Gnome Files (nautilus) crashes upon launching

Ask Fedora
,
1 
Fedora workstation version: 41

[sysadmin@localhost:/home/sysadmin]$ uname -r
6.11.7-300.fc41.x86_64

After I upgraded my Fedora from v40 to v41, when I try to open ‘Files’ (nautilus) GUI from gnome dock, it crashes.
To emulate MS Windows Explorer, I have configured the keyboard shortcut key as Super(Windows key)+E in Settings > Keyboard > Launchers.
So, when I type Super + E, it is supposed to open the Files GUI from Home folder (/home/sysadmin). This also crashes.

image
image467×237 8.43 KB

So, every time, the Files GUI crashes, I have to go to command line and kill nautilus like below because the above ‘Force Quit’ option hangs too.

[sysadmin@localhost:/home/sysadmin]$ ps -ef | grep nautilus
sysadmin    5337    2807  1 19:26 ?        00:00:01 /usr/bin/nautilus --gapplication-service
sysadmin    6340    4697  0 19:28 pts/0    00:00:00 grep --color=auto nautilus
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ kill -9 5337
[sysadmin@localhost:/home/sysadmin]$

My temporary workaround to open Files GUI:
Go to terminal and type nautilus or nautilus & (I don’t know which one is better) This will open Files without any issue.
In the terminal, I see the following error messages though. Could these messages give a hint on the root cause of this issue ?

[sysadmin@localhost:/home/sysadmin]$ nautilus &
[1] 6439
[sysadmin@localhost:/home/sysadmin]$ ** Message: 19:29:06.536: Connecting to org.freedesktop.Tracker3.Miner.Files

(org.gnome.Nautilus:6439): Gtk-WARNING **: 19:29:20.524: Attempting to store changes into '/home/sysadmin/.local/share/recently-used.xbel', but failed: Failed to rename file “/home/sysadmin/.local/share/recently-used.xbel.G6T4W2” to “/home/sysadmin/.local/share/recently-used.xbel”: g_rename() failed: Operation not permitted

(org.gnome.Nautilus:6439): Gtk-WARNING **: 19:29:20.524: Attempting to set the permissions of '/home/sysadmin/.local/share/recently-used.xbel', but failed: Operation not permitted

(org.gnome.Nautilus:6439): Gsk-WARNING **: 19:29:46.331: vkWaitForFences(): The logical or physical device has been lost. (VK_ERROR_DEVICE_LOST) (-4)
[sysadmin@localhost:/home/sysadmin]$

Anyone encountered a similair issue while launching gnome Files ? How can I troubleshoot this issue ?

2

Added f41

3

coredumpctl info run from the terminal right after Nautilus crashes might reveal some hints.

You could also try removing the files causing the warnings (after backing them up), and check if it fixes the issue:

cp ~/.local/share/recently-used.xbel* ~/Documents/backup
rm ~/.local/share/recently-used.xbel*
2 Likes
4

Even after another crash of gnome Files GUI, coredumpctl info only has info about another crash of VS Code from last night. Nothing about any crashes of gnome Files GUI at all, unfortunately.

PID: 5618 (code)
           UID: 1000 (sysadmin)
           GID: 1000 (sysadmin)
        Signal: 5 (TRAP)
     Timestamp: Mon 2024-11-18 00:16:11 CET (22h ago)
  Command Line: $'/usr/share/code/code /home/sysadmin/Documents/issue_with_gnome_files.txt'
    Executable: /usr/share/code/code
 Control Group: /user.slice/user-1000.slice/user@1000.service/app.slice/app-org.gnome.Terminal.slice/vte-spawn-667ac210-dcd2-4d65-b0b5-f5582f64c511.scope
          Unit: user@1000.service
     User Unit: vte-spawn-667ac210-dcd2-4d65-b0b5-f5582f64c511.scope
         Slice: user-1000.slice
     Owner UID: 1000 (sysadmin)
       Boot ID: 9cf0eda6e8764450b57f852c35e79773
    Machine ID: 1304a4e419554f6187c679a44d1c9666
      Hostname: localhost.localdomain
       Storage: /var/lib/systemd/coredump/core.code.1000.9cf0eda6e8764450b57f852c35e79773.5618.1731885371000000.zst (present)
  Size on Disk: 12.6M
       Message: Process 5618 (code) of user 1000 dumped core.
                
