External monitor has no signal on a dual graphics card laptop

Ask Fedora
,
1

Hello everyone, today I connected a monitor to my notebook, but it’s not working properly.
My system is Fedora 41, kernel version 6.12.11-200.fc41.x86_64. I installed the NVIDIA driver version 565.77 following the guide at https://rpmfusion.org/Howto/NVIDIA.
The issues with the monitor are:

  • The monitor is detected in GNOME Settings, but there’s no signal on the monitor.
  • When I roll back to an older kernel, the NVIDIA driver fails to work properly, but the external monitor displays normally.

How can I resolve this issue? Any help is appreciated.
Below I’ll provide some additional information:

inxi -Fzxx 
System:
  Kernel: 6.12.11-200.fc41.x86_64 arch: x86_64 bits: 64 compiler: gcc
    v: 14.2.1
  Desktop: GNOME v: 47.4 tk: GTK v: 3.24.43 wm: gnome-shell dm: GDM
    Distro: Fedora Linux 41 (Workstation Edition)
Machine:
  Type: Laptop System: ASUSTeK product: Zenbook UX6404VV_UX6404VV v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX6404VV v: 1.0 serial: <superuser required>
    UEFI: American Megatrends LLC. v: UX6404VV.304 date: 11/02/2023
Battery:
  ID-1: BAT0 charge: 71.2 Wh (100.0%) condition: 71.2/76.0 Wh (93.7%)
    volts: 17.2 min: 15.9 model: ASUSTeK ASUS Battery serial: N/A status: full
  Device-1: hidpp_battery_0 model: Logitech G304 Lightspeed Wireless Gaming
    Mouse serial: <filter> charge: 100% (should be ignored)
    status: discharging
CPU:
  Info: 14-core (6-mt/8-st) model: 13th Gen Intel Core i9-13900H bits: 64
    type: MST AMCP arch: Raptor Lake rev: 2 cache: L1: 1.2 MiB L2: 11.5 MiB
    L3: 24 MiB
  Speed (MHz): avg: 608 min/max: 400/5200:5400:4100 cores: 1: 608 2: 608
    3: 608 4: 608 5: 608 6: 608 7: 608 8: 608 9: 608 10: 608 11: 608 12: 608
    13: 608 14: 608 15: 608 16: 608 17: 608 18: 608 19: 608 20: 608
    bogomips: 119807
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel arch: Xe ports: active: eDP-1 empty: DP-1,DP-2
    bus-ID: 00:02.0 chip-ID: 8086:a7a0
  Device-2: NVIDIA AD107M [GeForce RTX 4060 Max-Q / Mobile] vendor: ASUSTeK
    driver: nvidia v: 565.77 arch: Lovelace pcie: speed: 2.5 GT/s lanes: 8
    ports: active: none off: HDMI-A-1 empty: DP-3,eDP-2 bus-ID: 01:00.0
    chip-ID: 10de:28a0
  Device-3: Shinetech USB2.0 FHD UVC WebCam driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-9:4 chip-ID: 3277:0033
  Display: wayland server: Xwayland v: 24.1.5 compositor: gnome-shell
    driver: gpu: i915,nvidia,nvidia-nvswitch display-ID: 0
  Monitor-1: HDMI-A-1 model-id: RTK 0x2560 res: 2560x1600 dpi: 227
    diag: 337mm (13.26")
  Monitor-2: eDP-1 model: Samsung 0x4190 res: 2880x1800 dpi: 234
    diag: 368mm (14.5")
  API: OpenGL v: 4.6 vendor: intel mesa v: 24.3.4 glx-v: 1.4 es-v: 3.2
    direct-render: yes renderer: Mesa Intel Iris Xe Graphics (RPL-P)
    device-ID: 8086:a7a0 display-ID: :0.0
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
  Info: Tools: api: glxinfo gpu: nvidia-settings,nvidia-smi x11: xdriinfo,
    xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel Raptor Lake-P/U/H cAVS vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl bus-ID: 00:1f.3 chip-ID: 8086:51ca
