Problem
Blinking cursor in top right corner when going to suspend, but if I press the power button again it turns off. But when trying to wake up it is getting stuck on the black screen with the same blinking cursor
nvidia-suspend.service, resume.service and hibernate.service are enabled
Cause
Not yet known.
inxi -Fzxx
System:
Kernel: 6.17.8-300.fc43.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
Desktop: GNOME v: 49.1 tk: GTK v: 3.24.51 wm: gnome-shell dm: GDM
Distro: Fedora Linux 43 (Workstation Edition)
Machine:
Type: Laptop System: LENOVO product: 82RB v: Legion 5 15IAH7H
serial: <superuser required> Chassis: type: 10 v: Legion 5 15IAH7H
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: NO DPK serial: <superuser required>
part-nu: LENOVO_MT_82RB_BU_idea_FM_Legion 5 15IAH7H UEFI: LENOVO v: J2CN46WW
date: 09/28/2022
Battery:
ID-1: BAT0 charge: 68.4 Wh (95%) condition: 72/80 Wh (90%) volts: 15.99
min: 15.44 model: BYD L21B4PC0 serial: <filter> charging:
status: not charging cycles: 101
CPU:
Info: 14-core (6-mt/8-st) model: 12th Gen Intel Core i7-12700H bits: 64
type: MST AMCP arch: Alder Lake rev: 3 cache: L1: 1.2 MiB L2: 11.5 MiB
L3: 24 MiB
Speed (MHz): avg: 400 min/max: 400/4600:4700:3500 cores: 1: 400 2: 400
3: 400 4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400
13: 400 14: 400 15: 400 16: 400 17: 400 18: 400 19: 400 20: 400
bogomips: 107520
Flags-basic: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Lenovo
driver: i915 v: kernel arch: Xe ports: active: eDP-1 empty: DP-1,DP-2
bus-ID: 00:02.0 chip-ID: 8086:46a6
Device-2: NVIDIA GA104M [Geforce RTX 3070 Ti Laptop GPU] vendor: Lenovo
driver: nvidia v: 580.105.08 arch: Ampere pcie: speed: 2.5 GT/s lanes: 8
ports: active: HDMI-A-1 empty: DP-3,DP-4,eDP-2 bus-ID: 01:00.0
chip-ID: 10de:24e0
Display: wayland server: Xwayland v: 24.1.9 compositor: gnome-shell
driver: gpu: i915,nv_platform,nvidia,nvidia-nvswitch display-ID: 0
Monitor-1: HDMI-A-1 model: Samsung LC27G5xT res: 2560x1440 dpi: 109
diag: 685mm (27")
Monitor-2: eDP-1 model: BOE Display 0x0a2d res: 2560x1440 dpi: 189
diag: 395mm (15.5")
API: OpenGL v: 4.6 vendor: intel mesa v: 25.2.6 glx-v: 1.4 es-v: 3.2
direct-render: yes renderer: Mesa Intel Iris Xe Graphics (ADL GT2)
device-ID: 8086:46a6 display-ID: :0.0
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Info: Tools: api: glxinfo gpu: nvidia-settings x11: xdriinfo, xdpyinfo,
xprop, xrandr
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:51c8
Device-2: NVIDIA GA104 High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel pcie: speed: 2.5 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 10de:228b
API: ALSA v: k6.17.8-300.fc43.x86_64 status: kernel-api
Server-1: PipeWire v: 1.4.9 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:51f0
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1
port: 3000 bus-ID: 34:00.0 chip-ID: 10ec:8168
IF: enp52s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 bus-ID: 3-10:8 chip-ID: 8087:0033
Report: btmgmt ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: <filter> bt-v: 5.4 lmp-v: 13
Drives:
Local Storage: total: 1.16 TiB used: 92.15 GiB (7.7%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVL21T0HCLR-00BL2
size: 953.87 GiB speed: 63.2 Gb/s lanes: 4 serial: <filter> temp: 43.9 C
ID-2: /dev/sdb model: SSD 256GB size: 238.47 GiB type: USB rev: 3.2
spd: 5 Gb/s lanes: 1 serial: <filter>
Partition:
ID-1: / size: 326.17 GiB used: 7.71 GiB (2.4%) fs: btrfs dev: /dev/nvme0n1p7
ID-2: /boot size: 1.9 GiB used: 630.3 MiB (32.4%) fs: ext4
dev: /dev/nvme0n1p6
ID-3: /boot/efi size: 507 MiB used: 426.4 MiB (84.1%) fs: vfat
dev: /dev/nvme0n1p1
ID-4: /home size: 326.17 GiB used: 7.71 GiB (2.4%) fs: btrfs
dev: /dev/nvme0n1p7
Swap:
ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 47.2 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.33 GiB used: 6.12 GiB (39.9%)
Processes: 1140 Power: uptime: 25m wakeups: 0 Init: systemd v: 258
default: graphical
Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 7 Compilers:
gcc: 15.2.1 Shell: Bash v: 5.3.0 running-in: ptyxis-agent inxi: 3.3.39
dnf list --installed *nvidia*
Installed packages
akmod-nvidia.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
kmod-nvidia-6.17.8-300.fc43.x86_64.x86_64 3:580.105.08-1.fc43 @commandline
nvidia-gpu-firmware.noarch 20251021-1.fc43 0e44b8838a064239bd0106e9c9253add
nvidia-modprobe.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
nvidia-settings.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-cuda-libs.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-kmodsrc.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-libs.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-power.x86_64 3:580.105.08-1.fc43 rpmfusion-nonfree-nvidia-driver