                Module libpcsclite_real.so.1 from rpm pcsc-lite-2.3.0-1.fc41.x86_64
                Module libpcsclite.so.1 from rpm pcsc-lite-2.3.0-1.fc41.x86_64
                Module legacy.so from rpm openssl-3.2.2-9.fc41.x86_64
                Module libcrypto.so.3 from rpm openssl-3.2.2-9.fc41.x86_64
                Module libeac.so.3 from rpm openpace-1.1.3-2.fc41.x86_64
                Module libopensc.so.11 from rpm opensc-0.25.1-5.fc41.x86_64
                Module opensc-pkcs11.so from rpm opensc-0.25.1-5.fc41.x86_64
                Module libtasn1.so.6 from rpm libtasn1-4.19.0-9.fc41.x86_64
         <Snipped for readability>

I tried removing ~/.local/share/recently-used.xbel* as you have suggested.
But, I couldn’t do it even after switching to root user and running rm -f

[sysadmin@localhost:/home/sysadmin]$ cp ~/.local/share/recently-used.xbel* /home/sysadmin/Documents/backup_files_crashing
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ rm ~/.local/share/recently-used.xbel*
rm: cannot remove '/home/sysadmin/.local/share/recently-used.xbel': Operation not permitted
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ sudo su -
[sudo] password for sysadmin: 
root@localhost:~# 
root@localhost:~# 
root@localhost:~# rm /home/sysadmin/.local/share/recently-used.xbel*
rm: remove regular empty file '/home/sysadmin/.local/share/recently-used.xbel'? yes
rm: cannot remove '/home/sysadmin/.local/share/recently-used.xbel': Operation not permitted
root@localhost:~# 
root@localhost:~# ls -l /home/sysadmin/.local/share/recently-used.xbel
-rw-rw-r--. 1 sysadmin sysadmin 0 May 23  2020 /home/sysadmin/.local/share/recently-used.xbel
root@localhost:~# 
root@localhost:~# 
root@localhost:~# 
root@localhost:~# rm -f /home/sysadmin/.local/share/recently-used.xbel
rm: cannot remove '/home/sysadmin/.local/share/recently-used.xbel': Operation not permitted
root@localhost:~#
5

What is the output of this command?
lsattr /home/sysadmin/.local/share/recently-used.xbel*

6

While providing the above, please also provide the output of:

ls -laZ ~/.local/share/recently-used.xbel*

One thing I’ve noticed is that on my systems there’s only owner access (-rw-------.) for this file, whereas on yours there’s group/others access too (-rw-rw-r--.). Generally user config files don’t get write access for user’s group.

Is this a system that has been upgraded several major versions, or maybe the home folder reused from older versions of Fedora (or even from other distros)? Or maybe needed to manually change permissions for some reason?

1 Like
7

Here are the requested outputs.
Yes, I purchased this HP Omen laptop back in October 2018. Ever since then, it has undergone several major version upgrades.

[sysadmin@localhost:/home/sysadmin]$ lsattr /home/sysadmin/.local/share/recently-used.xbel*
----i---------e------- /home/sysadmin/.local/share/recently-used.xbel
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ ls -laZ ~/.local/share/recently-used.xbel*
-rw-rw-r--. 1 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0 0 May 23  2020 /home/sysadmin/.local/share/recently-used.xbel
[sysadmin@localhost:/home/sysadmin]$
8

Try removing attributes with sudo chattr = ~/.local/share/recently-used.xbel, then remove the file.

2 Likes
9

I removed the file using the step you’ve suggested, and I restarted my laptop.
But the issue persists, i.e, Files GUI still crashes when I type Super + E or when I try to click on Files in Dock.

[sysadmin@localhost:/home/sysadmin]$ sudo chattr = ~/.local/share/recently-used.xbel
[sudo] password for sysadmin: 
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ ls -laZ ~/.local/share/recently-used.xbel*
-rw-rw-r--. 1 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0 0 May 23  2020 /home/sysadmin/.local/share/recently-used.xbel
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ lsattr /home/sysadmin/.local/share/recently-used.xbel*
---------------------- /home/sysadmin/.local/share/recently-used.xbel
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ rm ~/.local/share/recently-used.xbel
[sysadmin@localhost:/home/sysadmin]$

But, now when I type nautilus & on the terminal, no more “Operation not permitted” warning messages printed on the terminal as posted above.

10

Do you have any relevant logs when Nautilus crashes when started from the dock?

1 Like
11

I captured the dmesg output after the crash. Since there is no timestamps for the messages printed, I don’t know if these messages are from before the crash occured.

