02:37 NetworkManager[1421]: <info> [1726142557.6191] device (wlp2s0): supplicant interface state: associating -> disconnected
Sep 12 07:02:37 NetworkManager[1421]: <info> [1726142557.6192] device (p2p-dev-wlp2s0): supplicant management interface state: associating -> disconnected
Sep 12 07:02:38 NetworkManager[1421]: <info> [1726142558.1172] device (wlp2s0): supplicant interface state: disconnected -> scanning
Sep 12 07:02:38 NetworkManager[1421]: <info> [1726142558.1173] device (p2p-dev-wlp2s0): supplicant management interface state: disconnected -> scanning
Sep 12 07:02:39 wpa_supplicant[1452]: wlp2s0: SME: Trying to authenticate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
Sep 12 07:02:39 kernel: wlp2s0: authenticate with b0:95:75:24:a3:20 (local address=6a:a5:87:6e:9d:df)
Sep 12 07:02:39 kernel: wlp2s0: send auth to b0:95:75:24:a3:20 (try 1/3)
Sep 12 07:02:39 NetworkManager[1421]: <info> [1726142559.1814] device (wlp2s0): supplicant interface state: scanning -> authenticating
Sep 12 07:02:39 NetworkManager[1421]: <info> [1726142559.1815] device (p2p-dev-wlp2s0): supplicant management interface state: scanning -> authenticating
Sep 12 07:02:39 kernel: wlp2s0: send auth to b0:95:75:24:a3:20 (try 2/3)
Sep 12 07:02:39 wpa_supplicant[1452]: wlp2s0: Trying to associate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
Sep 12 07:02:39 kernel: wlp2s0: authenticated
Sep 12 07:02:39 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 1/3)
Sep 12 07:02:39 NetworkManager[1421]: <info> [1726142559.2914] device (wlp2s0): supplicant interface state: authenticating -> associating
Sep 12 07:02:39 NetworkManager[1421]: <info> [1726142559.2914] device (p2p-dev-wlp2s0): supplicant management interface state: authenticating -> associating
Sep 12 07:02:39 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 2/3)
Sep 12 07:02:39 kernel: wlp2s0: associate with b0:95:75:24:a3:20 (try 3/3)
Sep 12 07:02:39 kernel: wlp2s0: association with b0:95:75:24:a3:20 timed out
Sep 12 07:02:39 NetworkManager[1421]: <info> [1726142559.6642] device (wlp2s0): supplicant interface state: associating -> disconnected
Sep 12 07:02:39 NetworkManager[1421]: <info> [1726142559.6642] device (p2p-dev-wlp2s0): supplicant management interface state: associating -> disconnected
wpa_supplicant -i wlp2s0 -c /etc/wpa_supplicant/wpa_supplicant.conf -d
wpa_supplicant v2.11
random: getrandom() support available
Successfully initialized wpa_supplicant
Initializing interface 'wlp2s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wheel'
nl80211: Kernel version: Linux 6.10.8-200.fc40.x86_64 (#1 SMP PREEMPT_DYNAMIC Wed Sep 4 21:41:11 UTC 2024; x86_64)
nl80211: Maximum supported attribute ID: 330
nl80211: Initialize interface wlp2s0 (driver: iwlwifi)
...
...
...
wlp2s0: Control interface command 'SCAN'
wlp2s0: Setting scan request: 0.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Determining shared radio frequencies (max len 2)
wlp2s0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11
P2P: cli_channels:
wlp2s0: Starting AP scan for wildcard SSID
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (3108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 6
wlp2s0: Add radio work 'scan'@0x559e928d4e60
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x559e928d4e60 after 0.000072 second wait
wlp2s0: nl80211: scan request
nl80211: Scan co-located APs on 6 GHz
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000042 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 3.600313 seconds
nl80211: Received scan results (8 BSSes)
wlp2s0: BSS: Start scan result update 1
wlp2s0: BSS: Add new id 0 BSSID b0:95:75:24:a3:1f SSID 'HomeHome_5G' freq 5180
wlp2s0: BSS: Add new id 1 BSSID b0:95:75:24:a3:20 SSID 'HomeHome' freq 2432
wlp2s0: BSS: Add new id 2 BSSID b0:be:76:67:01:ba SSID 'Abrikosovaya_26' freq 2462
wlp2s0: BSS: Add new id 3 BSSID 44:2a:8f:02:52:c4 SSID 'AP_2787720176' freq 2432
wlp2s0: BSS: Add new id 4 BSSID 00:5f:67:55:ff:9b SSID 'TP-Link_FF9C' freq 2447
wlp2s0: BSS: Add new id 5 BSSID c4:ad:34:73:81:e3 SSID 'dacha13' freq 2412
wlp2s0: BSS: Add new id 6 BSSID bc:62:ce:71:ee:cd SSID 'Ralco' freq 2452
wlp2s0: BSS: Add new id 7 BSSID 04:8d:38:c4:ad:41 SSID 'HRENAVAMSOSEDI' freq 2437
BSS: last_scan_res_used=8/32
wlp2s0: New scan results available (own=1 ext=0)
WPS: AP b0:95:75:24:a3:1f type 0 added
WPS: AP b0:95:75:24:a3:20 type 0 added
WPS: AP b0:be:76:67:01:ba type 0 added
WPS: AP 00:5f:67:55:ff:9b type 0 added
