Hola, no puedo hacer funcionar la imoresora DCP-J132W
Puedo descargar e instalar los paquetes rpm e instalar con yum localinstall o con dnf pero cuado quiero imprimir somplemente dice que no se puede imprimir. Tambien tengo los repositorios privativos instalados.
Descargese los paquetes de aqui:
- Printer Drivers
- LPR printer driver (rpm package)
- CUPSwrapper printer driver (rpm package)
- Scanner Driver
- Scanner driver 64bit (rpm package)
y sigue estos pasos:
-
Login as a superuser.
-
Download LPR driver.
-
Install the driver.
-
Turn on the printer and connect the usb, network or parallel cable.
-
Go to the directory where the driver is.
-
Install LPR driver.The install process may take some time. Please wait until it is complete.
Command : rpm -ihv --nodeps (lpr-drivername) -
Check if the LPR driver is installed.
Command : rpm -qa | grep -e (lpr-drivername) -
Confirm/Configure a file according to your connection.
-
Check the configuration filename for your distribution.
Example:
openSUSE, Ubuntu, Debian : /etc/printcap
Redhat, fedora, Mandriva : /etc/printcap.local -
Edit the file according to your connection.
For USB Connection (Default)
Check if the parameter of “:lp” is “:lp=/dev/usb/lp0”
For Network Connection
replace “:lp” line to the following 2 lines
:rm=(ip address of your printer)
:rp=lp
For Parallel Connection
replace “:lp” line to the following line
:lp=/dev/lp0\ -
Restart the print system.
Command (for lpr): /etc/init.d/lpr restart
Command (for lprng) : /etc/init.d/lprng restart -
Try a test print.
Saludos.,
graciasm por tu ayuda Héctor pero sigue sin funcionar