I suspect something wrong with my NVIDIA graphics driver. I use the rpm fusion one. But, previously, I had used the proprietary NVIDID driver (the .run one).

Search for the terms taint or NVIDIA or graphics below.

[sysadmin@localhost:/home/sysadmin]$ sudo dmesg
[sudo] password for sysadmin: 
[    0.000000] Linux version 6.11.7-300.fc41.x86_64 (mockbuild@6c49ea81e72a4908b02fd96c22f92edf) (gcc (GCC) 14.2.1 20240912 (Red Hat 14.2.1-3), GNU ld version 2.43.1-2.fc41) #1 SMP PREEMPT_DYNAMIC Fri Nov  8 19:23:10 UTC 2024
[    0.000000] Command line: BOOT_IMAGE=(hd1,gpt6)/vmlinuz-6.11.7-300.fc41.x86_64 root=/dev/mapper/fedora_rootvg-root ro rd.lvm.lv=fedora_rootvg/root rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau
[    0.000000] BIOS-provided physical RAM map:

<Several lines removed due to word limit for a post>


[\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.196455] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.196457] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196458] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.196461] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.196462] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196486] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.196489] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.196491] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.196492] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.196495] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.196496] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.197437] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.197440] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.197442] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.197444] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.197446] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.197448] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.198381] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.198384] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.198386] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.198388] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.198390] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.198392] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.199334] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.199337] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.199338] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.199340] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.199342] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.199344] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.200284] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20240322/dswload2-326)
[    0.200286] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240322/psobject-220)
[    0.200288] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.200290] ACPI BIOS Error (bug): Failure creating named object 
[    1.113709] Key type big_key registered
[    1.113716] Key type trusted registered
[    1.133141] Key type encrypted registered
[    1.134196] integrity: Loading X.509 certificate: UEFI:db
[    1.134224] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
[    1.134225] integrity: Loading X.509 certificate: UEFI:db
[    1.134241] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.134242] integrity: Loading X.509 certificate: UEFI:db
[    1.134257] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.135549] Loading compiled-in module X.509 certificates
[    1.135928] Loaded X.509 cert 'Fedora kernel signing key: b1778a166a3101aed0795ef30060bd14670a8a8c'
[    1.135931] ima: Allocated hash algorithm: sha256
[    1.152073] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.216908] ima: No architecture policies found
[    1.216978] evm: Initialising EVM extended attributes:
[    1.216981] evm: security.selinux
[    1.216984] evm: security.SMACK64 (disabled)
[    1.216986] evm: security.SMACK64EXEC (disabled)
[    1.216988] evm: security.SMACK64TRANSMUTE (disabled)
[    1.216991] evm: security.SMACK64MMAP (disabled)
[    1.216993] evm: security.apparmor (disabled)
[    1.216995] evm: security.ima
[    1.216997] evm: security.capability
[    1.216999] evm: HMAC attrs: 0x1
[    1.320553] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.365826] alg: No test for 842 (842-scomp)
[    1.365987] alg: No test for 842 (842-generic)
[    1.388367] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.389222] ata5.00: ATA-10: SD Ultra 3D 2TB, 530309WD, max UDMA/133
[    1.389348] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.389943] ata5.00: Features: Dev-Sleep
[    1.391058] ata5.00: configured for UDMA/133
[    1.401182] ahci 0000:00:17.0: port does not support device sleep
[    1.401633] scsi 4:0:0:0: Direct-Access     ATA      SD Ultra 3D 2TB  09WD PQ: 0 ANSI: 5
[    1.402600] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    1.402807] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.402830] sd 4:0:0:0: [sda] Write Protect is off
[    1.402839] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.402864] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.402908] sd 4:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.431901]  sda: sda1 sda2 sda3
[    1.432205] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.451651] usb 1-2: New USB device found, idVendor=17ef, idProduct=60a9, bcdDevice= 1.09
[    1.451655] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.451657] usb 1-2: Product: Lenovo Essential Wireless Keyboard and Mouse Combo
[    1.451658] usb 1-2: Manufacturer: Primax
[    1.454975] input: Primax Lenovo Essential Wireless Keyboard and Mouse Combo as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:17EF:60A9.0001/input/input6
[    1.506895] hid-generic 0003:17EF:60A9.0001: input,hidraw0: USB HID v1.11 Keyboard [Primax Lenovo Essential Wireless Keyboard and Mouse Combo] on usb-0000:00:14.0-2/input0
[    1.508437] input: Primax Lenovo Essential Wireless Keyboard and Mouse Combo as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:17EF:60A9.0002/input/input7
[    1.508722] hid-generic 0003:17EF:60A9.0002: input,hidraw1: USB HID v1.11 Mouse [Primax Lenovo Essential Wireless Keyboard and Mouse Combo] on usb-0000:00:14.0-2/input1
[    1.509688] input: Primax Lenovo Essential Wireless Keyboard and Mouse Combo as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:17EF:60A9.0003/input/input8
[    1.509781] PM:   Magic number: 0:958:348
[    1.509851] memory memory194: hash matches
[    1.512973] RAS: Correctable Errors collector initialized.
[    1.524232] clk: Disabling unused clocks
[    1.524233] PM: genpd: Disabling unused power domains
[    1.525293] Freeing unused decrypted memory: 2028K
[    1.525825] Freeing unused kernel image (initmem) memory: 4776K
[    1.525939] Write protecting the kernel read-only data: 36864k
[    1.526352] Freeing unused kernel image (rodata/data gap) memory: 348K
[    1.561590] hid-generic 0003:17EF:60A9.0003: input,hidraw2: USB HID v1.11 Device [Primax Lenovo Essential Wireless Keyboard and Mouse Combo] on usb-0000:00:14.0-2/input2
[    1.562515] hid-generic 0003:17EF:60A9.0004: hiddev96,hidraw3: USB HID v1.11 Device [Primax Lenovo Essential Wireless Keyboard and Mouse Combo] on usb-0000:00:14.0-2/input3
[    1.566938] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.566940] x86/mm: Checking user space page tables
[    1.605292] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.605309] Run /init as init process
[    1.605311]   with arguments:
[    1.605312]     /init
[    1.605313]     rhgb
[    1.605314]   with environment:
[    1.605315]     HOME=/
[    1.605316]     TERM=linux
[    1.605316]     BOOT_IMAGE=(hd1,gpt6)/vmlinuz-6.11.7-300.fc41.x86_64
[    1.605328] tsc: Refined TSC clocksource calibration: 2207.999 MHz
[    1.605332] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b75da7f, max_idle_ns: 440795296082 ns
[    1.605392] clocksource: Switched to clocksource tsc
[    1.678571] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.694918] systemd[1]: Successfully made /usr/ read-only.
[    1.695047] systemd[1]: systemd 256.7-1.fc41 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
[    1.695052] systemd[1]: Detected architecture x86-64.
[    1.695054] systemd[1]: Running in initrd.
[    1.695224] systemd[1]: Hostname set to <localhost.localdomain>.
[    1.757750] systemd[1]: Queued start job for default target initrd.target.
[    1.775047] systemd[1]: Expecting device dev-mapper-fedora_rootvg\x2droot.device - /dev/mapper/fedora_rootvg-root...
[    1.775103] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
[    1.775125] systemd[1]: Reached target slices.target - Slice Units.
[    1.775137] systemd[1]: Reached target swap.target - Swaps.
[    1.775148] systemd[1]: Reached target timers.target - Timer Units.
[    1.775233] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    1.775310] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[    1.775382] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    1.775435] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    1.775448] systemd[1]: Reached target sockets.target - Socket Units.
[    1.776358] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    1.776393] systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
[    1.777969] systemd[1]: Starting systemd-journald.service - Journal Service...
[    1.778633] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    1.778658] systemd[1]: systemd-pcrphase-initrd.service - TPM PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.779200] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[    1.779867] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.

