Fedora 31, nivdia drivers tripple monitor setup issues (default no HDMI-out)

If been using a triple monitor setup for some time now. (fedora ~25)
One internal, one, usb-c-to-hdmi and one hdmi monitor.
This worked fine until the upgrade to 31. It seems to be a driver and/or xrand issue.

I can’t get the hdmi-direct monitor to ‘connect’.
I can get is to work bij using a xorg.conf file but then the other 2 don’t display anything.

Not sure how to tackle this, can anybody help me fix this?

Thanks!

INFO:

nvidia-smi:
Mon Nov 11 15:13:22 2019
±----------------------------------------------------------------------------+
| NVIDIA-SMI 435.21 Driver Version: 435.21 CUDA Version: 10.1 |
|-------------------------------±---------------------±---------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1050 Off | 00000000:01:00.0 Off | N/A |
| N/A 36C P8 N/A / N/A | 47MiB / 2000MiB | 0% Default |
±------------------------------±---------------------±---------------------+

±----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1541 G /usr/libexec/Xorg 22MiB |
| 0 3379 G /usr/libexec/Xorg 22MiB |
±----------------------------------------------------------------------------+

xrandr -q
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00*+ 59.97 59.96 59.93 40.00
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1680x1050 59.88
1280x1024 60.02
1440x900 59.90
1280x960 60.00
1280x720 60.00 50.00 59.94
1152x720 59.97
1024x768 60.00
800x600 60.32 56.25
720x576 50.00
720x480 60.00 59.94
640x480 66.67 60.00 59.94
HDMI-1 disconnected (normal left inverted right x axis y axis)

Been tinkering and found a workaround for now:

The problem with the fedora 31 upgrade is the intel-card also used in my laptop.
It seems the laptop screen only uses the intel card now.

So i use them both by enabling both in X11:
This is my: /etc/X11/xorg.conf

Section “Device”
Identifier “Device1”
Driver “nvidia”
VendorName “NVIDIA Corporation”
EndSection
Section “Device”
Identifier “Device0”
Driver “intel”
VendorName “Intel Corporation”
EndSection

1 Like

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.