Hello!
Having an issue where only one monitor can be detected after upgrading my GPU. I have a 2 monitor set up that was working fine with my previous GPU (AMD 7800XT). I fortunately just upgraded to the AMD 9070XT today but i cant get both monitors to work at the same time.
I have both on display port to the GPU but only the main one will be detected. If i unplug the main one and leave the 2nd one plugged in, it will be detected after a reboot but then the main one wont be detected until i plug it back in and reboot ( which then the 2nd one will stop being detected)
I have tried using 1 display port cable and 1 HDMI cable with no luck
I did try unplugging and rebooting a few times with no luck as well as sudo dnf update to make sure everything was up to date
looking for any suggestions
below are the results of inxi -Fzxx
It looks like under “Graphics: Device-1 lists the driver as N/A”, not sure if that’s a concern there while Device-2 lists amdgpu, i assume device-2 is the onboard graphics, or the previous card
System:
Kernel: 6.11.4-301.fc41.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
Desktop: GNOME v: 47.4 tk: GTK v: 3.24.43 wm: gnome-shell dm: GDM
Distro: Fedora Linux 41 (Workstation Edition)
Machine:
Type: Desktop Mobo: Micro-Star model: MAG X670E TOMAHAWK WIFI (MS-7E12)
v: 1.0 serial: UEFI: American Megatrends LLC. v: 1.F0
date: 10/08/2024
CPU:
Info: 12-core model: AMD Ryzen 9 9900X bits: 64 type: MT MCP arch: N/A
rev: 0 cache: L1: 960 KiB L2: 12 MiB L3: 64 MiB
Speed (MHz): avg: 3638 min/max: 600/5658 boost: enabled cores: 1: 3638
2: 3638 3: 3638 4: 3638 5: 3638 6: 3638 7: 3638 8: 3638 9: 3638 10: 3638
11: 3638 12: 3638 13: 3638 14: 3638 15: 3638 16: 3638 17: 3638 18: 3638
19: 3638 20: 3638 21: 3638 22: 3638 23: 3638 24: 3638 bogomips: 210815
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 48 [RX 9070/9070 XT]
vendor: Gigabyte driver: N/A pcie: speed: 32 GT/s lanes: 16 bus-ID: 03:00.0
chip-ID: 1002:7550
Device-2: Advanced Micro Devices [AMD/ATI] Granite Ridge [Radeon Graphics]
vendor: Micro-Star MSI driver: amdgpu v: kernel pcie: speed: 16 GT/s
lanes: 16 ports: active: none empty: DP-1, DP-2, DP-3, HDMI-A-1,
Writeback-1 bus-ID: 18:00.0 chip-ID: 1002:13c0 temp: 36.0 C
Display: wayland server: X.Org v: 24.1.6 with: Xwayland v: 24.1.6
compositor: gnome-shell driver: dri: radeonsi gpu: amdgpu display-ID: :0
screens: 1
Screen-1: 0 s-res: 5120x2880 s-dpi: 96
Monitor-1: Unknown-1 mapped: None-1 res: 5120x2880 hz: 60 dpi: 128
API: OpenGL v: 4.6 vendor: amd mesa v: 25.0.0 glx-v: 1.4 es-v: 3.2
direct-render: yes renderer: AMD Radeon Graphics (radeonsi
raphael_mendocino LLVM 19.1.7 DRM 3.59 6.11.4-301.fc41.x86_64)
device-ID: 1002:13c0
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Info: Tools: api: glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] driver: snd_hda_intel v: kernel
pcie: speed: 32 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab40
Device-2: Advanced Micro Devices [AMD/ATI] Rembrandt Radeon High
Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: speed: 16 GT/s lanes: 16 bus-ID: 18:00.1 chip-ID: 1002:1640
Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s
lanes: 16 bus-ID: 18:00.6 chip-ID: 1022:15e3
Device-4: Logitech G733 Gaming Headset
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 bus-ID: 7-2:2 chip-ID: 046d:0b1f
API: ALSA v: k6.11.4-301.fc41.x86_64 status: kernel-api
Server-1: JACK v: 1.9.22 status: off
Server-2: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
v: kernel pcie: speed: 5 GT/s lanes: 1 port: e000 bus-ID: 08:00.0
chip-ID: 10ec:8125
IF: enp8s0 state: down mac:
Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
driver: mt7921e v: kernel pcie: speed: 5 GT/s lanes: 1 bus-ID: 0f:00.0
chip-ID: 14c3:0616
IF: wlp15s0 state: up mac:
Bluetooth:
Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
speed: 480 Mb/s lanes: 1 bus-ID: 3-7:4 chip-ID: 0e8d:0616
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: bt-v: 5.2
lmp-v: 11
Drives:
Local Storage: total: 1.82 TiB used: 415.07 GiB (22.3%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 990 PRO 2TB size: 1.82 TiB
speed: 63.2 Gb/s lanes: 4 serial: temp: 35.9 C
Partition:
ID-1: / size: 1.82 TiB used: 414.64 GiB (22.3%) fs: btrfs
dev: /dev/nvme0n1p3
ID-2: /boot size: 973.4 MiB used: 417.3 MiB (42.9%) fs: ext4
dev: /dev/nvme0n1p2
ID-3: /boot/efi size: 598.8 MiB used: 19.4 MiB (3.2%) fs: vfat
dev: /dev/nvme0n1p1
ID-4: /home size: 1.82 TiB used: 414.64 GiB (22.3%) fs: btrfs
dev: /dev/nvme0n1p3
Swap:
ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 41.6 C mobo: 36.0 C gpu: amdgpu temp: 37.0 C
Fan Speeds (rpm): N/A
Info:
Memory: total: 32 GiB note: est. available: 30.44 GiB used: 8.57 GiB (28.1%)
Processes: 572 Power: uptime: 15m wakeups: 0 Init: systemd v: 256
target: graphical (5) default: graphical
Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 19
Compilers: N/A Shell: Bash v: 5.2.32 running-in: ptyxis-agent inxi: 3.3.37