External nvidia gpu installation

I want to install my GTX 1050 GPU in an external box which connects to my laptop with a thunderbolt cable. Without the GPU this works fine as a docking station supporting ethernet and an external drive. I have the instructions to install the appropriate NVIDIA drivers on a desktop, but I want the laptop to work as well without the external box connected, and it seems from some of the postings that I might unintentionally delete the laptop’s graphics drivers. What is the correct procedure?
(running Fed 29).

It depends on what GPU(s) your notebook is using right now (and with which drivers for NVidia one, if it has such a card).

As far as I understand, if your notebook has and uses integrated Intel (or AMD Radeon) video card, then it’s drivers won’t be deleted and when external GPU isn’t connected – notebook will continue to use integrated one. I think (don’t know) you’ll have to reboot for the switch to take place.

If you notebook has and uses built-in Nvidia GPU – then it’ll try to use the same NVidia proprietary drivers for both built-in and external GPU. If both are supported by the same driver version – then you shouldn’t have any problem. If built-in one is an old/legacy card and need an older version of the driver – then it won’t work. And you can’t have two versions of proprietary NVidia drivers on you system.

Also if you have an Optimus notebook (with Intel and NVidia videocards supporting dynamic switching) – that can be a problem, as far as I know.

In any case If you decide to install proprietary Nvidia drivers – please install them from rpmfusion (in case you don’t already know this):

https://rpmfusion.org/Howto/NVIDIA

1 Like

I’ve installed an external GPU GTX 1050 in an OMEN box linked by thunderbolt to Lenovo T480 laptop. I have a BENQ monitor plugged into the GPU using HDMI and a Dell monitor with displayport. I am trying to use the rpmfusion Nvidia drivers and have loaded them according to Howto/NVIDIA - RPM Fusion. I was expecting some glitches and found them. Basic problem is that only the laptop screen displays anything.
In the Xorg.0.log files I found a warning that my GPU was not enabled, and modified the /etc/X11/xorg.conf.d/nvidia.conf file to fix this; this was accepted and the devices appear in the Xorg log file but the GPU-connected screens are still black. An additional monitor works when connected to the laptop HDMI. Also if I boot with the nouveau driver ( enable secure boot) all three screens appear. Not clear that I benefit from the GPU in this case though.
I would really appreciate your help. It is clear from the forum that others have solved similar problems but I am missing information about the nvidia configuration options.
The diagnostic output I think is relevant are (apologies for the length)

Blockquote

olin@lenolin:~/Desktop$ cat xrandr.out
Screen 0: minimum 320 x 200, current 5440 x 1200, maximum 16384 x 16384
eDP-1 connected 1920x1080+3520+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920x1080 60.03*+ 60.01 59.97 59.96 59.93 48.03
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
DVI-D-1-1 connected (normal left inverted right x axis y axis)
1600x1200 60.00 +
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
HDMI-1-3 disconnected (normal left inverted right x axis y axis)
DP-1-3 disconnected (normal left inverted right x axis y axis)
HDMI-1-4 connected primary (normal left inverted right x axis y axis)
1920x1080 60.00 + 50.00 59.94
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
1024x576 60.01
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
1280x1024 (0x55) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1024x768 (0x66) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x75) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
640x480 (0x82) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
1680x1050 (0x4e) 146.250MHz -HSync +VSync
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.29KHz
v: height 1050 start 1053 end 1059 total 1089 clock 59.95Hz
1280x960 (0x58) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1280x800 (0x5f) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
Providers: number : 2
Provider 0: id: 0x47 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 5 associated providers: 1 name:modesetting
Provider 1: id: 0x1c1 cap: 0x2, Sink Output crtcs: 4 outputs: 4 associated providers: 1 name:modesetting

The config file
<
This file is provided by xorg-x11-drv-nvidia mod AO
#Do not edit

Section “OutputClass”
Identifier “nvidia”
MatchDriver “nvidia-drm”
Driver “nvidia”
Option “AllowEmptyInitialConfiguration”
Option “AllowExternalGpus”
Option “SLI” “Auto”
Option “BaseMosaic” “on”
EndSection