[    2.376338]  nvme0n1: p1 p2 p3 p4 p5 p6 p7
[    2.830339] EXT4-fs (dm-0): mounted filesystem 4f403c4a-fc50-46dd-aa47-176fecb7acab ro with ordered data mode. Quota mode: none.
[    3.157321] systemd-journald[331]: Received SIGTERM from PID 1 (systemd).
[    3.250517] audit: type=1404 audit(1732051213.658:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[    3.328050] SELinux:  policy capability network_peer_controls=1
[    3.328055] SELinux:  policy capability open_perms=1
[    3.328056] SELinux:  policy capability extended_socket_class=1
[    3.328057] SELinux:  policy capability always_check_network=0
[    3.328058] SELinux:  policy capability cgroup_seclabel=1
[    3.328059] SELinux:  policy capability nnp_nosuid_transition=1
[    3.328059] SELinux:  policy capability genfs_seclabel_symlinks=1
[    3.328060] SELinux:  policy capability ioctl_skip_cloexec=0
[    3.328061] SELinux:  policy capability userspace_initial_context=0
[    3.367358] audit: type=1403 audit(1732051213.775:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
[    3.368550] systemd[1]: Successfully loaded SELinux policy in 118.584ms.
[    3.375368] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    3.405376] systemd[1]: Relabeled /dev/, /dev/shm/, /run/ in 27.616ms.
[    3.410139] systemd[1]: systemd 256.8-1.fc41 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
[    3.410144] systemd[1]: Detected architecture x86-64.
[    3.539209] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    3.687592] systemd-sysv-generator[753]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[    3.687597] systemd-sysv-generator[753]: Please update package to include a native systemd unit file.