WPS: AP[0] b0:95:75:24:a3:1f type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[1] b0:95:75:24:a3:20 type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[2] b0:be:76:67:01:ba type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[3] 00:5f:67:55:ff:9b type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
Control interface recv command from: /tmp/wpa_ctrl_8967-1\x00
wlp2s0: Control interface command 'SCAN_RESULTS'
Control interface recv command from: /tmp/wpa_ctrl_8967-1\x00
wlp2s0: Control interface command 'ADD_NETWORK'
CTRL_IFACE: ADD_NETWORK
Control interface recv command from: /tmp/wpa_ctrl_8967-1\x00
wlp2s0: Control interface command 'LIST_NETWORKS'
Control interface recv command from: /tmp/wpa_ctrl_8967-1\x00
wlp2s0: Control interface command 'SET_NETWORK [REMOVED]'
CTRL_IFACE: SET_NETWORK id=0 name='ssid'
CTRL_IFACE: value - hexdump_ascii(len=10): [REMOVED]
Control interface recv command from: /tmp/wpa_ctrl_8967-1\x00
wlp2s0: Control interface command 'SET_NETWORK [REMOVED]'
CTRL_IFACE: SET_NETWORK id=0 name='psk'
CTRL_IFACE: value - hexdump_ascii(len=12): [REMOVED]
Control interface recv command from: /tmp/wpa_ctrl_8967-1\x00
wlp2s0: Control interface command 'ENABLE_NETWORK 0'
CTRL_IFACE: ENABLE_NETWORK id=0
Fast associate: Old scan results
wlp2s0: Setting scan request: 0.000000 sec
wlp2s0: State: INACTIVE -> SCANNING
wlp2s0: Determining shared radio frequencies (max len 2)
wlp2s0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11
P2P: cli_channels:
wlp2s0: Starting AP scan for wildcard SSID
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (3108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 6
wlp2s0: Add radio work 'scan'@0x559e928d7170
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x559e928d7170 after 0.000039 second wait
wlp2s0: nl80211: scan request
nl80211: Scan co-located APs on 6 GHz
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000038 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 1.012217 seconds
nl80211: Received scan results (6 BSSes)
wlp2s0: BSS: Start scan result update 2
wlp2s0: BSS: Add new id 8 BSSID ac:22:0b:8d:3c:c8 SSID 'ASUS36' freq 2462
BSS: last_scan_res_used=6/32
wlp2s0: New scan results available (own=1 ext=0)
WPS: AP ac:22:0b:8d:3c:c8 type 0 added
WPS: AP[0] b0:95:75:24:a3:1f type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[1] b0:95:75:24:a3:20 type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[2] b0:be:76:67:01:ba type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[3] 00:5f:67:55:ff:9b type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
WPS: AP[4] ac:22:0b:8d:3c:c8 type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
wlp2s0: Radio work 'scan'@0x559e928d7170 done in 1.014611 seconds
wlp2s0: radio_work_free('scan'@0x559e928d7170): num_active_works --> 0
wlp2s0: Selecting BSS from priority group 0
wlp2s0: 0: b0:95:75:24:a3:1f ssid='HomeHome_5G' wpa_ie_len=26 rsn_ie_len=24 caps=0x511 level=-67 freq=5180 wps
wlp2s0: skip - SSID mismatch
wlp2s0: 1: b0:95:75:24:a3:20 ssid='HomeHome' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-47 freq=2432 wps
wlp2s0: selected based on RSN IE
wlp2s0: MLD: No Multi-Link element
wlp2s0: selected BSS b0:95:75:24:a3:20 ssid='HomeHome'
wlp2s0: Considering connect request: reassociate: 1 selected: b0:95:75:24:a3:20 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x559e928ec920 current_ssid=(nil)
wlp2s0: Request association with b0:95:75:24:a3:20
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlp2s0: No ongoing scan/p2p-scan found to abort
wlp2s0: Add radio work 'sme-connect'@0x559e928d7170
wlp2s0: First radio work item in the queue - schedule start immediately
p2p-dev-wlp2s0: Updating scan results from sibling
nl80211: Received scan results (6 BSSes)
p2p-dev-wlp2s0: BSS: Start scan result update 2
p2p-dev-wlp2s0: BSS: Add new id 8 BSSID ac:22:0b:8d:3c:c8 SSID 'ASUS36' freq 2462
BSS: last_scan_res_used=6/32
wlp2s0: Starting radio work 'sme-connect'@0x559e928d7170 after 0.000387 second wait
wlp2s0: WPA: clearing own WPA/RSN IE
wlp2s0: RSN: clearing own RSNXE
wlp2s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID b0:95:75:24:a3:20
RSN: No PMKSA cache entry found
wlp2s0: RSN: using IEEE 802.11i/D9.0
wlp2s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
wlp2s0: WPA: Selected mgmt group cipher 32
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
wlp2s0: WPA: clearing AP RSNXE
wlp2s0: WPA: AP group 0x8 network profile group 0x18; available group 0x8
wlp2s0: WPA: using GTK TKIP
wlp2s0: WPA: AP pairwise 0x18 network profile pairwise 0x18; available pairwise 0x18
wlp2s0: WPA: using PTK CCMP
wlp2s0: WPA: AP key_mgmt 0x2 network profile key_mgmt 0x3; available key_mgmt 0x2
wlp2s0: WPA: using KEY_MGMT WPA-PSK
