On desktop I am running KDE Fedora 38. This issue seems to be similar to this one: Boot fails: btrfs errno=-17 Object already exists @victor-borges can you help me? When I boot the following error is shown:
Boot Error Message
[3.039669] BTRFS: error (device sda3: state A) in _btrfs_run_delayed_items: 1158: errno=-17 Object already exists
[3.040269] BTRFS: error (device sda3: state EA) in btrfs_replay_log:2322: errno=-17 Object already exists (Failed to recover log tree)
[FAILED] Failed to mount sysroot.mount - /sysroot.
[DEPEND] Dependency failed for initrd-root-fs.target - Initrd Root File System.
[DEPEND] Dependency failed for initrd-parse-etc.service - Mountpoints Configured in the Real Root.
Generating "/run/initramfs/resosreport.txt"
Entering emergency mode. Exit the shell to continue. Type "Journalctl" to view system logs. You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot after mounting them and attach it to a bug report.
EDIT: Thanks to @chrismurphy I was able to use fedora once again without reinstalling. See solution below.
My understanding is, that there is a problem with the btrfs filesystem on my root partition (/dev/sda3). The error prevents the system from mounting the root partition and booting it up.
What I did:
- Boot into live usb environment
- After running
btrfs check -p --readonly /dev/sda3i get no error - I get the following error when trying to mount
sudo mount /dev/sda3 /mnt:
Summary
ˋˋˋ
mount: /mnt: mount(2) system call failed: File exists.
dmesg(1) may have more information after falied mount system call.
ˋˋˋ
That means I am not able to use btrfs-rescue
Using the command dmesg -H I got this log:
dmesg
ˋˋˋ
[Sep21 12:35] Linux version 6.2.9-300.fc38.x86_64 (mockbuild@38f30b3c0c69453fae61718fc43f33bc) (gcc (GCC) 13.>
[ +0.000000] Command line: BOOT_IMAGE=/images/pxeboot/vmlinuz root=live:CDLABEL=Fedora-KDE-Live-38-1-6 rd.li>
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x200: ‘Protection Keys User registers’
[ +0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0.000000] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ +0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using ‘compacted’ format.
[ +0.000000] signal: max sigframe size: 3376
[ +0.000000] BIOS-provided physical RAM map:
[ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ +0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable
[ +0.000000] BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ +0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
[ +0.000000] BIOS-e820: [mem 0x000000000a20d000-0x00000000bb0a0fff] usable
[ +0.000000] BIOS-e820: [mem 0x00000000bb0a1000-0x00000000bb0a1fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000bb0a2000-0x00000000cad41fff] usable
[ +0.000000] BIOS-e820: [mem 0x00000000cad42000-0x00000000cb0a2fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000cb0a3000-0x00000000cb106fff] ACPI data
[ +0.000000] BIOS-e820: [mem 0x00000000cb107000-0x00000000ccc06fff] ACPI NVS
[ +0.000000] BIOS-e820: [mem 0x00000000ccc07000-0x00000000cdbfefff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000cdbff000-0x00000000ceffffff] usable
[ +0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd4fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000072e33ffff] usable
[ +0.000000] BIOS-e820: [mem 0x000000072e340000-0x000000082fffffff] reserved
[ +0.000000] NX (Execute Disable) protection: active
[ +0.000000] e820: update [mem 0xc39fc018-0xc3a0a057] usable ==> usable
[ +0.000000] e820: update [mem 0xc39fc018-0xc3a0a057] usable ==> usable
[ +0.000000] e820: update [mem 0xc39ee018-0xc39fb857] usable ==> usable
[ +0.000000] e820: update [mem 0xc39ee018-0xc39fb857] usable ==> usable
[ +0.000000] extended physical RAM map:
[ +0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ +0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d81fff] usable
[ +0.000000] reserve setup_data: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ +0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
[ +0.000000] reserve setup_data: [mem 0x000000000a20d000-0x00000000bb0a0fff] usable
[ +0.000000] reserve setup_data: [mem 0x00000000bb0a1000-0x00000000bb0a1fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000bb0a2000-0x00000000c39ee017] usable
[ +0.000000] reserve setup_data: [mem 0x00000000c39ee018-0x00000000c39fb857] usable