Section “ServerLayout”
Identifier “layout”
Option “AllowNVIDIAGPUScreens”
EndSection

the log file

Blockquote
Protocol Version 11, Revision 0
[ 12.915] Build Operating System: 5.0.6-200.fc29.x86_64
[ 12.915] Current Operating System: Linux lenolin.triumf.ca 5.7.11-100.fc31.x
86_64 #1 SMP Wed Jul 29 18:17:53 UTC 2020 x86_64
[ 12.915] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.7.11-100.fc31.
x86_64 root=/dev/mapper/fedora_lenolin-root ro resume=/dev/mapper/fedora_lenolin
-swap rd.lvm.lv=fedora_lenolin/root rd.lvm.lv=fedora_lenolin/swap rhgb quiet rd.
driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1
[ 12.915] Build Date: 25 November 2019 12:00:00AM
[ 12.915] Build ID: xorg-x11-server 1.20.6-1.fc31
[ 12.915] Current version of pixman: 0.38.4
[ 12.915] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.915] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.915] (==) Log file: “/var/log/Xorg.0.log”, Time: Sun Aug 9 13:53:03 202
0
[ 12.916] (==) Using config directory: “/etc/X11/xorg.conf.d”
[ 12.916] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 12.917] (==) ServerLayout “layout”
[ 12.917] (==) No screen section available. Using defaults.
[ 12.917] (
) |–>Screen “Default Screen Section” (0)
[ 12.917] (**) | |–>Monitor “”
[ 12.918] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 12.918] (==) Automatically adding devices
[ 12.918] (==) Automatically enabling devices
[ 12.918] (==) Automatically adding GPU devices
[ 12.918] (==) Automatically binding GPU devices
[ 12.918] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12.918] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 12.918] (==) ModulePath set to “/usr/lib64/xorg/modules”
[ 12.918] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.918] (II) Loader magic: 0x55f154935e20
[ 12.918] (II) Module ABI versions:
[ 12.918] X.Org ANSI C Emulation: 0.4
[ 12.918] X.Org Video Driver: 24.0
[ 12.918] X.Org XInput driver : 24.1
[ 12.918] X.Org Server Extension : 10.0
[ 12.919] (++) using VT number 1