wlp2s0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlp2s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: Set PMK based on external data - hexdump(len=32): [REMOVED]
RRM: Determining whether RRM can be used - device support: 0x10
RRM: No RRM in network
Added supported operating classes IE - hexdump(len=23): 3b 15 53 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f 80 00 82 80
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlp2s0: Cancelling scan request
wlp2s0: SME: Trying to authenticate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
EAPOL: External notification - portValid=0
wlp2s0: State: SCANNING -> AUTHENTICATING
wlp2s0: Determining shared radio frequencies (max len 2)
wlp2s0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11
P2P: cli_channels:
nl80211: Authenticate (ifindex=3)
* bssid=b0:95:75:24:a3:20
* freq=2432
* SSID=HomeHome
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp2s0
nl80211: New station b0:95:75:24:a3:20
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp2s0
nl80211: Authenticate event
wlp2s0: Event AUTH (10) received
wlp2s0: SME: Authentication response: peer=b0:95:75:24:a3:20 auth_type=0 auth_transaction=2 status_code=0
SME: Association Request IEs - hexdump(len=57): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 7f 0a 04 00 ca 02 01 00 00 c0 01 20 3b 15 53 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f 80 00 82 80
wlp2s0: Trying to associate with b0:95:75:24:a3:20 (SSID='HomeHome' freq=2432 MHz)
wlp2s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: Determining shared radio frequencies (max len 2)
wlp2s0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11
P2P: cli_channels:
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
wlp2s0: RSN: clearing own RSNXE
nl80211: Associate (ifindex=3)
* bssid=b0:95:75:24:a3:20
* freq=2432
* SSID=HomeHome
* IEs - hexdump(len=57): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 7f 0a 04 00 ca 02 01 00 00 c0 01 20 3b 15 53 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f 80 00 82 80
* WPA Versions 0x2
* pairwise=0xfac04
* group=0xfac02
* akm[0]=0xfac02
nl80211: Association request send successfully
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp2s0
nl80211: Delete station b0:95:75:24:a3:20
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp2s0
nl80211: MLME event 38; timeout with b0:95:75:24:a3:20
wlp2s0: Event ASSOC_TIMED_OUT (14) received
wlp2s0: SME: Association timed out
wlp2s0: Radio work 'sme-connect'@0x559e928d7170 done in 0.349415 seconds
wlp2s0: radio_work_free('sme-connect'@0x559e928d7170): num_active_works --> 0
wlp2s0: Added BSSID b0:95:75:24:a3:20 into ignore list, ignoring for 10 seconds
wlp2s0: Consecutive connection failures: 1 --> request scan in 100 ms
wlp2s0: Setting scan request: 0.100000 sec
nl80211: Data frame filter flags=0x0
wlp2s0: State: ASSOCIATING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: Determining shared radio frequencies (max len 2)
wlp2s0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11
P2P: cli_channels:
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wlp2s0: State: DISCONNECTED -> SCANNING
...
...
...
wlp2s0: State: SCANNING -> AUTHENTICATING
...
...
...
wlp2s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: Determining shared radio frequencies (max len 2)
wlp2s0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11
P2P: cli_channels:
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
wlp2s0: RSN: clearing own RSNXE
nl80211: Associate (ifindex=3)
* bssid=b0:95:75:24:a3:20
* freq=2432
* SSID=HomeHome
* IEs - hexdump(len=57): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 7f 0a 04 00 ca 02 01 00 00 c0 01 20 3b 15 53 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f 80 00 82 80
* WPA Versions 0x2
* pairwise=0xfac04
* group=0xfac02
* akm[0]=0xfac02
nl80211: Association request send successfully
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp2s0
nl80211: Delete station b0:95:75:24:a3:20
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp2s0
nl80211: MLME event 38; timeout with b0:95:75:24:a3:20
wlp2s0: Event ASSOC_TIMED_OUT (14) received
wlp2s0: SME: Association timed out
wlp2s0: Radio work 'sme-connect'@0x559e928d7170 done in 0.448952 seconds
wlp2s0: radio_work_free('sme-connect'@0x559e928d7170): num_active_works --> 0
wlp2s0: Added BSSID b0:95:75:24:a3:20 into ignore list, ignoring for 10 seconds
wlp2s0: Consecutive connection failures: 2 --> request scan in 500 ms
...
...
...
wpa_cli
scan
scan_results
add_network
set_network 0 ssid "HomeHome"
set_netowrk 0 psk "my_really_secure_wifi_pwd"
enable_network 0