  Device-2: NVIDIA AD107 High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: speed: 2.5 GT/s lanes: 8
    bus-ID: 01:00.1 chip-ID: 10de:22be
  Device-3: Comtrue SIMGOT DEW4X driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-1:2 chip-ID: 2fc6:f074
  API: ALSA v: k6.12.11-200.fc41.x86_64 status: kernel-api
  Server-1: JACK v: 1.9.22 status: off
  Server-2: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:51f1
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 bus-ID: 3-10:5 chip-ID: 8087:0033
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
    lmp-v: 12
Drives:
  Local Storage: total: 2.29 TiB used: 486.86 GiB (20.8%)
  ID-1: /dev/nvme0n1 vendor: Smart Modular Tech. model: SHPP41-2000GM
    size: 1.82 TiB speed: 63.2 Gb/s lanes: 4 serial: <filter> temp: 40.9 C
  ID-2: /dev/sda vendor: Yangtze Memory model: ZHITAI TiPlus5000 512GB
    size: 476.94 GiB type: USB rev: 3.2 spd: 10 Gb/s lanes: 1 serial: <filter>
Partition:
  ID-1: / size: 505.51 GiB used: 25.06 GiB (5.0%) fs: btrfs
    dev: /dev/nvme0n1p8
  ID-2: /boot/efi size: 511 MiB used: 19.3 MiB (3.8%) fs: vfat
    dev: /dev/nvme0n1p6
  ID-3: /home size: 505.51 GiB used: 25.06 GiB (5.0%) fs: btrfs
    dev: /dev/nvme0n1p8
Swap:
  ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p7
  ID-2: swap-2 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 40.2 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 32 GiB note: est. available: 30.97 GiB used: 5.74 GiB (18.5%)
  Processes: 521 Power: uptime: 5h 45m wakeups: 0 Init: systemd v: 256
    target: graphical (5) default: graphical
  Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 13
    Compilers: gcc: 14.2.1 Shell: Zsh v: 5.9 running-in: ptyxis-agent
    inxi: 3.3.37
dnf list installed '*nvidia*' 
Installed packages
akmod-nvidia.x86_64                                 3:565.77-1.fc41                  rpmfusion-nonfree-nvidia-
kmod-nvidia-6.12.11-200.fc41.x86_64.x86_64          3:565.77-1.fc41                  @commandline
nvidia-gpu-firmware.noarch                          20241210-1.fc41                  updates
nvidia-modprobe.x86_64                              3:565.77-1.fc41                  rpmfusion-nonfree-nvidia-
nvidia-persistenced.x86_64                          3:565.77-1.fc41                  rpmfusion-nonfree-nvidia-
nvidia-settings.x86_64                              3:565.77-1.fc41                  rpmfusion-nonfree-nvidia-
xorg-x11-drv-nvidia.x86_64                          3:565.77-3.fc41                  rpmfusion-nonfree-nvidia-
xorg-x11-drv-nvidia-cuda.x86_64                     3:565.77-3.fc41                  rpmfusion-nonfree-nvidia-
xorg-x11-drv-nvidia-cuda-libs.x86_64                3:565.77-3.fc41                  rpmfusion-nonfree-nvidia-
xorg-x11-drv-nvidia-kmodsrc.x86_64                  3:565.77-3.fc41                  rpmfusion-nonfree-nvidia-
xorg-x11-drv-nvidia-libs.x86_64                     3:565.77-3.fc41                  rpmfusion-nonfree-nvidia-
xorg-x11-drv-nvidia-power.x86_64                    3:565.77-3.fc41                  rpmfusion-nonfree-nvidia-
sudo dmesg | grep secure 
[    0.000000] secureboot: Secure boot disabled
[    0.014727] secureboot: Secure boot disabled
sudo lspci -v