[ 12.919] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 12.920] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.922] (–) PCI:*(0@0:2:0) 8086:5917:17aa:225d rev 7, Mem @ 0xe7000000/16777216, 0xc0000000/268435456, I/O @ 0x0000e000/64, BIOS @
0x???/131072
[ 12.922] (II) LoadModule: “glx”
[ 12.925] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 12.930] (II) Module glx: vendor=“X.Org Foundation”
[ 12.930] compiled for 1.20.6, module version = 1.0.0
[ 12.930] ABI class: X.Org Server Extension, version 10.0
[ 12.930] (==) Matched modesetting as autoconfigured driver 0
[ 12.930] (==) Matched fbdev as autoconfigured driver 1
[ 12.930] (==) Matched vesa as autoconfigured driver 2
[ 12.931] (==) Assigned the driver to the xf86ConfigLayout
[ 12.931] (II) LoadModule: “modesetting”
[ 12.931] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 12.932] (II) Module modesetting: vendor=“X.Org Foundation”
[ 12.932] compiled for 1.20.6, module version = 1.20.6
[ 12.932] Module class: X.Org Video Driver
[ 12.932] ABI class: X.Org Video Driver, version 24.0
[ 12.932] (II) LoadModule: “fbdev”
[ 12.932] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 12.932] (II) Module fbdev: vendor=“X.Org Foundation”
[ 12.932] compiled for 1.20.5, module version = 0.5.0
[ 12.932] Module class: X.Org Video Driver
[ 12.932] ABI class: X.Org Video Driver, version 24.0
[ 12.932] (II) LoadModule: “vesa”
12.932] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 12.933] (II) Module vesa: vendor=“X.Org Foundation”
[ 12.933] compiled for 1.20.5, module version = 2.4.0
[ 12.933] Module class: X.Org Video Driver
[ 12.933] ABI class: X.Org Video Driver, version 24.0
[ 12.933] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12.933] (II) FBDEV: driver for framebuffer: fbdev
[ 12.933] (II) VESA: driver for VESA chipsets: vesa
[ 12.933] (II) modeset(0): using drv /dev/dri/card0
[ 12.933] (WW) Falling back to old probe method for fbdev
[ 12.933] (II) Loading sub module “fbdevhw”
[ 12.933] (II) LoadModule: “fbdevhw”
[ 12.933] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 12.934] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 12.934] compiled for 1.20.6, module version = 0.0.2
[ 12.934] ABI class: X.Org Video Driver, version 24.0
[ 12.934] (II) modeset(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
[ 12.934] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 12.934] (==) modeset(0): RGB weight 888
[ 12.934] (==) modeset(0): Default visual is TrueColor
[ 12.934] (II) Loading sub module “glamoregl”
[ 12.934] (II) LoadModule: “glamoregl”
[ 12.934] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 12.940] (II) Module glamoregl: vendor=“X.Org Foundation”
[ 12.940] compiled for 1.20.6, module version = 1.0.1
[ 12.940] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.032] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) UHD Graphics 620 (Kabylake GT2)
[ 13.032] (II) modeset(0): glamor initialized
[ 13.032] (II) modeset(0): Output eDP-1 has no monitor section
[ 13.032] (II) modeset(0): Output DP-1 has no monitor section
[ 13.141] (II) modeset(0): Output HDMI-1 has no monitor section
[ 13.141] (II) modeset(0): Output DP-2 has no monitor section
[ 13.145] (II) modeset(0): Output HDMI-2 has no monitor section
[ 13.146] (II) modeset(0): EDID for output eDP-1
[ 13.146] (II) modeset(0): Manufacturer: AUO Model: 243d Serial#: 0
[ 13.146] (II) modeset(0): Year: 2016 Week: 0
[ 13.146] (II) modeset(0): EDID Version: 1.4
[ 13.146] (II) modeset(0): Digital Display Input
[ 13.146] (II) modeset(0): 6 bits per channel
[ 13.146] (II) modeset(0): Digital interface is DisplayPort
[ 13.146] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 13.146] (II) modeset(0): Gamma: 2.20
[ 13.146] (II) modeset(0): No DPMS capabilities specified
[ 13.146] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 13.146] (II) modeset(0): First detailed timing is preferred mode
[ 13.146] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 13.146] (II) modeset(0): redX: 0.568 redY: 0.342 greenX: 0.344 greenY: 0.580
[ 13.146] (II) modeset(0): blueX: 0.158 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 13.146] (II) modeset(0): Manufacturer’s mask: 0
[ 13.146] (II) modeset(0): Supported detailed timing:
[ 13.146] (II) modeset(0): clock: 149.8 MHz Image Size: 309 x 173 mm
[ 13.146] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2228 h_border: 0
[ 13.146] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1120 v_border: 0
[ 13.146] (II) modeset(0): Supported detailed timing:
[ 13.146] (II) modeset(0): clock: 119.8 MHz Image Size: 309 x 173 mm
[ 13.146] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2228 h_border: 0
[ 13.146] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1120 v_border: 0
[ 13.146] (II) modeset(0): AUO
[ 13.146] (II) modeset(0): B140HAN02.4
[ 13.146] (II) modeset(0): EDID (in hex):
[ 13.146] (II) modeset(0): 00ffffffffffff0006af3d2400000000
[ 13.146] (II) modeset(0): 001a0104951f117802a2b59157589428
[ 13.146] (II) modeset(0): 1c505400000001010101010101010101
[ 13.146] (II) modeset(0): 010101010101843a8034713828403064
[ 13.146] (II) modeset(0): 310035ad10000018d02e803471382840
[ 13.146] (II) modeset(0): 3064310035ad10000018000000fe0041
[ 13.146] (II) modeset(0): 554f0a202020202020202020000000fe
[ 13.146] (II) modeset(0): 004231343048414e30322e34200a00e4
[ 13.146] (II) modeset(0): Printing probed modes for output eDP-1