[ +0.000000] reserve setup_data: [mem 0x00000000c39fb858-0x00000000c39fc017] usable
[ +0.000000] reserve setup_data: [mem 0x00000000c39fc018-0x00000000c3a0a057] usable
[ +0.000000] reserve setup_data: [mem 0x00000000c3a0a058-0x00000000cad41fff] usable
[ +0.000000] reserve setup_data: [mem 0x00000000cad42000-0x00000000cb0a2fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000cb0a3000-0x00000000cb106fff] ACPI data
[ +0.000000] reserve setup_data: [mem 0x00000000cb107000-0x00000000ccc06fff] ACPI NVS
[ +0.000000] reserve setup_data: [mem 0x00000000ccc07000-0x00000000cdbfefff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000cdbff000-0x00000000ceffffff] usable
[ +0.000000] reserve setup_data: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fd400000-0x00000000fd4fffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000072e33ffff] usable
[ +0.000000] reserve setup_data: [mem 0x000000072e340000-0x000000082fffffff] reserved
[ +0.000000] efi: EFI v2.70 by American Megatrends
[ +0.000000] efi: ACPI=0xccbee000 ACPI 2.0=0xccbee014 TPMFinalLog=0xcbbb8000 SMBIOS=0xcda05000 MEMATTR=0xc84>
[ +0.000000] random: crng init done
[ +0.000000] efi: Remove mem331: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ +0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ +0.000000] efi: Remove mem332: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
[ +0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] reserved
[ +0.000000] efi: Remove mem333: MMIO range=[0xfd400000-0xfd4fffff] (1MB) from e820 map
[ +0.000000] e820: remove [mem 0xfd400000-0xfd4fffff] reserved
[ +0.000000] efi: Not removing mem334: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ +0.000000] efi: Remove mem335: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ +0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ +0.000000] efi: Not removing mem336: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ +0.000000] efi: Not removing mem337: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ +0.000000] efi: Not removing mem338: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ +0.000000] efi: Not removing mem339: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ +0.000000] efi: Not removing mem340: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ +0.000000] efi: Not removing mem341: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ +0.000000] efi: Remove mem342: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ +0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ +0.000000] secureboot: Secure boot disabled
[ +0.000000] SMBIOS 2.8 present.
[ +0.000004] btrfs_mount_root+0x477/0x550
[ +0.000002] legacy_get_tree+0x27/0x50
[ +0.000001] vfs_get_tree+0x25/0xd0
[ +0.000002] vfs_kern_mount.part.0+0x73/0xb0
[ +0.000001] btrfs_mount+0x149/0x430
[ +0.000001] ? cred_has_capability.isra.0+0xbc/0x170
[ +0.000002] legacy_get_tree+0x27/0x50
[ +0.000001] vfs_get_tree+0x25/0xd0
[ +0.000002] path_mount+0x49d/0xad0
[ +0.000001] __x64_sys_mount+0x116/0x150
[ +0.000002] do_syscall_64+0x5b/0x80
[ +0.000001] ? syscall_exit_to_user_mode+0x17/0x40
[ +0.000001] ? do_syscall_64+0x67/0x80
[ +0.000001] ? syscall_exit_to_user_mode+0x17/0x40
[ +0.000002] ? exc_page_fault+0x70/0x170
[ +0.000001] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ +0.000001] RIP: 0033:0x7f4fa7d17c9e
[ +0.000005] Code: 48 8b 0d 6d 11 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3a 11 0c 00 f7 d8 64 89 01 48
[ +0.000001] RSP: 002b:00007ffd4a89a558 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[ +0.000001] RAX: ffffffffffffffda RBX: 00005635eec61550 RCX: 00007f4fa7d17c9e
[ +0.000001] RDX: 00005635eec68010 RSI: 00005635eec617a0 RDI: 00005635eec61780
[ +0.000000] RBP: 00007ffd4a89a680 R08: 0000000000000000 R09: 0000000000000007
[ +0.000000] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ +0.000001] R13: 00005635eec61780 R14: 00005635eec68010 R15: 00007f4fa7e48076
[ +0.000001]
[ +0.000000] —[ end trace 0000000000000000 ]—
[ +0.000076] BTRFS error (device sda3: state EA): open_ctree failed
ˋˋˋ
In contrast to this issue Boot fails: btrfs errno=-17 Object already exists i only have one error: BTRFS error (device sda3: state EA): open_ctree failed
I then ran sudo btrfs check --check-data-csum -p /dev/sda3 and there are no errors:
btrfs check
ˋˋˋ
[liveuser@localhost-live ~]$ btrfs check --check-data-csum -p /dev/sda3