[    3.995216] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.995380] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    3.996404] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.996574] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.

[    4.655868] snd_hda_intel 0000:01:00.1: Disabling MSI
[    4.655872] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.655879] snd_hda_intel 0000:01:00.1: Applying patch firmware 'hda-jack-retask.fw'
[    4.745673] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    4.745744] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    4.745802] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    4.745859] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17

[    5.879572] audit: type=1130 audit(1732047616.288:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@dm_multipath comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.879576] audit: type=1131 audit(1732047616.288:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@dm_multipath comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.879969] audit: type=1130 audit(1732047616.288:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@loop comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.879974] audit: type=1131 audit(1732047616.288:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@loop comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.886008] nvidia: loading out-of-tree module taints kernel.
[    5.886016] nvidia: module license 'NVIDIA' taints kernel.
[    5.886017] Disabling lock debugging due to kernel taint
[    5.886019] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    5.886020] nvidia: module license taints kernel.
[    6.346678] nvidia-nvlink: Nvlink Core is being initialized, major device number 511

[    6.348063] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[    6.360578] Bluetooth: hci0: Waiting for firmware download to complete
[    6.361546] Bluetooth: hci0: Firmware loaded in 1446676 usecs
[    6.361583] Bluetooth: hci0: Waiting for device to boot
[    6.375575] Bluetooth: hci0: Device booted in 13685 usecs
[    6.375591] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    6.376631] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[    6.378612] Bluetooth: hci0: Applying Intel DDC parameters completed
[    6.379603] Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
[    6.381648] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[    6.387086] audit: type=1130 audit(1732047616.795:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.393200] audit: type=1130 audit(1732047616.801:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.498346] audit: type=1130 audit(1732047616.906:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.502279] audit: type=1334 audit(1732047616.910:67): prog-id=34 op=LOAD
[    6.567522] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  565.57.01  Thu Oct 10 12:29:05 UTC 2024
[    6.586326] RPC: Registered named UNIX socket transport module.
[    6.586330] RPC: Registered udp transport module.
[    6.586331] RPC: Registered tcp transport module.
[    6.586332] RPC: Registered tcp-with-tls transport module.
[    6.586333] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.652753] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[    6.820843] nvidia-uvm: Loaded the UVM driver, major device number 509.
[    6.877669] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  565.57.01  Thu Oct 10 12:02:00 UTC 2024
[    6.887562] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    6.913993] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20240322/nsarguments-61)
[    6.974895] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.974897] Bluetooth: BNEP filters: protocol multicast
[    6.974900] Bluetooth: BNEP socket layer initialized
[    6.976179] Bluetooth: MGMT ver 1.23
[    7.558268] NET: Registered PF_QIPCRTR protocol family
[    7.599425] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 1
[    7.610994] nvidia 0000:01:00.0: vgaarb: deactivate vga console
[    7.615873] fbcon: nvidia-drmdrmfb (fb0) is primary device
[    7.615877] fbcon: Deferring console take-over
[    7.615880] nvidia 0000:01:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
[    7.849284] vboxdrv: Found 12 processor cores/threads
[    7.865628] vboxdrv: TSC mode is Invariant, tentative frequency 2207997739 Hz
[    7.865632] vboxdrv: Successfully loaded version 7.0.22 r165102 (interface 0x00330004)
[    7.952498] Generic FE-GE Realtek PHY r8169-0-3c00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-3c00:00, irq=MAC)
[    8.074207] VBoxNetFlt: Successfully started.
[    8.077848] VBoxNetAdp: Successfully started.
[    8.118359] r8169 0000:3c:00.0 eno1: Link is Down
[    8.209982] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
[    8.312670] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    8.810167] ahci 0000:00:17.0: port does not support device sleep
[    8.977080] ahci 0000:00:17.0: port does not support device sleep
[    9.007308] ahci 0000:00:17.0: port does not support device sleep
[   11.982009] wlo1: authenticate with e4:c3:2a:11:be:ad (local address=f6:40:df:15:14:79)
[   11.982949] wlo1: send auth to e4:c3:2a:11:be:ad (try 1/3)
[   12.033920] wlo1: authenticated
[   12.035580] wlo1: associate with e4:c3:2a:11:be:ad (try 1/3)
[   12.037024] wlo1: RX AssocResp from e4:c3:2a:11:be:ad (capab=0x1011 status=0 aid=2)
[   12.040819] wlo1: associated
[   14.328067] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   18.888856] rfkill: input handler disabled
[   19.383479] Bluetooth: RFCOMM TTY layer initialized
[   19.383486] Bluetooth: RFCOMM socket layer initialized
[   19.383491] Bluetooth: RFCOMM ver 1.11
[   28.711850] rfkill: input handler enabled
[   32.230029] rfkill: input handler disabled