13.146] (II) modeset(0): Modeline "1920x1080"x60.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 13.146] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.
2 kHz d)
[ 13.146] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.
2 kHz d)
… omit some lines
13.147] (II) modeset(0): EDID for output DP-1
[ 13.256] (II) modeset(0): EDID for output HDMI-1
[ 13.256] (II) modeset(0): EDID for output DP-2
[ 13.260] (II) modeset(0): EDID for output HDMI-2
[ 13.260] (II) modeset(0): Output eDP-1 connected
[ 13.260] (II) modeset(0): Output DP-1 disconnected
[ 13.260] (II) modeset(0): Output HDMI-1 disconnected
[ 13.260] (II) modeset(0): Output DP-2 disconnected
[ 13.260] (II) modeset(0): Output HDMI-2 disconnected
[ 13.260] (II) modeset(0): Using exact sizes for initial modes
[ 13.260] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 13.260] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.260] (==) modeset(0): DPI set to (96, 96)
[ 13.260] (II) Loading sub module “fb”
[ 13.260] (II) LoadModule: “fb”
[ 13.260] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 13.262] (II) Module fb: vendor=“X.Org Foundation”
[ 13.262] compiled for 1.20.6, module version = 1.0.0
13.262] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.262] (II) UnloadModule: “fbdev”
[ 13.262] (II) Unloading fbdev
[ 13.262] (II) UnloadSubModule: “fbdevhw”
[ 13.262] (II) Unloading fbdevhw
[ 13.262] (II) UnloadModule: “vesa”
[ 13.262] (II) Unloading vesa
[ 13.268] (==) modeset(0): Backing store enabled
[ 13.268] (==) modeset(0): Silken mouse enabled
[ 13.340] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 13.340] (==) modeset(0): DPMS enabled
[ 13.340] (II) modeset(0): [DRI2] Setup complete
[ 13.340] (II) modeset(0): [DRI2] DRI driver: i965
[ 13.340] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 13.340] (II) Initializing extension Generic Event Extension
[ 13.340] (II) Initializing extension SHAPE
[ 13.340] (II) Initializing extension MIT-SHM
[ 13.340] (II) Initializing extension XInputExtension
[ 13.341] (II) Initializing extension XTEST
[ 13.341] (II) Initializing extension BIG-REQUESTS
[ 13.341] (II) Initializing extension SYNC
[ 13.341] (II) Initializing extension XKEYBOARD
[ 13.341] (II) Initializing extension XC-MISC
[ 13.341] (II) Initializing extension XFIXES
[ 13.341] (II) Initializing extension RENDER
[ 13.341] (II) Initializing extension RANDR
[ 13.342] (II) Initializing extension COMPOSITE
[ 13.342] (II) Initializing extension DAMAGE
[ 13.342] (II) Initializing extension MIT-SCREEN-SAVER
[ 13.342] (II) Initializing extension DOUBLE-BUFFER
[ 13.342] (II) Initializing extension RECORD
[ 13.342] (II) Initializing extension DPMS
[ 13.342] (II) Initializing extension Present
[ 13.342] (II) Initializing extension DRI3
[ 13.342] (II) Initializing extension X-Resource
13.343] (II) Initializing extension XVideo
[ 13.343] (II) Initializing extension XVideo-MotionCompensation
[ 13.343] (II) Initializing extension SELinux
[ 13.343] (II) SELinux: Disabled by boolean
[ 13.343] (II) Initializing extension GLX
[ 13.349] (II) AIGLX: Loaded and initialized i965
[ 13.349] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.349] (II) Initializing extension XFree86-VidModeExtension
[ 13.349] (II) Initializing extension XFree86-DGA
[ 13.349] (II) Initializing extension XFree86-DRI
[ 13.349] (II) Initializing extension DRI2
[ 13.356] (II) modeset(0): Damage tracking initialized
… some lines removed
18.121] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[ 18.121] (II) No input driver specified, ignoring this device.
[ 18.121] (II) This device may have been added with another device file.
[ 18.124] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event20)
[ 18.124] (II) No input driver specified, ignoring this device.
[ 18.124] (II) This device may have been added with another device file.
[ 18.125] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event23)
[ 18.125] (II) No input driver specified, ignoring this device.
[ 18.125] (II) This device may have been added with another device file.
[ 18.125] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event21)
[ 18.125] (II) No input driver specified, ignoring this device.
[ 18.125] (II) This device may have been added with another device file.
[ 18.127] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 18.127] (II) No input driver specified, ignoring this device.
[ 18.127] (II) This device may have been added with another device file.
[ 18.128] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event22)
[ 18.128] (II) No input driver specified, ignoring this device.
[ 18.128] (II) This device may have been added with another device file.
[ 18.130] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[ 18.130] (II) No input driver specified, ignoring this device.
[ 18.130] (II) This device may have been added with another device file.
[ 18.266] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 18.266] (II) modeset(0): Printing DDC gathered Modelines:
[ 18.266] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
18.266] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 18.497] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 18.497] (II) modeset(0): Printing DDC gathered Modelines:
[ 18.497] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 18.497] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 18.614] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:1d.0/0000:04:00.0/0000:05:01.0/0000:07:00.0/0000:08:01
