Solution 1: Via Wireless Setup Wizard
- Scroll down the top bar of the printer control panel and then tap on the Settings icon.
- Then you need to select the tap on Network Setup.
- Next, go to the Wireless Settings option.
- After that, choose the Wireless Setup wizard.
- When it searches for the network, select your Wireless network from the list.
- Enter your wireless connection password, click OK, and wait for the connection to complete.
- At last a test document will be printed to see if the HP printer wireless setup is successful.
Solution 2: Via WPS Push Button
- Firstly, ensure that your printer supports the WPS push button mode. (Note- If your printer does not have the WPS push button, you can do it from the printer control panel with menus.)
- Now, confirm that your Wi-Fi router has a WPS button.
- When your HP printer does not have WPS push button mode, open the settings in the printer control panel. (Note: You can skip step 9 if the router has the WPS button.)
- Then tap on the Network Setup option.
- Next, you are required to navigate to Wireless Settings.
- Choose the Wi-Fi Protected Setup option.
- After that, you need to use the Push Button option.
- Then, select the Start option.
- Afterward, you should press and hold the Wi-Fi key for 3 seconds.
- In addition, press and hold the WPS button on your router for 3 to 5 seconds.
- Now, wait for the printer to connect until the Wi-Fi icon starts blinking or a “connected” message appears on the display.