[   70.460420] NVRM: GPU at PCI:0000:01:00: GPU-d77dddbc-4d4f-4e62-6bb3-271c3d25c62c
[   70.460424] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 0: WIDTH CT Violation. Coordinates: (0x3c0, 0x0)
[   70.460432] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x500420=0x80000010 0x500434=0x3c0 0x500438=0x1100 0x50043c=0x0
[   70.460446] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 1: WIDTH CT Violation. Coordinates: (0x3c8, 0x0)
[   70.460451] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x508420=0x80000010 0x508434=0x3c8 0x508438=0x1100 0x50843c=0x0
[   70.460464] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 2: WIDTH CT Violation. Coordinates: (0x3d0, 0x0)
[   70.460470] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x510420=0x80000010 0x510434=0x3d0 0x510438=0x1100 0x51043c=0x0
[   70.460484] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 3: WIDTH CT Violation. Coordinates: (0x3d8, 0x0)
[   70.460489] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x518420=0x80000010 0x518434=0x3d8 0x518438=0x1100 0x51843c=0x0
[   70.460751] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ChID 002d, Class 0000c197, Offset 00002394, Data 00000000
[   93.929242] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[  595.289624] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 0: WIDTH CT Violation. Coordinates: (0x3c0, 0x0)
[  595.289638] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x500420=0x80000010 0x500434=0x3c0 0x500438=0x1100 0x50043c=0x0
[  595.289653] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 1: WIDTH CT Violation. Coordinates: (0x3c8, 0x0)
[  595.289659] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x508420=0x80000010 0x508434=0x3c8 0x508438=0x1100 0x50843c=0x0
[  595.289673] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 2: WIDTH CT Violation. Coordinates: (0x3d0, 0x0)
[  595.289679] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x510420=0x80000010 0x510434=0x3d0 0x510438=0x1100 0x51043c=0x0
[  595.289693] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 3: WIDTH CT Violation. Coordinates: (0x3d8, 0x0)
[  595.289699] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x518420=0x80000010 0x518434=0x3d8 0x518438=0x1100 0x51843c=0x0
[  595.289988] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ChID 002d, Class 0000c197, Offset 00002394, Data 00000000
[ 1167.089992] input: EDIFIER MS50A (AVRCP) as /devices/virtual/input/input20
[ 2018.322461] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 0: WIDTH CT Violation. Coordinates: (0x3c0, 0x0)
[ 2018.322479] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x500420=0x80000010 0x500434=0x3c0 0x500438=0x1100 0x50043c=0x0
[ 2018.322499] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 1: WIDTH CT Violation. Coordinates: (0x3c8, 0x0)
[ 2018.322512] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x508420=0x80000010 0x508434=0x3c8 0x508438=0x1100 0x50843c=0x0
[ 2018.322536] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 2: WIDTH CT Violation. Coordinates: (0x3d0, 0x0)
[ 2018.322553] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x510420=0x80000010 0x510434=0x3d0 0x510438=0x1100 0x51043c=0x0
[ 2018.322576] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 3: WIDTH CT Violation. Coordinates: (0x3d8, 0x0)
[ 2018.322593] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x518420=0x80000010 0x518434=0x3d8 0x518438=0x1100 0x51843c=0x0
[ 2018.322999] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ChID 0035, Class 0000c197, Offset 00002390, Data 00000000
[ 3579.219588] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 0: WIDTH CT Violation. Coordinates: (0x3c0, 0x0)
[ 3579.219607] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x500420=0x80000010 0x500434=0x3c0 0x500438=0x1100 0x50043c=0x0
[ 3579.219624] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 1: WIDTH CT Violation. Coordinates: (0x3c8, 0x0)
[ 3579.219630] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x508420=0x80000010 0x508434=0x3c8 0x508438=0x1100 0x50843c=0x0
[ 3579.219644] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 2: WIDTH CT Violation. Coordinates: (0x3d0, 0x0)
[ 3579.219649] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x510420=0x80000010 0x510434=0x3d0 0x510438=0x1100 0x51043c=0x0
[ 3579.219666] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 3: WIDTH CT Violation. Coordinates: (0x3d8, 0x0)
[ 3579.219675] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x518420=0x80000010 0x518434=0x3d8 0x518438=0x1100 0x51843c=0x0
[ 3579.220080] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ChID 002d, Class 0000c197, Offset 0000214c, Data 0000001e
[ 3890.421117] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 0: WIDTH CT Violation. Coordinates: (0x3c0, 0x0)
[ 3890.421132] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x500420=0x80000010 0x500434=0x3c0 0x500438=0x1100 0x50043c=0x0
[ 3890.421152] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 1: WIDTH CT Violation. Coordinates: (0x3c8, 0x0)
[ 3890.421160] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x508420=0x80000010 0x508434=0x3c8 0x508438=0x1100 0x50843c=0x0
[ 3890.421179] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 2: WIDTH CT Violation. Coordinates: (0x3d0, 0x0)
[ 3890.421188] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x510420=0x80000010 0x510434=0x3d0 0x510438=0x1100 0x51043c=0x0
[ 3890.421207] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception on GPC 3: WIDTH CT Violation. Coordinates: (0x3d8, 0x0)
[ 3890.421215] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ESR 0x518420=0x80000010 0x518434=0x3d8 0x518438=0x1100 0x51843c=0x0
[ 3890.421610] NVRM: Xid (PCI:0000:01:00): 13, pid='<unknown>', name=<unknown>, Graphics Exception: ChID 002c, Class 0000c197, Offset 00002390, Data 00000000
[sysadmin@localhost:/home/sysadmin]$
12

