Hi i can’t configure fedora 44 + kismet +rtl433 scan option or rtl433 on 868 MHz and 1090 MHz.
dont detect RTL433 ADSB
with sudo detect RTL433 but don’t see aeroplanes 1090 MHz air-radio-transponders
or on 868 MHz “water meter” Wireless-Mbus
INFO: Registered PHY handler ‘NrfMousejack’ as ID 5
ERROR: Tried to re-register duplicate alert FLIPPERZERO
INFO: Registered PHY handler ‘BTLE’ as ID 6
INFO: Registered PHY handler ‘METER’ as ID 7
INFO: Indexing ADSB ICAO db
INFO: Completed indexing ADSB ICAO db, 341068 lines 6822 indexes
INFO: Registered PHY handler ‘ADSB’ as ID 8
INFO: Registered PHY handler ‘802.15.4’ as ID 9
INFO: Registered PHY handler ‘RADIATION’ as ID 10
INFO: (HTTPD) Could not read session data file, skipping loading saved
sessions.
INFO: Serving static file content from /usr/share/kismet/httpd/
INFO: Enabling channel hopping by default on sources which support channel
control.
INFO: Setting default channel hop rate to 5/sec
INFO: Enabling channel list splitting on sources which share the same list
of channels
INFO: Enabling channel list shuffling to optimize overlaps
INFO: Sources will be re-opened if they encounter an error
INFO: Saving datasources to the Kismet database log every 30 seconds
INFO: Launching remote capture server on 127.0.0.1 3501
/bin/bash: /usr/bin/kismet_cap_sdr_rtl433: Brak dostępu
INFO: Opened kismetdb log file ‘.//Kismet-20260516-21-06-31-1.kismet’
INFO: Saving packets to the Kismet database log.
INFO: GPS track will be logged to the Kismet logfile
INFO: (GPS) Connecting to GPSD on localhost:2947
INFO: Starting Kismet web server…
INFO: HTTP server listening on 0.0.0.0:2501
ERROR: Data source ‘rtl433-0 / rtl433-0:args=-f 868950000 -s
2500k,type=rtl433’ (‘rtl433-0’) encountered an error: IPC
connection closed
ALERT: SOURCEERROR Source rtl433-0 (00000000-0000-0000-0000-000000000000)
has encountered an error (IPC connection closed) Kismet will
attempt to re-open the source in 5 seconds. (1 failures)
ERROR: Source rtl433-0 (00000000-0000-0000-0000-000000000000) has
encountered an error (IPC connection closed) Kismet will attempt to
re-open the source in 5 seconds. (1 failures)
ERROR: Kismet external interface got command frame with invalid size
INFO: (GPS) Connected to gpsd server ::1:2947
INFO: (GPS) Connected to a JSON-enabled GPSD (3.27.5), enabling JSON mode
INFO: Could not open system plugin directory (/usr/lib64/kismet/),
skipping: No such file or directory
INFO: Did not find a user plugin directory (/home/felix/.kismet//plugins/),
skipping: No such file or directory
^C
*** KISMET IS SHUTTING DOWN ***
Shutting down plugins…
WARNING: Kismet changes the configuration of network devices.
In most cases you will need to restart networking for
your interface (varies per distribution and OS), but
typically one of:
sudo service networking restart
sudo /etc/init.d/networking restart
or
nmcli device set [device] managed true
Kismet exiting.
EXITING: Signal service thread complete.
INFO: Attempting to re-open source rtl433-0
FATAL: Datasource helper (rtl433) failed, could not process incoming control packet.
ERROR: Data source ‘rtl433-0 / rtl433-0:args=-f 868950000 -s
2500k,type=rtl433’ (‘rtl433-0’) encountered an error: kismet_cap_sdr
_rtl433 could not find rtl_433 binary in path. Make sure it is
installed.
ALERT: SOURCEERROR Source rtl433-0 (00000000-0000-0000-0000-000000000000)
has encountered an error (kismet_cap_sdr_rtl433 could not find
rtl_433 binary in path. Make sure it is installed.) Kismet will
attempt to re-open the source in 5 seconds. (5 failures)
ERROR: Source rtl433-0 (00000000-0000-0000-0000-000000000000) has
encountered an error (kismet_cap_sdr_rtl433 could not find rtl_433
binary in path. Make sure it is installed.) Kismet will attempt to
re-open the source in 5 seconds. (5 failures)
INFO: Attempting to re-open source rtl433-0
ALERT: SOURCEOPEN Source rtl433-0 (5E600813-0000-0000-0000-000080EF07D5)
successfully re-opened
lsusb
GPS-USB > working fine
Bus 001 Device 006: ID 1546:01a7 U-Blox AG [u-blox 7]
RTL-USB > not working
Bus 001 Device 008: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bluetooth > working fine
Bus 003 Device 002: ID 0bda:c123 Realtek Semiconductor Corp. Bluetooth Radio
Wifi work.
kismet.x86_64 0.0.2025.09.R1-3.fc44 fedora
rtl-433.i686 25.12-1.20260106git8d92cdd.fc44 fedora
rtl-433.x86_64 25.12-1.20260106git8d92cdd.fc44 fedora
7.0.8-200.fc44.x86_64
wmbusmeters detects water-meters messages but encrypted that’s mean RTL radio working with wmbusmeters.x86_64 1.20.0-1.fc44 fedora
wmbusmeters rtlwmbus:868.95M
Started config rtlwmbus[00000001] listening on none using fq 868.95M
No meters configured. Printing id:s of all telegrams heard!
Received telegram from: 02710073
manufacturer: (APA) Apator, Poland (0x601)
type: Water meter (0x07) encrypted
ver: 0x05
device: rtlwmbus[00000001]
rssi: 148 dBm
link mode: t1
driver: apator162
Received telegram from: 02525695
manufacturer: (APA) Apator, Poland (0x601)
type: Water meter (0x07) encrypted
ver: 0x05
device: rtlwmbus[00000001]
rssi: 91 dBm
link mode: t1
driver: apator162