Fedora 34 Webcam not detected on HP 14-R011LA

Hi, i have an HP 14-R011LA, it come with an integrated webcam, in Windows it work without problems, when i installed Fedora 34, the OS doesn’t detect the webcam,

lspci and lsusb don’t show any webcam, and /dev/video0 doesn’t exist

I tried with modprobe uvcvideo without results

[root@potosme wesker]# lsusb
Bus 001 Device 008: ID 0cf3:3121 Qualcomm Atheros Communications 
Bus 001 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@potosme wesker]# lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.5 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 6 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
09:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
[root@potosme wesker]# dmesg | egrep "(usb|USB)"
[    0.665128] ACPI: bus type USB registered
[    0.665146] usbcore: registered new interface driver usbfs
[    0.665153] usbcore: registered new interface driver hub
[    0.665160] usbcore: registered new device driver usb
[    0.775219] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6d0 took 11757 usecs
[    0.813989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.814154] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.824140] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.824186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    0.824189] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824191] usb usb1: Product: EHCI Host Controller
[    0.824192] usb usb1: Manufacturer: Linux 5.13.15-200.fc34.x86_64 ehci_hcd
[    0.824193] usb usb1: SerialNumber: 0000:00:1d.0
[    0.824330] hub 1-0:1.0: USB hub found
[    0.824481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.824495] uhci_hcd: USB Universal Host Controller Interface driver
[    0.824676] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.825873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    0.825876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.825877] usb usb2: Product: xHCI Host Controller
[    0.825878] usb usb2: Manufacturer: Linux 5.13.15-200.fc34.x86_64 xhci-hcd
[    0.825880] usb usb2: SerialNumber: 0000:00:14.0
[    0.825986] hub 2-0:1.0: USB hub found
[    0.827288] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.827291] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.827325] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[    0.827327] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.827329] usb usb3: Product: xHCI Host Controller
[    0.827330] usb usb3: Manufacturer: Linux 5.13.15-200.fc34.x86_64 xhci-hcd
[    0.827331] usb usb3: SerialNumber: 0000:00:14.0
[    0.827433] hub 3-0:1.0: USB hub found
[    0.827750] usbcore: registered new interface driver usbserial_generic
[    0.827755] usbserial: USB Serial support registered for generic
[    0.845832] usbcore: registered new interface driver usbhid
[    0.845835] usbhid: USB HID core driver
[    1.066146] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.192507] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    1.192512] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.192776] hub 1-1:1.0: USB hub found
[    1.469161] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    1.548834] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3121, bcdDevice= 0.01
[    1.548840] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.615160] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[    1.680144] usb 1-1.5: device descriptor read/64, error -32
[    1.855132] usb 1-1.5: device descriptor read/64, error -32
[    2.022144] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[    2.087186] usb 1-1.5: device descriptor read/64, error -32
[    2.255133] usb 1-1.5: device descriptor read/64, error -32
[    2.357223] usb 1-1-port5: attempt power cycle
[    2.937189] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
[    3.349220] usb 1-1.5: device not accepting address 6, error -32
[    3.413194] usb 1-1.5: new full-speed USB device number 7 using ehci-pci
[    3.829243] usb 1-1.5: device not accepting address 7, error -32
[    3.829421] usb 1-1-port5: unable to enumerate USB device
[    6.667700] usbcore: registered new interface driver btusb
[    6.815416] usbcore: registered new interface driver ath3k
[    6.970078] usb 1-1.4: USB disconnect, device number 3
[    7.151129] usb 1-1.4: new full-speed USB device number 8 using ehci-pci
[   12.487224] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3121, bcdDevice= 0.02
[   12.487231] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   22.040853] usb 1-1.5: new full-speed USB device number 9 using ehci-pci
[   22.110664] usb 1-1.5: device descriptor read/64, error -32
[   22.293934] usb 1-1.5: device descriptor read/64, error -32
[   22.476132] usb 1-1.5: new full-speed USB device number 10 using ehci-pci
[   22.545961] usb 1-1.5: device descriptor read/64, error -32
[   22.730314] usb 1-1.5: device descriptor read/64, error -32
[   22.842842] usb 1-1-port5: attempt power cycle
[   23.475431] usb 1-1.5: new full-speed USB device number 11 using ehci-pci
[   23.924844] usb 1-1.5: device not accepting address 11, error -32
[   23.994667] usb 1-1.5: new full-speed USB device number 12 using ehci-pci
[   24.448466] usb 1-1.5: device not accepting address 12, error -32
[   24.448759] usb 1-1-port5: unable to enumerate USB device
[   29.120242] usb 1-1.5: new full-speed USB device number 13 using ehci-pci
[   29.186808] usb 1-1.5: device descriptor read/64, error -32
[   29.360252] usb 1-1.5: device descriptor read/64, error -32
[   29.530237] usb 1-1.5: new full-speed USB device number 14 using ehci-pci
[   29.597238] usb 1-1.5: device descriptor read/64, error -32
[   29.769228] usb 1-1.5: device descriptor read/64, error -32
[   29.871290] usb 1-1-port5: attempt power cycle
[   30.451210] usb 1-1.5: new full-speed USB device number 15 using ehci-pci
[   30.863210] usb 1-1.5: device not accepting address 15, error -32
[   30.927203] usb 1-1.5: new full-speed USB device number 16 using ehci-pci
[   31.343202] usb 1-1.5: device not accepting address 16, error -32
[   31.343284] usb 1-1-port5: unable to enumerate USB device
[  108.320581] usb 1-1.5: new full-speed USB device number 17 using ehci-pci
[  108.385578] usb 1-1.5: device descriptor read/64, error -32
[  108.557604] usb 1-1.5: device descriptor read/64, error -32
[  108.725577] usb 1-1.5: new full-speed USB device number 18 using ehci-pci
[  108.790600] usb 1-1.5: device descriptor read/64, error -32
[  108.959561] usb 1-1.5: device descriptor read/64, error -32
[  109.061725] usb 1-1-port5: attempt power cycle
[  109.641559] usb 1-1.5: new full-speed USB device number 19 using ehci-pci
[  110.053651] usb 1-1.5: device not accepting address 19, error -32
[  110.117652] usb 1-1.5: new full-speed USB device number 20 using ehci-pci
[  110.533635] usb 1-1.5: device not accepting address 20, error -32
[  110.533906] usb 1-1-port5: unable to enumerate USB device

Regards

How did you install F34? With the live ISO of the Workstation?
Did you check it also within the Live mode?

Please give more infos about the webcam it selves and also the kernel version you tested.

I used a live ISO of Workstation

I have just done it and i got the same problem

I am using this kernel

# uname -a
Linux potosme 5.13.15-200.fc34.x86_64 #1 SMP Wed Sep 8 15:51:46 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

I’ll try to make a Windows installation to make tests and get more information about that driver.

1 Like