IMO the point is also: why such file had the immutable flag? Maybe there are other files with wrong permissions, selinux contexts or attributes? Who knows.

If you create a new user and you login with it, does the problem occur anyway?

3 Likes
13

Please check with coredumpctl list if there are crashes of nautilus caught. If so, please post the output of coredumpctl info <pid> (replace <pid> with the id of the process).

Could you also post the output of ls -laZ ~/.local/share/nautilus/?

1 Like
14

1.
coredumpctl list only seem to report a crash of nautilus that happened 10 days back (10-November-2024, Sunday).
But there have been several crashes of nautilus before this date and after.

[sysadmin@localhost:/home/sysadmin]$ coredumpctl list
TIME                          PID  UID  GID SIG     COREFILE EXE                                    SIZE
Fri 2024-11-01 13:35:15 CET 71644 1000 1000 SIGSEGV missing  /usr/libexec/dleyna-renderer-service      -
Fri 2024-11-01 20:29:15 CET 37864 1000 1000 SIGSEGV missing  /usr/libexec/dleyna-renderer-service      -
Sat 2024-11-02 17:18:47 CET  4980 1000 1000 SIGSEGV missing  /usr/libexec/dleyna-renderer-service      -
Sat 2024-11-02 18:01:44 CET 26698 1000 1000 SIGSEGV missing  /usr/libexec/dleyna-renderer-service      -
Sun 2024-11-10 09:04:54 CET  3616 1000 1000 SIGABRT present  /usr/bin/gnome-software                 33M
Sun 2024-11-10 10:49:03 CET 30327 1000 1000 SIGSEGV present  /usr/libexec/dleyna-renderer-service 449.8K
Sun 2024-11-10 11:14:06 CET 37951 1000 1000 SIGSEGV present  /usr/bin/nautilus                      8.8M
Sun 2024-11-10 18:50:45 CET 61094 1000 1000 SIGSEGV present  /usr/libexec/dleyna-renderer-service   454K
Tue 2024-11-12 21:29:31 CET 25698 1000 1000 SIGSEGV present  /usr/libexec/dleyna-renderer-service 449.6K
Sun 2024-11-17 19:55:00 CET  2846 1000 1000 SIGSEGV present  /usr/libexec/Xorg                      4.2M
Mon 2024-11-18 00:16:13 CET  5618 1000 1000 SIGTRAP present  /usr/share/code/code                  12.6M
[sysadmin@localhost:/home/sysadmin]$

2.About coredumpctl info <pid>

When nautilus was hung, I captured its PID like below.
It just shows “No coredumps found.”

