Fedodar 39 not connecting to external monitor


I have a problem to connect to an external monitor via HDMI or USB-C connector. I use Lenovo Carbon X1 generation 11 laptop.

Below is the output from inxi -Fxz command

  Kernel: 6.7.3-200.fc39.x86_64 arch: x86_64 bits: 64 compiler: gcc
    v: 2.40-14.fc39 Desktop: GNOME v: 45.3 Distro: Fedora release 39 (Thirty
  Type: Laptop System: LENOVO product: 21HM006FCK v: ThinkPad X1 Carbon Gen 11
    serial: <filter>
  Mobo: LENOVO model: 21HM006FCK v: SDK0T76530 WIN serial: <filter>
    UEFI: LENOVO v: N3XET48W (1.23 ) date: 11/01/2023
  ID-1: BAT0 charge: 53.4 Wh (94.5%) condition: 56.5/57.0 Wh (99.2%)
    volts: 17.2 min: 15.4 model: Sunwoda 5B10W13975 status: discharging
  Info: 10-core (2-mt/8-st) model: 13th Gen Intel Core i7-1355U bits: 64
    type: MST AMCP arch: Raptor Lake rev: 3 cache: L1: 928 KiB L2: 6.5 MiB
    L3: 12 MiB
  Speed (MHz): avg: 493 high: 834 min/max: 400/5000:3700 cores: 1: 515
    2: 400 3: 691 4: 400 5: 471 6: 416 7: 400 8: 591 9: 834 10: 400 11: 400
    12: 400 bogomips: 62668
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: Lenovo driver: N/A
    arch: Gen-13 bus-ID: 00:02.0
  Display: server: X.Org v: 1.20.14 with: Xwayland v: 23.2.4 driver: X:
    loaded: modesetting,vesa unloaded: fbdev dri: swrast gpu: N/A
    resolution: 1920x1200~60Hz
  API: OpenGL v: 4.5 vendor: mesa v: 23.3.5 glx-v: 1.4 direct-render: yes
    renderer: llvmpipe (LLVM 17.0.6 256 bits)
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
  Device-1: Intel vendor: Lenovo driver: N/A bus-ID: 00:05.0
  Device-2: Intel Raptor Lake-P/U/H cAVS vendor: Lenovo
    driver: sof-audio-pci-intel-tgl bus-ID: 00:1f.3
  API: ALSA v: k6.7.3-200.fc39.x86_64 status: kernel-api
  Server-1: JACK v: 1.9.22 status: off
  Server-2: PipeWire v: 1.0.3 status: n/a (root, process)
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3
  IF: wlp0s20f3 state: up mac: <filter>
  Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB
    bus-ID: 2-1.4:7
  IF: enp0s13f0u1u4c2 state: down mac: <filter>
  IF-ID-1: docker0 state: down mac: <filter>
  IF-ID-2: wwan0 state: down mac: N/A
  Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB
    bus-ID: 3-10:6
  Report: btmgmt ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 5.3
    lmp-v: 12
  Local Storage: total: 953.87 GiB used: 38.75 GiB (4.1%)
  ID-1: /dev/nvme0n1 vendor: Western Digital model: WD PC SN810
    SDCQNRY-1T00-1201 size: 953.87 GiB temp: 32.9 C
  ID-1: / size: 952.28 GiB used: 38.49 GiB (4.0%) fs: btrfs
    dev: /dev/nvme0n1p3
  ID-2: /boot size: 973.4 MiB used: 246 MiB (25.3%) fs: ext4
    dev: /dev/nvme0n1p2
  ID-3: /boot/efi size: 598.8 MiB used: 19.1 MiB (3.2%) fs: vfat
    dev: /dev/nvme0n1p1
  ID-4: /home size: 952.28 GiB used: 38.49 GiB (4.0%) fs: btrfs
    dev: /dev/nvme0n1p3
  ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) dev: /dev/zram0
  System Temperatures: cpu: 46.0 C mobo: N/A
  Fan Speeds (rpm): fan-1: 0 fan-2: 0
  Processes: 452 Uptime: 50m Memory: total: 32 GiB note: est.
  available: 31.01 GiB used: 4.8 GiB (15.5%) Init: systemd
  target: graphical (5) Compilers: gcc: 13.2.1 Packages: 14 note: see --rpm
  Shell: Sudo v: 1.9.15p5 inxi: 3.3.31

Can you please help me solve this issue?


1 Like

3 posts were split to a new topic: Unable to connect to external monitor