00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris Xe Graphics] (rev 04) (prog-if 00 [VGA controller])
DeviceName: Second VGA
Subsystem: ASUSTeK Computer Inc. Device 3068
Flags: bus master, fast devsel, latency 0, IRQ 164, IOMMU group 0
Memory at 622c000000 (64-bit, non-prefetchable) [size=16M]
Memory at 4000000000 (64-bit, prefetchable) [size=256M]
I/O ports at 4000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express Root Complex Integrated Endpoint, IntMsgNum 0
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [100] Process Address Space ID (PASID)
Capabilities: [200] Address Translation Service (ATS)
Capabilities: [300] Page Request Interface (PRI)
Capabilities: [320] Single Root I/O Virtualization (SR-IOV)
Kernel driver in use: i915
Kernel modules: i915, xe

01:00.0 VGA compatible controller: NVIDIA Corporation AD107M [GeForce RTX 4060 Max-Q / Mobile] (rev a1) (prog-if 00 [VGA controller])
DeviceName: VGA
Subsystem: ASUSTeK Computer Inc. Device 3068
Flags: bus master, fast devsel, latency 0, IRQ 214, IOMMU group 18
Memory at 83000000 (32-bit, non-prefetchable) [size=16M]
Memory at 6000000000 (64-bit, prefetchable) [size=8G]
Memory at 6200000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at 84000000 [virtual] [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Legacy Endpoint, IntMsgNum 0
Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [250] Latency Tolerance Reporting Capabilities: [258] L1 PM Substates Capabilities: [128] Power Budgeting <?>
Capabilities: [420] Advanced Error Reporting
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] Secondary PCI Express Capabilities: [bb0] Physical Resizable BAR Capabilities: [c1c] Physical Layer 16.0 GT/s <?>
Capabilities: [d00] Lane Margining at the Receiver
Capabilities: [e00] Data Link Feature <?>
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia_drm, nvidia

nvidia-smi

±----------------------------------------------------------------------------------------+
| NVIDIA-SMI 565.77 Driver Version: 565.77 CUDA Version: 12.7 |
|-----------------------------------------±-----------------------±---------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+========================+======================|
| 0 NVIDIA GeForce RTX 4060 … Off | 00000000:01:00.0 On | N/A |
| N/A 41C P8 2W / 35W | 101MiB / 8188MiB | 0% Default |
| | | N/A |
±----------------------------------------±-----------------------±---------------------+

±----------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=========================================================================================|
| 0 N/A N/A 2486 G /usr/bin/gnome-shell 74MiB |
±----------------------------------------------------------------------------------------+

2

The system detects that something is connected to the RTX 400 HDMI port, but it is “off”. Are you using a docking station? If you unplug the HDMI cable and reconnect does the monitor come on?

My Dell systems have had multiple firmware updates since 2023, so you should check for updates from your vendor. Intel is working on new drivers for Iris Xe Graphics. Have a look at the Arch Linux on testing the new experimental Xe driver.

3

Thank you for your reply. I am using the HDMI port on my laptop to connect to an external monitor. I just tried unplugging and replugging the HDMI cable, and strangely, the external monitor suddenly flickers with a normal image before turning to a black screen, and ultimately still shows no signal.
My UEFI system is also the latest version.

4

You may get more details by running journalctl --nohostname -b --follow in a terminal while unplugging and replugging the HDMI cable.

5

I ran the command below and unplugged/replugged the HDMI cable.
Line 2 shows the output after disconnecting HDMI, and Line 3 shows the output after reconnecting it.
I don’t understand what these outputs mean, but they do provide new clues. I’ll search for related information. Thank you very much.

journalctl --no-hostname -b --follow 
Feb 10 11:13:45 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 34 with keysym 34 (keycode d).
Feb 10 11:13:47 geoclue[2036]: Failed to query location: Query location SOUP error: Not Found
Feb 10 11:13:50 gnome-shell[2515]: Created gbm renderer for '/dev/dri/card0'
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 38 with keysym 38 (keycode 11).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 39 with keysym 39 (keycode 12).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 34 with keysym 34 (keycode d).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 33 with keysym 33 (keycode c).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 38 with keysym 38 (keycode 11).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 31 with keysym 31 (keycode a).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 37 with keysym 37 (keycode 10).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 32 with keysym 32 (keycode b).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 35 with keysym 35 (keycode e).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 36 with keysym 36 (keycode f).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 32 with keysym 32 (keycode b).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 31 with keysym 31 (keycode a).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 33 with keysym 33 (keycode c).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 35 with keysym 35 (keycode e).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 39 with keysym 39 (keycode 12).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 34 with keysym 34 (keycode d).
Feb 10 11:13:50 gnome-shell[2515]: Window manager warning: Overwriting existing binding of keysym 37 with keysym 37 (keycode 10).
6

I tried rolling back to 6.11 kernel and manually installing the older Nvidia drivers as well as the latest test drivers following the guide at https://www.if-not-true-then-false.com/2015/fedora-nvidia-guide/, but the no signal issue remains unchanged.

7

On fedora it is usually seen and understood that installing the nvidia drivers from (or following the instructions from) INTTF usually results in less than desirable results.