[sysadmin@localhost:/home/sysadmin]$ ps -ef | grep nautilus
sysadmin   28323    2893  0 09:20 ?        00:00:03 /usr/bin/nautilus --gapplication-service
sysadmin   30028   27238  0 09:26 pts/0    00:00:00 grep --color=auto nautilus
[sysadmin@localhost:/home/sysadmin]$ 
[sysadmin@localhost:/home/sysadmin]$ coredumpctl info 28323
No coredumps found.
[sysadmin@localhost:/home/sysadmin]$ After nautilus was killed using 'Force quit' button (shown above)
[sysadmin@localhost:/home/sysadmin]$ coredumpctl info 28323
No coredumps found.
[sysadmin@localhost:/home/sysadmin]$

3. Output of ls -laZ ~/.local/share/nautilus/

[sysadmin@localhost:/home/sysadmin]$ ls -laZ ~/.local/share/nautilus/
total 16
drwxr-xr-x.  4 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0 4096 Nov 12  2020 .
drwx------. 50 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0 4096 Nov 19 21:51 ..
drwx------.  2 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0 4096 May 22  2019 scripts
drwxr-xr-x.  2 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0 4096 Nov 20 09:19 tags
-rw-r--r--.  1 sysadmin sysadmin unconfined_u:object_r:data_home_t:s0    0 Nov 12  2020 tracker2-migration-complete
[sysadmin@localhost:/home/sysadmin]$
15

I ran out of ideas. It is suspicious why that file ~/.local/share/recently-used.xbel had those attributes, as well as group write access. Given that the system has been upgraded for several years already, something might have gone wrong at some point (that file seems to have last mod time from 2020).

You should try @alciregi 's suggestion above regarding creation of a new user.

1 Like
16

Ok, Thanks ! I will try creating a new user.

So, how can I create a user similair to sysadmin user ?

For example, in /home/sysadmin directory, I have a directory named from D_Drive (reminiscent of my old Windows days) which has all my personal files ( 800+ GB)

Lets say I create a new user named johndoe.

johndoe user should have all privileges as sysadmin user like the ability to sudo to root. How can I grant this sudo privilege to johndoe user ?

As for /home/sysadmin/D_Drive, I think I can log in as root (sudo su - ) and then move it to /home/johndoe/

17

The idea was to first check if the issue gets replicated with a new user or not. The user can be created from GNOME’s Settings → System → Users → Add User, and check the Administrator option.

If you’d like to go a step further, and migrate your existing data (D_Drive folder), you can do that from CLI as suggested by you, and running chown/chmod recursively, if needed.

2 Likes
18

I created a new admin user as you have suggested. Logged in and tested.

But, the issue persists with the new user too. :unamused:

19

The same output from lsattr ~/.local/share/recently-used.xbel and of ls -laZ ~/.local/share/recently-used.xbel?

20

I found what triggers this issue. Wish I found this earlier.

I use an external monitor for this laptop.

At home, I have another laptop too - my work laptop

So, instead of physically removing and attaching HDMI cables from each laptop to the monitor, I bought the below HDMI Bi-directional switcher (of Ugreen make).
After attaching the HDMI cables from both of my laptops to this HDMI switcher, I can just press the button on the switcher to switch between the input displays from my personal laptop or work laptop.

For both of my laptops, I was using the Mirror option rather than Join option shown below.

image
image730×592 9.83 KB

Now, I did a quick test. When I switch on my personal laptop (Fedora) and display comes up only in the laptop screen, first. In this mode, the gnome Files GUI does not crash !

But, when I press the button in HDMI Bi-directional switcher and mirrors my Fedora laptop’s screen to the external monitor; the issue comes back !!! Even if I use Join option for the display, Files GUI crashes. But, I did not have this issue before I upgraded to Fedora 41.

Answer to Mike’s question: I logged in as adminman (the new user) and ran the commands. Here are the outputs.

adminman@localhost:~$ lsattr ~/.local/share/recently-used.xbel
--------------e------- /home/adminman/.local/share/recently-used.xbel
adminman@localhost:~$ 
adminman@localhost:~$ 
adminman@localhost:~$ 
adminman@localhost:~$ ls -laZ ~/.local/share/recently-used.xbel
-rw-------. 1 adminman adminman unconfined_u:object_r:data_home_t:s0 218 Nov 20 14:15 /home/adminman/.local/share/recently-used.xbel
adminman@localhost:~$ 
adminman@localhost:~$
1 Like