.0/0000:09:00.0/drm/card1 /dev/dri/card1
[ 18.614] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 18.614] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.655] (II) LoadModule: “modesetting”
[ 18.656] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 18.656] (II) Module modesetting: vendor=“X.Org Foundation”
[ 18.656] compiled for 1.20.6, module version = 1.20.6
[ 18.656] Module class: X.Org Video Driver
[ 18.656] ABI class: X.Org Video Driver, version 24.0
[ 18.656] (II) UnloadModule: “modesetting”
[ 18.656] (II) Unloading modesetting
[ 18.656] (II) Failed to load module “modesetting” (already loaded, 0)
[ 18.696] (II) modeset(G0): using drv /dev/dri/card1
[ 18.697] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.697] (II) Applying OutputClass “nvidia” options to /dev/dri/card1
[ 18.697] (II) Applying OutputClass “nvidia” options to /dev/dri/card1
[ 18.697] (==) modeset(G0): RGB weight 888
[ 18.697] (==) modeset(G0): Default visual is TrueColor
[ 18.697] (II) Loading sub module “glamoregl”
[ 18.697] (II) LoadModule: “glamoregl”
[ 18.697] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 18.697] (II) Module glamoregl: vendor=“X.Org Foundation”
[ 18.697] compiled for 1.20.6, module version = 1.0.1
[ 18.697] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.925] (II) modeset(G0): Refusing to try glamor on llvmpipe
[ 18.926] (EE) modeset(G0): glamor initialization failed
[ 18.926] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[ 18.927] (II) modeset(G0): Double-buffered shadow updates: off
[ 18.947] (II) modeset(G0): Output DVI-D-1-1 has no monitor section
18.947] (II) modeset(G0): Output HDMI-1-3 has no monitor section
[ 18.947] (II) modeset(G0): Output DP-1-3 has no monitor section
[ 18.988] (II) modeset(G0): Output HDMI-1-4 has no monitor section
[ 19.048] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.048] () modeset(G0): Display dimensions: (310, 170) mm
[ 19.048] (
) modeset(G0): DPI set to (83, 114)
[ 19.048] (II) Loading sub module “fb”
[ 19.048] (II) LoadModule: “fb”
[ 19.049] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.049] (II) Module fb: vendor=“X.Org Foundation”
[ 19.049] compiled for 1.20.6, module version = 1.0.0
[ 19.049] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.049] (II) Loading sub module “shadow”
[ 19.049] (II) LoadModule: “shadow”
[ 19.049] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 19.049] (II) Module shadow: vendor=“X.Org Foundation”
[ 19.049] compiled for 1.20.6, module version = 1.1.0
[ 19.049] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.050] (==) modeset(G0): Backing store enabled
[ 19.050] (==) modeset(G0): Silken mouse enabled
[ 19.050] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 19.050] (==) modeset(G0): DPMS enabled
[ 19.050] (WW) modeset(G0): Option “AllowEmptyInitialConfiguration” is not used
[ 19.050] (WW) modeset(G0): Option “SLI” is not used
[ 19.050] (WW) modeset(G0): Option “BaseMosaic” is not used
[ 19.050] (WW) modeset(G0): Option “AllowExternalGpus” is not used
[ 19.051] (II) modeset(G0): Damage tracking initialized
… lines removed
[ 23.261] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 23.261] (II) modeset(0): Printing DDC gathered Modelines:
[ 23.261] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 23.261] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 23.822] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 23.822] (II) modeset(0): Printing DDC gathered Modelines:
[ 23.822] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 23.822] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 30.124] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 30.124] (II) modeset(0): Printing DDC gathered Modelines:
[ 30.124] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 30.124] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 30.682] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 30.682] (II) modeset(0): Printing DDC gathered Modelines:
[ 30.682] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 30.682] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 32.032] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 32.032] (II) modeset(0): Printing DDC gathered Modelines:
[ 32.032] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 32.032] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 32.146] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 32.146] (II) modeset(0): Printing DDC gathered Modelines:
[ 32.146] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 32.146] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)
[ 32.395] (II) modeset(0): Allocate new frame buffer 5440x1200 stride
[ 32.432] randr: failed to create shared pixmap
[ 32.433] (EE) modeset(G0): failed to set mode: No space left on device
[ 32.482] randr: failed to create shared pixmap
[ 32.482] (EE) modeset(G0): failed to set mode: No space left on device
next 4 lines repeat to end of file
[ 33.817] (II) modeset(0): EDID vendor “AUO”, prod id 9277
[ 33.817] (II) modeset(0): Printing DDC gathered Modelines:
[ 33.817] (II) modeset(0): Modeline "1920x1080"x0.0 149.80 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (67.2 kHz eP)
[ 33.817] (II) modeset(0): Modeline "1920x1080"x0.0 119.84 1920 1968 2068 2228 1080 1083 1084 1120 -hsync -vsync (53.8 kHz e)

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.