My suggestion, as always, is to cleanly remove everything installed in that way then follow the instructions at Howto/NVIDIA - RPM Fusion as it seems you may have done initially.

First lets see exactly what is installed right now with dnf list --installed \*nvidia\* and the harware with inxi -Fzxx. Include lsmod | grep nvidia in that response.

Once we see that information as a starting point we should be able to attack the cause.

Your earlier post showed those command results, but now you have changed things a bit.

8

Thank you for your response. Yesterday, I performed a complete system reinstallation. When I did not install the RPM Fusion drivers, the external monitor worked normally, and I obtained the following output:

inxi -Fzxx 
inxi -Fzxx
System:
  Kernel: 6.12.11-200.fc41.x86_64 arch: x86_64 bits: 64 compiler: gcc
    v: 14.2.1
  Desktop: GNOME v: 47.4 tk: GTK v: 3.24.43 wm: gnome-shell dm: GDM
    Distro: Fedora Linux 41 (Workstation Edition)
Machine:
  Type: Laptop System: ASUSTeK product: Zenbook UX6404VV_UX6404VV v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX6404VV v: 1.0 serial: <superuser required>
    UEFI: American Megatrends LLC. v: UX6404VV.304 date: 11/02/2023
Battery:
  ID-1: BAT0 charge: 70.1 Wh (100.0%) condition: 70.1/76.0 Wh (92.2%)
    volts: 17.4 min: 15.9 model: ASUSTeK ASUS Battery serial: N/A status: full
  Device-1: hidpp_battery_0 model: Logitech G304 Lightspeed Wireless Gaming
    Mouse serial: <filter> charge: 100% (should be ignored)
    status: discharging
CPU:
  Info: 14-core (6-mt/8-st) model: 13th Gen Intel Core i9-13900H bits: 64
    type: MST AMCP arch: Raptor Lake rev: 2 cache: L1: 1.2 MiB L2: 11.5 MiB
    L3: 24 MiB
  Speed (MHz): avg: 400 min/max: 400/5200:5400:4100 cores: 1: 400 2: 400
    3: 400 4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400
    13: 400 14: 400 15: 400 16: 400 17: 400 18: 400 19: 400 20: 400
    bogomips: 119807
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel arch: Xe ports: active: eDP-1 empty: DP-1,DP-2
    bus-ID: 00:02.0 chip-ID: 8086:a7a0
  Device-2: NVIDIA AD107M [GeForce RTX 4060 Max-Q / Mobile] vendor: ASUSTeK
    driver: nouveau v: kernel arch: Lovelace pcie: speed: 2.5 GT/s lanes: 8
    ports: active: HDMI-A-1 empty: DP-3,eDP-2 bus-ID: 01:00.0
    chip-ID: 10de:28a0
  Device-3: Shinetech USB2.0 FHD UVC WebCam driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-9:4 chip-ID: 3277:0033
  Display: wayland server: Xwayland v: 24.1.5 compositor: gnome-shell
    driver: gpu: i915,nouveau display-ID: 0
  Monitor-1: HDMI-A-1 model-id: RTK 0x2560 res: 2560x1600 dpi: 227
    diag: 337mm (13.26")
  Monitor-2: eDP-1 model: Samsung 0x4190 res: 2880x1800 dpi: 234
    diag: 368mm (14.5")
  API: OpenGL v: 4.6 vendor: intel mesa v: 24.3.4 glx-v: 1.4 es-v: 3.2
    direct-render: yes renderer: Mesa Intel Iris Xe Graphics (RPL-P)
    device-ID: 8086:a7a0 display-ID: :0.0
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
  Info: Tools: api: glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel Raptor Lake-P/U/H cAVS vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl bus-ID: 00:1f.3 chip-ID: 8086:51ca
  Device-2: NVIDIA AD107 High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: speed: 2.5 GT/s lanes: 8
    bus-ID: 01:00.1 chip-ID: 10de:22be
  Device-3: Comtrue SIMGOT DEW4X driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-2:2 chip-ID: 2fc6:f074
  API: ALSA v: k6.12.11-200.fc41.x86_64 status: kernel-api
  Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:51f1
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 bus-ID: 3-10:5 chip-ID: 8087:0033
  Report: btmgmt ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 5.3
    lmp-v: 12
Drives:
  Local Storage: total: 2.29 TiB used: 483.43 GiB (20.7%)
  ID-1: /dev/nvme0n1 vendor: Smart Modular Tech. model: SHPP41-2000GM
    size: 1.82 TiB speed: 63.2 Gb/s lanes: 4 serial: <filter> temp: 31.9 C
  ID-2: /dev/sda vendor: Yangtze Memory model: ZHITAI TiPlus5000 512GB
    size: 476.94 GiB type: USB rev: 3.2 spd: 10 Gb/s lanes: 1 serial: <filter>
Partition:
  ID-1: / size: 505.51 GiB used: 19.27 GiB (3.8%) fs: btrfs
    dev: /dev/nvme0n1p8
  ID-2: /boot/efi size: 511 MiB used: 19.3 MiB (3.8%) fs: vfat
    dev: /dev/nvme0n1p6
  ID-3: /home size: 505.51 GiB used: 19.27 GiB (3.8%) fs: btrfs
    dev: /dev/nvme0n1p8
Swap:
  ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
  ID-2: swap-2 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p7
Sensors:
  System Temperatures: cpu: 32.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 32 GiB note: est. available: 30.97 GiB used: 3.76 GiB (12.1%)
  Processes: 468 Power: uptime: 10m wakeups: 0 Init: systemd v: 256
    target: graphical (5) default: graphical
  Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 9
    Compilers: N/A Shell: Zsh v: 5.9 running-in: ptyxis-agent inxi: 3.3.37
dnf list --installed \*nvidia\*

