Is there a way to get dynamic boost working for nvidia rtx 3070 mobile?

Computer Type: laptop Intel NUC X15 Laptop Kit LAPKC71F https://ark.intel.com/content/www/us…-lapkc71f.html

GPU: RTX 3070 max-q

CPU:
Intel® Core™ i7-11800H Processor (24M Cache, up to 4.60 GHz) , no overclock

Motherboard: Intel LAPKC71F Motherboard , lastest bios KCTGL 357 0044

RAM: Crucial 16GB ddr4 3200mhz x2, no overclock

PSU: laptop PSU

Operating System & Version: nobara 37 /modified fedora 37, upgrade

GPU Drivers: 525.105.17 linux 64bit, upgrade

Description of Problem:

the GPU is supposed to have three power limit modes, 80w, 100w and 125w. the extra 25w from 100w comes from dynamic boost. There is a physcal button that controls the power limit modes. And in windows 11 it can also be configured through laptop control software.

I checked that i satisfy all the conditions for dynamic boost and in windows 11 dynamic boost works and i get 125w easily. I cannot get higher than 100w in linux and i tested with 3dmark and rdr2 benchmarks they all throttle the power at 100w. on window 11 the power limit is 125w with firestrike 3dmark. I tried on both xorg 11 and wayland it doesnt work.

Troubleshooting: I have read https://download.nvidia.com/XFree86/…amicboost.html

I cannot follow the guide since i only have a nvdia-dbus.conf in /usr/share/dbus-1/system.d folder and i am not sure if its what i should move to /etc/dbus-1/system.d

the contents of .conf.

the service is running too.

$ systemctl --type=service --state=running | grep ‘nvidia-powerd.service’

nvidia-powerd.service loaded active running nvidia-powerd service

What should I do?

Also is dynamic boost for nvidia cards only for xorg 11? in wayland the DynamicBoostSupport isnt even there.

You said you are using nobara.
Also, the nvidia drivers you have are not the latest available from rpmfusion.

Even though they use fedora as the base, they do their own thing with the kernel and drivers so the best advice is to ask on the nobara site for assistance.