Opening filesystem to check…
ERROR: mount check: cannot open /dev/sda3: Permission denied
ERROR: could not check mount status: Permission denied
[liveuser@localhost-live ~]$ sudo btrfs check --check-data-csum -p /dev/sda3
Opening filesystem to check…
Checking filesystem on /dev/sda3
UUID: 12cf0bf3-cfd6-4d5e-8aeb-ec68cd2a6a4d
[1/7] checking root items (0:00:02 elapsed, 1588400 items checked)
[2/7] checking extents (0:00:25 elapsed, 259279 items checked)
[3/7] checking free space tree (0:00:00 elapsed, 184 items checked)
[4/7] checking fs roots (0:00:07 elapsed, 237343 items checked)
[5/7] checking csums against data (0:05:35 elapsed, 510628 items checked)
[6/7] checking root refs (0:00:00 elapsed, 346 items checked)
[7/7] checking quota groups skipped (not enabled on this FS)
found 122468433920 bytes used, no error found
total csum bytes: 114260504
total tree bytes: 4242259968
total fs tree bytes: 3908206592
total extent tree bytes: 173965312
btree space waste bytes: 853216110
file data blocks allocated: 2355198095360
referenced 187968995328
ˋˋˋ
After running lsblk -f you can see that partition two is mounted only sda3 is not mountable:
lsblk -f
ˋˋˋ
[liveuser@localhost-live ~]$ lsblk -f
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
loop0 squashfs 4.0
loop1 ext4 1.0 Anaconda 7b318fc8-839a-460c-b953-f3c40a7a9394
├─live-rw ext4 1.0 Anaconda 7b318fc8-839a-460c-b953-f3c40a7a9394 1.2G 83% /
└─live-base ext4 1.0 Anaconda 7b318fc8-839a-460c-b953-f3c40a7a9394 1.4G 81% /run/media/liveuser/Anaconda
loop2
└─live-rw ext4 1.0 Anaconda 7b318fc8-839a-460c-b953-f3c40a7a9394 1.2G 83% /
sda
├─sda1 vfat FAT32 C521-9F30
├─sda2 xfs a346b9fb-1913-4e06-992d-6191c9221c55 690.2M 28% /run/media/liveuser/a346b9fb-1913-4e06-992d-6191c9221c55
└─sda3 btrfs fedora_wladefant-pc 12cf0bf3-cfd6-4d5e-8aeb-ec68cd2a6a4d
sdb
└─sdb1 ntfs Personal 541A77671A7744D0
sdc
├─sdc1 exfat 1.0 Ventoy 4E21-0000
└─sdc2 vfat FAT16 VTOYEFI F767-A619
zram0 [SWAP]
nvme1n1
└─nvme1n1p1 ntfs M2 SSD 101C166A101C166A 457.3G 51% /run/media/liveuser/M2 SSD
nvme0n1
└─nvme0n1p1 ntfs A45C93AE5C9379AE 318.3G 32% /run/media/liveuser/A45C93AE5C9379AE
[liveuser@localhost-live ~]$
ˋˋˋ
now i tried to mount sda3 with uuid and got the same error message as before
Summary
[liveuser@localhost-live ~]$ sudo mount -t btrfs -o subvol=root,compress=zstd:1 UUID=12cf0bf3-cfd6-4d5e-8aeb-ec68cd2a6a4d /mnt
mount: /mnt: mount(2) system call failed: File exists.
dmesg(1) may have more information after failed mount system call.
[liveuser@localhost-live ~]$
after doing smartctl i got some error messages, in contrast to @victor-borges :
smartctl full log
[liveuser@localhost-live ~]$ sudo smartctl -a /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.9-300.fc38.x86_64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: CT500MX500SSD1
Serial Number: 2030E2BB08C6
LU WWN Device Id: 5 00a075 1e2bb08c6
Firmware Version: M3CR023
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5417
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Sep 21 13:34:28 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3702
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1613
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0032 093 093 000 Old_age Always - 111
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 109
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 46
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 065 045 000 Old_age Always - 35 (Min/Max 0/55)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Percent_Lifetime_Remain 0x0030 093 093 001 Old_age Offline - 7
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 30765713089
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 533786267
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 462395677
SMART Error Log Version: 1
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 ec 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 786 -
# 2 Short offline Completed without error 00% 779 -
# 3 Short offline Completed without error 00% 718 -
# 4 Short offline Completed without error 00% 716 -
# 5 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[liveuser@localhost-live ~]$
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 ec 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA
I am a nooby. Can someone guide me through the process?