Installed packages
nvidia-gpu-firmware.noarch 20241210-1.fc41 updates

Then, I installed the RPM Fusion drivers again and rebooted, but the external monitor showed no signal. I received the following output:

inxi -Fzxx 
System:
  Kernel: 6.12.11-200.fc41.x86_64 arch: x86_64 bits: 64 compiler: gcc
    v: 14.2.1
  Desktop: GNOME v: 47.4 tk: GTK v: 3.24.43 wm: gnome-shell dm: GDM
    Distro: Fedora Linux 41 (Workstation Edition)
Machine:
  Type: Laptop System: ASUSTeK product: Zenbook UX6404VV_UX6404VV v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX6404VV v: 1.0 serial: <superuser required>
    UEFI: American Megatrends LLC. v: UX6404VV.304 date: 11/02/2023
Battery:
  ID-1: BAT0 charge: 70.1 Wh (100.0%) condition: 70.1/76.0 Wh (92.2%)
    volts: 17.4 min: 15.9 model: ASUSTeK ASUS Battery serial: N/A status: full
  Device-1: hidpp_battery_0 model: Logitech G304 Lightspeed Wireless Gaming
    Mouse serial: <filter> charge: 100% (should be ignored)
    status: discharging
CPU:
  Info: 14-core (6-mt/8-st) model: 13th Gen Intel Core i9-13900H bits: 64
    type: MST AMCP arch: Raptor Lake rev: 2 cache: L1: 1.2 MiB L2: 11.5 MiB
    L3: 24 MiB
  Speed (MHz): avg: 700 min/max: 400/5200:5400:4100 cores: 1: 700 2: 700
    3: 700 4: 700 5: 700 6: 700 7: 700 8: 700 9: 700 10: 700 11: 700 12: 700
    13: 700 14: 700 15: 700 16: 700 17: 700 18: 700 19: 700 20: 700
    bogomips: 119807
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel arch: Xe ports: active: eDP-1 empty: DP-1,DP-2
    bus-ID: 00:02.0 chip-ID: 8086:a7a0
  Device-2: NVIDIA AD107M [GeForce RTX 4060 Max-Q / Mobile] vendor: ASUSTeK
    driver: nvidia v: 565.77 arch: Lovelace pcie: speed: 2.5 GT/s lanes: 8
    ports: active: none off: HDMI-A-1 empty: DP-3,eDP-2 bus-ID: 01:00.0
    chip-ID: 10de:28a0
  Device-3: Shinetech USB2.0 FHD UVC WebCam driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-9:4 chip-ID: 3277:0033
  Display: wayland server: Xwayland v: 24.1.5 compositor: gnome-shell
    driver: gpu: i915,nvidia,nvidia-nvswitch display-ID: 0
  Monitor-1: HDMI-A-1 model-id: RTK 0x2560 res: 2560x1600 dpi: 227
    diag: 337mm (13.26")
  Monitor-2: eDP-1 model: Samsung 0x4190 res: 2880x1800 dpi: 234
    diag: 368mm (14.5")
  API: OpenGL v: 4.6 vendor: intel mesa v: 24.3.4 glx-v: 1.4 es-v: 3.2
    direct-render: yes renderer: Mesa Intel Iris Xe Graphics (RPL-P)
    device-ID: 8086:a7a0 display-ID: :0.0
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
  Info: Tools: api: glxinfo gpu: nvidia-settings,nvidia-smi x11: xdriinfo,
    xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel Raptor Lake-P/U/H cAVS vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl bus-ID: 00:1f.3 chip-ID: 8086:51ca
  Device-2: NVIDIA AD107 High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: speed: 2.5 GT/s lanes: 8
    bus-ID: 01:00.1 chip-ID: 10de:22be
  Device-3: Comtrue SIMGOT DEW4X driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-2:2 chip-ID: 2fc6:f074
  API: ALSA v: k6.12.11-200.fc41.x86_64 status: kernel-api
  Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:51f1
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 bus-ID: 3-10:5 chip-ID: 8087:0033
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
    lmp-v: 12
Drives:
  Local Storage: total: 2.29 TiB used: 484.19 GiB (20.7%)
  ID-1: /dev/nvme0n1 vendor: Smart Modular Tech. model: SHPP41-2000GM
    size: 1.82 TiB speed: 63.2 Gb/s lanes: 4 serial: <filter> temp: 37.9 C
  ID-2: /dev/sda vendor: Yangtze Memory model: ZHITAI TiPlus5000 512GB
    size: 476.94 GiB type: USB rev: 3.2 spd: 10 Gb/s lanes: 1 serial: <filter>
Partition:
  ID-1: / size: 505.51 GiB used: 20.03 GiB (4.0%) fs: btrfs
    dev: /dev/nvme0n1p8
  ID-2: /boot/efi size: 511 MiB used: 19.3 MiB (3.8%) fs: vfat
    dev: /dev/nvme0n1p6
  ID-3: /home size: 505.51 GiB used: 20.03 GiB (4.0%) fs: btrfs
    dev: /dev/nvme0n1p8
Swap:
  ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
  ID-2: swap-2 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p7
Sensors:
  System Temperatures: cpu: 38.8 C mobo: N/A
  Fan Speeds (rpm): cpu: 2000
Info:
  Memory: total: 32 GiB note: est. available: 30.97 GiB used: 4.08 GiB (13.2%)
  Processes: 475 Power: uptime: 7m wakeups: 0 Init: systemd v: 256
    target: graphical (5) default: graphical
  Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 9 Compilers:
    gcc: 14.2.1 Shell: Zsh v: 5.9 running-in: ptyxis-agent inxi: 3.3.37
dnf list --installed \*nvidia\*

Installed packages
akmod-nvidia.x86_64 3:565.77-1.fc41 rpmfusion-nonfree-nvidia-driver
kmod-nvidia-6.12.11-200.fc41.x86_64.x86_64 3:565.77-1.fc41 @commandline
nvidia-gpu-firmware.noarch 20241210-1.fc41 updates
nvidia-modprobe.x86_64 3:565.77-1.fc41 rpmfusion-nonfree-nvidia-driver
nvidia-persistenced.x86_64 3:565.77-1.fc41 rpmfusion-nonfree-nvidia-driver
nvidia-settings.x86_64 3:565.77-1.fc41 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia.x86_64 3:565.77-3.fc41 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-cuda.x86_64 3:565.77-3.fc41 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-cuda-libs.x86_64 3:565.77-3.fc41 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-kmodsrc.x86_64 3:565.77-3.fc41 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-libs.x86_64 3:565.77-3.fc41 rpmfusion-nonfree-nvidia-driver
xorg-x11-drv-nvidia-power.x86_64 3:565.77-3.fc41 rpmfusion-nonfree-nvidia-driver

lsmod | grep nvidia 
nvidia_drm            147456  17
nvidia_modeset       1671168  6 nvidia_drm
nvidia_uvm           3989504  0
nvidia              77516800  71 nvidia_uvm,nvidia_modeset
drm_ttm_helper         16384  2 nvidia_drm,xe
video                  81920  5 asus_wmi,asus_nb_wmi,xe,i915,nvidia_modeset